We present two different ways to fabricate nitrogen-doped graphene (N-graphene) and demonstrate its use as a metal-free catalyst to study the catalytic active center for the oxygen reduction reaction (ORR). N-graphene was produced by annealing of graphene oxide (G-O) under ammonia or by annealing of a N-containing polymer/reduced graphene oxide (RG-O) composite (polyaniline/RG-O or polypyrrole/RG-O). The effects of the N precursors and annealing temperature on the performance of the catalyst were investigated. The bonding state of the N atom was found to have a significant effect on the selectivity and catalytic activity for ORR. Annealing of G-O with ammonia preferentially formed graphitic N and pyridinic N centers, while annealing of polyaniline/RG-O and polypyrrole/RG-O tended to generate pyridinic and pyrrolic N moieties, respectively. Most importantly, the electrocatalytic activity of the catalyst was found to be dependent on the graphitic N content which determined the limiting current density, while the pyridinic N content improved the onset potential for ORR. However, the total N content in the graphene-based non-precious metal catalyst does not play an important role in the ORR process.

Exploration of the active center structure of nitrogen-doped graphene-based catalysts for oxygen reduction reaction

Colloidal synthesis offers a route to nanoparticles (NPs) with controlled composition and structural features. This Perspective describes the use of polyvinylpyrrolidone (PVP) to obtain such nanostructures. PVP can serve as a surface stabilizer, growth modifier, nanoparticle dispersant, and reducing agent. As shown with examples, its role depends on the synthetic conditions. This dependence arises from the amphiphilic nature of PVP along with the molecular weight of the selected PVP. These characteristics can affect nanoparticle growth and morphology by providing solubility in diverse solvents, selective surface stabilization, and even access to kinetically controlled growth conditions. This Perspective includes discussions of the properties of PVP-capped NPs for surface enhanced Raman spectroscopy (SERS), assembly, catalysis, and more. The contribution of PVP to these properties as well as its removal is considered. Ultimately, the NPs accessed through the use of PVP in colloidal syntheses are opening new applications, and the concluding guidelines provided herein should enable new nanostructures to be accessed facilely.

/pdf/polyvinylpyrrolidone-pvp-in-nanoparticle-synthesis-4i444sejw5.pdf

Polyvinylpyrrolidone (PVP) in nanoparticle synthesis

Membrane technology enhancement in oil–water separation. A review

Green synthesis of silver nanoparticles using latex of jatropha curcas

We analyze theoretically the optical properties of ideal semiconductor crystallites so small that they show quantum confinement in all three dimensions [quantum dots (QD's)]. In the limit of a QD much smaller than the bulk exciton size, the linear spectrum will be a series of lines, and we consider the phonon broadening of these lines. The lowest interband transition will saturate like a two-level system, without exchange and Coulomb screening. Depending on the broadening, the absorption and the changes in absorption and refractive index resulting from saturation can become very large, and the local-field effects can become so strong as to give optical bistability without external feedback. The small QD limit is more readily achieved with narrow-band-gap semiconductors.

Theory of the linear and nonlinear optical properties of semiconductor microcrystallites

Synthesis of Cadmium Sulphide nanoparticles

Effect of temperature and electron irradiation on the I–V characteristics of Au/CdTe Schottky diodes

Photoluminescence study of PVP capped CdS nanoparticles embedded in PVA matrix

The results of electrical conductivity and thermoelectric studies on antimony telluride, a promising thermoelectric material, in the thin film state are reported. Films were vacuum-deposited on to clean glass substrates with thickness between 50 and 200 nm and studied in the temperature interval 300 to 470 K. On heating the as-grown films, there is a sharp fall both in the Seebeck coefficient and the electrical resistivity at around 340 to 370 K for all the films. This is attributed to an amorphous to crystalline transition, which is confirmed by X-ray diffractogram and electron diffraction patterns.[/p]

Manjunatha Pattabi

Papers

Synthesis of Cadmium Sulphide nanoparticles

Effect of temperature and electron irradiation on the I–V characteristics of Au/CdTe Schottky diodes

Photoluminescence study of PVP capped CdS nanoparticles embedded in PVA matrix

Electrical conductivity and thermoelectric power of amorphous Sb2Te3 thin films and amorphous-crystalline transition

Synthesis and optical properties of CdS/ZnS coreshell nanoparticles