Marc-Henri Derron

Bio: Marc-Henri Derron is an academic researcher from University of Lausanne. The author has contributed to research in topics: Landslide & Rockfall. The author has an hindex of 23, co-authored 116 publications receiving 2213 citations. Previous affiliations of Marc-Henri Derron include University of Twente & Analysis Group.

Use of LIDAR in landslide investigations: a review

Abstract: This paper presents a short history of the appraisal of laser scanner technologies in geosciences used for imaging relief by high-resolution digital elevation models (HRDEMs) or 3D models. A general overview of light detection and ranging (LIDAR) techniques applied to landslides is given, followed by a review of different applications of LIDAR for landslide, rockfall and debris-flow. These applications are classified as: (1) Detection and characterization of mass movements; (2) Hazard assessment and susceptibility mapping; (3) Modelling; (4) Monitoring. This review emphasizes how LIDAR-derived HRDEMs can be used to investigate any type of landslides. It is clear that such HRDEMs are not yet a common tool for landslides investigations, but this technique has opened new domains of applications that still have to be developed.

Characterization and monitoring of the Åknes rockslide using terrestrial laser scanning

Abstract: . Terrestrial laser scanning (TLS) provides high-resolution point clouds of the topography and new TLS instruments with ranges exceeding 300 m or even 1000 m are powerful tools for characterizing and monitoring slope movements. This study focuses on the 35 million m3 Aknes rockslide in Western Norway, which is one of the most investigated and monitored rockslides in the world. The TLS point clouds are used for the structural analysis of the steep, inaccessible main scarp of the rockslide, including an assessment of the discontinuity sets and fold axes. TLS acquisitions in 2006, 2007 and 2008 provide information on 3-D displacements for the entire scanned area and are not restricted like conventional survey instruments to single measurement points. The affine transformation matrix between two TLS acquisitions precisely describes the rockslide displacements and enables their separation into translational components, such as the displacement velocity and direction, and rotational components, like toppling. This study shows the ability of TLS to obtain reliable 3-D displacement information over a large, unstable area. Finally, a possible instability model for the upper part of Aknes rockslide explains the measured translational and rotational displacements by a combination of southward planar sliding along the gneiss foliation, gravitational vertical settlement along the complex, stepped basal sliding surface and northward toppling toward the opened graben structure.

Rockfall hazard and risk assessments along roads at a regional scale: example in Swiss Alps

Abstract: . Unlike fragmental rockfall runout assessments, there are only few robust methods to quantify rock-mass-failure susceptibilities at regional scale. A detailed slope angle analysis of recent Digital Elevation Models (DEM) can be used to detect potential rockfall source areas, thanks to the Slope Angle Distribution procedure. However, this method does not provide any information on block-release frequencies inside identified areas. The present paper adds to the Slope Angle Distribution of cliffs unit its normalized cumulative distribution function. This improvement is assimilated to a quantitative weighting of slope angles, introducing rock-mass-failure susceptibilities inside rockfall source areas previously detected. Then rockfall runout assessment is performed using the GIS- and process-based software Flow-R, providing relative frequencies for runout. Thus, taking into consideration both susceptibility results, this approach can be used to establish, after calibration, hazard and risk maps at regional scale. As an example, a risk analysis of vehicle traffic exposed to rockfalls is performed along the main roads of the Swiss alpine valley of Bagnes.

Preface "LIDAR and DEM techniques for landslides monitoring and characterization"

Abstract: The collection of the 2008 EGU contributions presented in this special issue covers these various facets of the HRDEM related landslide research, including some of the first applications on cutting-edge topics such as monitoring or mobile scanning: Trevisani et al. (2009) use an airborne HRDEM to develop a quantitative spatial continuity index, based on a directional variography, to characterize and map the morphological features in a mixed environment of screes, debris flows, rockfalls and snow avalanches deposits in the Dolomite. Sturzenegger and Stead (2009) compare and combined terrestrial LIDAR and photogrammetry to characterize rock mass discontinuities, stressing the effects of the observation scales on orientation and persistence measurements. Both techniques are applied to the site of Franck slide (Alberta, Canada).

Experiences from site-specific landslide early warning systems

Abstract: . Landslide early warning systems (EWSs) have to be implemented in areas with large risk for populations or infrastructures when classical structural remediation measures cannot be set up. This paper aims to gather experiences of existing landslide EWSs, with a special focus on practical requirements (e.g., alarm threshold values have to take into account the smallest detectable signal levels of deployed sensors before being established) and specific issues when dealing with system implementations. Within the framework of the SafeLand European project, a questionnaire was sent to about one-hundred institutions in charge of landslide management. Finally, we interpreted answers from experts belonging to 14 operational units related to 23 monitored landslides. Although no standard requirements exist for designing and operating EWSs, this review highlights some key elements, such as the importance of pre-investigation work, the redundancy and robustness of monitoring systems, the establishment of different scenarios adapted to gradual increasing of alert levels, and the necessity of confidence and trust between local populations and scientists. Moreover, it also confirms the need to improve our capabilities for failure forecasting, monitoring techniques and integration of water processes into landslide conceptual models.

A reflectance model for computer graphics

Abstract: This paper presents a new reflectance model for rendering computer synthesized images. The model accounts for the relative brightness of different materials and light sources in the same scene. It describes the directional distribution of the reflected light and a color shift that occurs as the reflectance changes with incidence angle. The paper presents a method for obtaining the spectral energy distribution of the light reflected from an object made of a specific real material and discusses a procedure for accurately reproducing the color associated with the spectral energy distribution. The model is applied to the simulation of a metal and a plastic.

ANNALS of the Association of American Geographers

Abstract: Thirty-three brothels in rural and small-town Nevada, which contain between 225 and 250 prostitutes, are legal or openly tolerated and strictly controlled by state statute, city and county ordinances, and local rules. Twenty-two of the brothels are in places with populations between 500 and 8,000, and the remaining eleven are in rural areas. The legal and quasi-legal restrictions placed on prostitutes severely limit their activities outside brothels. These restrictions in conjunction with historical inertia, perceived benefits of crime and venereal disease control, and the good image of madams contribute to widespread positive local attitudes toward brothel prostitution. Interactions between clients and prostitutes in brothel parlors are also restricted and limited to a few basic types which are largely determined by entrepreneurial philosophy. KEY WORDS : Nevada, Political geography, Prostitution, Restricted activity spaces.