scispace - formally typeset
Search or ask a question
Author

Marc A. Meyers

Bio: Marc A. Meyers is an academic researcher from University of California, San Diego. The author has contributed to research in topics: Deformation (engineering) & Dislocation. The author has an hindex of 85, co-authored 487 publications receiving 36646 citations. Previous affiliations of Marc A. Meyers include University of California & Instituto Militar de Engenharia.


Papers
More filters
Journal ArticleDOI
01 Apr 2006-JOM
TL;DR: A review of the principal mechanisms responsible for the plastic deformation of nanocrystalline metals can be found in this article, where the authors show that with a decrease in grain size there is a gradual shift in the relative importance of the deformation mechanisms away from the ones operating in the conventional polycrystalline domain.
Abstract: This article presents a review of the principal mechanisms responsible for the plastic deformation of nanocrystalline metals. As the concentration of grain boundaries increases, with a decrease in grain size there is a gradual shift in the relative importance of the deformation mechanisms away from the ones operating in the conventional polycrystalline domain. This is predicted by molecular dynamics simulations that indicate a preponderance of dislocation emission/annihilation at grain boundaries and grain-boundary sliding when grain sizes are in the range 20–50 nm. Experiments show, in general, a saturation in work hardening at low strains, which is indicative of a steady-state dislocation density. This saturation is accompanied by an increased tendency toward shear localization, which is supportive of dislocation generation and annihilation at grain boundaries. Dislocation analyses recently proposed corroborate the computational predictions and provide a rational foundation for understanding the mechanical response.

76 citations

Journal ArticleDOI
TL;DR: In this paper, the deformation mechanism of nanocrystalline Ni at ultrahigh strain rates (>107s−1) was investigated, and it was shown that dislocation activity is a prevalent deformation mechanisms for the grain sizes studied.
Abstract: The deformation mechanism of nanocrystalline Ni (with grain sizes in the range of 30–100 nm) at ultrahigh strain rates (>107s−1) was investigated. A laser-driven compression process was applied to achieve high pressures (20–70 GPa) on nanosecond timescales and thus induce high-strain-rate deformation in the nanocrystalline Ni. Postmortem transmission electron microscopy examinations revealed that the nanocrystalline structures survive the shock deformation, and that dislocation activity is a prevalent deformation mechanism for the grain sizes studied. No deformation twinning was observed even at stresses more than twice the threshold for twin formation in micron-sized polycrystals. These results agree qualitatively with molecular dynamics simulations and suggest that twinning is a difficult event in nanocrystalline Ni under shock-loading conditions.

76 citations

Journal ArticleDOI
TL;DR: It is inferred, using molecular dynamics simulations and VISAR (standing for 'velocity interferometer system for any reflector') measurements, that the strength of the material increases dramatically (to approximately 1 GPa) for these extreme strain rates.
Abstract: In situ x-ray diffraction has been used to measure the shear strain (and thus strength) of single crystal copper shocked to 100 GPa pressures at strain rates over two orders of magnitude higher than those achieved previously. For shocks in the [001] direction there is a significant associated shear strain, while shocks in the [111] direction give negligible shear strain. We infer, using molecular dynamics simulations and VISAR (standing for 'velocity interferometer system for any reflector') measurements, that the strength of the material increases dramatically (to ~1 GPa) for these extreme strain rates.

76 citations

Journal ArticleDOI
TL;DR: In this paper, the authors presented a very high-pressure experiment on the National Ignition Facility (NIF) laser at Lawrence Livermore National Laboratory (LLNL) in the US.
Abstract: Solid-state dynamics experiments at very high pressures and strain rates are becoming possible with high-power laser facilities, albeit over brief intervals of time and spatially small scales. To achieve extreme pressures in the solid state requires that the sample be kept cool, with Tsample 103 GPa (10 Mbar), on the National Ignition Facility (NIF) laser at Lawrence Livermore National Laboratory.

74 citations

Journal ArticleDOI
TL;DR: In this paper, a review of impact resistant biological systems with a focus on their recurrent structural design elements, material properties, and energy absorbing mechanisms is presented, and the impact resistant structures at the micro- and meso-scales are classified into layered, gradient, tubular, sandwich and sutured.
Abstract: Biological systems must have the capability to withstand impacts generated during collisions due to combat and defense. Thus, evolution has created complex materials’ architectures at various length scales that are capable of withstanding repeated, low-to-medium-velocity impacts (up to 50 m/s). In this paper, we review impact resistant biological systems with a focus on their recurrent structural design elements, material properties, and energy absorbing mechanisms. We classify these impact resistant structures at the micro- and meso-scales into layered, gradient, tubular, sandwich, and sutured and show how they construct global hierarchical, composite, porous, and interfacial architectures. Additionally, we review how these individual structures and their design parameters can provide a tailored response. We conclude with a future outlook and discussion of their potential for impact resistant bioinspired designs.

74 citations


Cited by
More filters
01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

01 Jan 2016
TL;DR: The using multivariate statistics is universally compatible with any devices to read, allowing you to get the most less latency time to download any of the authors' books like this one.
Abstract: Thank you for downloading using multivariate statistics. As you may know, people have look hundreds times for their favorite novels like this using multivariate statistics, but end up in infectious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they juggled with some harmful bugs inside their laptop. using multivariate statistics is available in our digital library an online access to it is set as public so you can download it instantly. Our books collection saves in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Merely said, the using multivariate statistics is universally compatible with any devices to read.

14,604 citations

Journal ArticleDOI
01 Apr 1988-Nature
TL;DR: In this paper, a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) is presented.
Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

9,929 citations

Journal ArticleDOI
28 Jan 2000-Science
TL;DR: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a "nanostressing stage" located within a scanning electron microscope and a variety of structures were revealed, such as a nanotube ribbon, a wave pattern, and partial radial collapse.
Abstract: The tensile strengths of individual multiwalled carbon nanotubes (MWCNTs) were measured with a “nanostressing stage” located within a scanning electron microscope. The tensile-loading experiment was prepared and observed entirely within the microscope and was recorded on video. The MWCNTs broke in the outermost layer (“sword-in-sheath” failure), and the tensile strength of this layer ranged from 11 to 63 gigapascals for the set of 19 MWCNTs that were loaded. Analysis of the stress-strain curves for individual MWCNTs indicated that the Young's modulus E of the outermost layer varied from 270 to 950 gigapascals. Transmission electron microscopic examination of the broken nanotube fragments revealed a variety of structures, such as a nanotube ribbon, a wave pattern, and partial radial collapse.

5,011 citations