Manish K. Tiwari

Bio: Manish K. Tiwari is an academic researcher from University College London. The author has contributed to research in topics: Heat sink & Heat transfer. The author has an hindex of 32, co-authored 116 publications receiving 3794 citations. Previous affiliations of Manish K. Tiwari include University of Illinois at Chicago & University of Illinois at Urbana–Champaign.

Mechanism of supercooled droplet freezing on surfaces.

Abstract: Understanding ice formation from supercooled water on surfaces is a problem of fundamental importance and general utility. Superhydrophobic surfaces promise to have remarkable 'icephobicity' and low ice adhesion. Here we show that their icephobicity can be rendered ineffective by simple changes in environmental conditions. Through experiments, nucleation theory and heat transfer physics, we establish that humidity and/or the flow of a surrounding gas can fundamentally switch the ice crystallization mechanism, drastically affecting surface icephobicity. Evaporative cooling of the supercooled liquid can engender ice crystallization by homogeneous nucleation at the droplet-free surface as opposed to the expected heterogeneous nucleation at the substrate. The related interplay between droplet roll-off and rapid crystallization is also studied. Overall, we bring a novel perspective to icing and icephobicity, unveiling the strong influence of environmental conditions in addition to the accepted effects of the surface conditions and hydrophobicity.

All-organic superhydrophobic coatings with mechanochemical robustness and liquid impalement resistance.

Abstract: Superhydrophobicity is a remarkable evolutionary adaption manifested by several natural surfaces. Artificial superhydrophobic coatings with good mechanical robustness, substrate adhesion and chemical robustness have been achieved separately. However, a simultaneous demonstration of these features along with resistance to liquid impalement via high-speed drop/jet impact is challenging. Here, we describe all-organic, flexible superhydrophobic nanocomposite coatings that demonstrate strong mechanical robustness under cyclic tape peels and Taber abrasion, sustain exposure to highly corrosive media, namely aqua regia and sodium hydroxide solutions, and can be applied to surfaces through scalable techniques such as spraying and brushing. In addition, the mechanical flexibility of our coatings enables impalement resistance to high-speed drops and turbulent jets at least up to ~35 m s−1 and a Weber number of ~43,000. With multifaceted robustness and scalability, these coatings should find potential usage in harsh chemical engineering as well as infrastructure, transport vehicles and communication equipment.

On the Nanoengineering of Superhydrophobic and Impalement Resistant Surface Textures below the Freezing Temperature

Abstract: The superhydrophobic behavior of nano- and microtextured surfaces leading to rebound of impacting droplets is of great relevance to nature and technology. It is not clear however, if and under what conditions this behavior is maintained when such surfaces are severely undercooled possibly leading to the formation of frost and icing. Here we elucidate key aspects of this phenomenon and show that the outcome of rebound or impalement on a textured surface is affected by air compression underneath the impacting drop and the time scale allowing this air to escape. Remarkably, drop impalement occurred at identical impact velocities, both at room and at very low temperatures (−30 °C) and featured a ringlike liquid meniscus penetration into the surface texture with an entrapped air bubble in the middle. At low temperatures, the drop contact time and receding dynamics of hierarchical surfaces were profoundly influenced by both an increase in the liquid viscosity due to cooling and a partial meniscus penetration in...

Rational nanostructuring of surfaces for extraordinary icephobicity.

Abstract: Icing of surfaces is commonplace in nature, technology and everyday life, bringing with it sometimes catastrophic consequences. A rational methodology for designing materials with extraordinary resistance to ice formation and adhesion remains however elusive. We show that ultrafine roughnesses can be fabricated, so that the ice nucleation-promoting effect of nanopits on surfaces is effectively counteracted in the presence of an interfacial quasiliquid layer. The ensuing interface confinement strongly suppresses the stable formation of ice nuclei. We explain why such nanostructuring leads to the same extremely low, robust nucleation temperature of ∼−24 °C for over three orders of magnitude change in RMS size (∼0.1 to ∼100 nm). Overlaying such roughnesses on pillar-microtextures harvests the additional benefits of liquid repellency and low ice adhesion. When tested at a temperature of −21 °C, such surfaces delayed the freezing of a sessile supercooled water droplet at the same temperature by a remarkable 25 hours.

Aquasar: A hot water cooled data center with direct energy reuse

Abstract: We report the energy and exergy efficiencies of Aquasar, the first hot water cooled supercomputer prototype. The prototype also has an air cooled part to help compare the coolants's performances. For example, a chip/coolant temperature differential of only 15 °C was sufficient for chip cooling using water. The air cooled side, however, required air pre-cooling down to 23 °C and a chip/coolant temperature differential of 35 °C. Whereas extra exergy was expended for air pre-cooling, the higher thermal conductivity and specific heat capacity of water enabled coolant temperatures to be safely raised to 60 °C. Using such hot water not only eliminated the need for chillers, it also opened up the possibility of heat reuse. The latter was realized by using the hot water from Aquasar for building heating. A heat recovery efficiency of 80% and an exergetic efficiency of 34% were achieved with a water temperature of 60 °C. All these results establish hot water as a better coolant compared to air. A novel concept of economic value of heat was introduced to evaluate different reuse strategies such as space heating and refrigeration using adsorption chillers. It was shown that space heating offers the highest economic value for the heat recovered from data centers.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications

Abstract: Design, and Applications Shutao Wang,†,‡ Kesong Liu, Xi Yao, and Lei Jiang*,†,‡,§ †Laboratory of Bio-inspired Smart Interface Science, Technical Institute of Physics and Chemistry, and ‡Beijing National Laboratory for Molecular Science, Institute of Chemistry, Chinese Academy of Sciences, Beijing 100190, People’s Republic of China Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, School of Chemistry and Environment, BeiHang University, Beijing 100191, People’s Republic of China Department of Biomedical Sciences, City University of Hong Kong, Hong Kong P6903, People’s Republic of China

The ALICE Collaboration

Abstract: The production of mesons containing strange quarks (KS, φ) and both singly and doubly strange baryons ( , , and − + +) are measured at mid-rapidity in pp collisions at √ s = 0.9 TeV with the ALICE experiment at the LHC. The results are obtained from the analysis of about 250 k minimum bias events recorded in 2009. Measurements of yields (dN/dy) and transverse momentum spectra at mid-rapidity for inelastic pp collisions are presented. For mesons, we report yields (〈dN/dy〉) of 0.184 ± 0.002(stat.) ± 0.006(syst.) for KS and 0.021 ± 0.004(stat.) ± 0.003(syst.) for φ. For baryons, we find 〈dN/dy〉 = 0.048 ± 0.001(stat.) ± 0.004(syst.) for , 0.047 ± 0.002(stat.) ± 0.005(syst.) for and 0.0101 ± 0.0020(stat.)± 0.0009(syst.) for − + +. The results are also compared with predictions for identified particle spectra from QCD-inspired models and provide a baseline for comparisons with both future pp measurements at higher energies and heavy-ion collisions.