Marc Henry

Bio: Marc Henry is an academic researcher from University of Strasbourg. The author has contributed to research in topics: Aqueous solution & Oxide. The author has an hindex of 35, co-authored 127 publications receiving 8364 citations. Previous affiliations of Marc Henry include Pierre-and-Marie-Curie University & Centre national de la recherche scientifique.

A Rationale for the Large Breathing of the Porous Aluminum Terephthalate (MIL‐53) Upon Hydration

Abstract: Aluminum 1,4-benzenedicarboxylate Al(OH)[O2CC6H4CO2]⋅ [HO2CC6H4CO2H]0.70 or MIL-53 as (Al) has been hydrothermally synthesized by heating a mixture of aluminum nitrate, 1,4-benzenedicarboxylic acid, and water, for three days at 220 °C. Its 3 D framework is built up of infinite trans chains of corner-sharing AlO4(OH)2 octahedra. The chains are interconnected by the 1,4-benzenedicarboxylate groups, creating 1 D rhombic-shaped tunnels. Disordered 1,4-benzenedicarboxylic acid molecules are trapped inside these tunnels. Their evacuation upon heating, between 275 and 420 °C, leads to a nanoporous open-framework (MIL-53 ht (Al) or Al(OH)[O2CC6H4CO2]) with empty pores of diameter 8.5 A. This solid exhibits a Langmuir surface area of 1590(1) m2 g−1 together with a remarkable thermal stability, since it starts to decompose only at 500 °C. At room temperature, the solid reversibly absorbs water in its tunnels, causing a very large breathing effect and shrinkage of the pores. Analysis of the hydration process by solid-state NMR (1H, 13C, 27Al) has clearly indicated that the trapped water molecules interact with the carboxylate groups through hydrogen bonds, but do not affect the hydroxyl species bridging the aluminum atoms. The hydrogen bonds between water and the oxygen atoms of the framework are responsible for the contraction of the rhombic channels. The structures of the three forms have been determined by means of powder X-ray diffraction analysis. Crystal data for MIL-53 as (Al) are as follows: orthorhombic system, Pnma (no. 62), a = 17.129(2), b = 6.628(1), c = 12.182(1) A; for MIL-53 ht (Al), orthorhombic system, Imma (no. 74), a = 6.608(1), b = 16.675(3), c = 12.813(2) A; for MIL-53 lt (Al), monoclinic system, Cc (no. 9), a = 19.513(2), b = 7.612(1), c = 6.576(1) A, β = 104.24(1)°.

Chemical modification of alkoxide precursors

Abstract: The chemical reactivity of metal alkoxides offers a broad range of possibilities for chemical modification of these molecular precursors. The whole hydrolysis-condensation process may then be completely different leading to new products. An analysis is presented concerning some of the most common chemical additives used in the sol-gel process. Their role is explained in terms of chemical reactivity. The most important parameters appear to be the reactivity of the new ligand towards hydrolysis, the charge distribution in the new molecular precursor and the coordination numbers of the metal atom.

Hydrolysis of titanium alkoxides: modification of the molecular precursor by acetic acid

Abstract: Monolithic TiO 2 gels can be reproducibly obtained when the hydrolysis of titanium alkoxides is performed in the presence of acetic acid. This carboxilic acid does not act only as an acid catalyst, but also as a ligand and changes the alkoxide precursor at a molecular level therefore modifying the whole hydrolysis condensation process. Infra-red experiments show that bidentate acetates replace OR groups and are directly bounded to the titanium. Both, chelating and bridging acetates, are observed, leading to Ti(OR) x (Ac) y . oligomers. Hydrolysis of this new molecular precursor removes first (OR) groups and bridging acetates. Chelating acetates are still observed in the gel. They can only be removed upon heating above 200 °C.

Metal Oxide Chemistry and Synthesis: From Solution to Solid State

Abstract: INORGANIC CONDENSATION. Water and Cations in Aqueous Solution. Condensation and Precipitation in Aqueous Solution. Olation: Polycations and Solid Phases. Oxolation Polyanions and Solid Phases. Complexation and Condensation. SURFACE CHEMISTRY OF OXIDES. Oxide--Solution Interface. Modeling of the Oxide--Solution Interface. Stability of Colloidal Dispersions. Interface Reactions and Adsorption. Index.

Magnetic Iron Oxide Nanoparticles: Synthesis, Stabilization, Vectorization, Physicochemical Characterizations, and Biological Applications

Abstract: 1. Introduction 20642. Synthesis of Magnetic Nanoparticles 20662.1. Classical Synthesis by Coprecipitation 20662.2. Reactions in Constrained Environments 20682.3. Hydrothermal and High-TemperatureReactions20692.4. Sol-Gel Reactions 20702.5. Polyol Methods 20712.6. Flow Injection Syntheses 20712.7. Electrochemical Methods 20712.8. Aerosol/Vapor Methods 20712.9. Sonolysis 20723. Stabilization of Magnetic Particles 20723.1. Monomeric Stabilizers 20723.1.1. Carboxylates 20733.1.2. Phosphates 20733.2. Inorganic Materials 20733.2.1. Silica 20733.2.2. Gold 20743.3. Polymer Stabilizers 20743.3.1. Dextran 20743.3.2. Polyethylene Glycol (PEG) 20753.3.3. Polyvinyl Alcohol (PVA) 20753.3.4. Alginate 20753.3.5. Chitosan 20753.3.6. Other Polymers 20753.4. Other Strategies for Stabilization 20764. Methods of Vectorization of the Particles 20765. Structural and Physicochemical Characterization 20785.1. Size, Polydispersity, Shape, and SurfaceCharacterization20795.2. Structure of Ferro- or FerrimagneticNanoparticles20805.2.1. Ferro- and Ferrimagnetic Nanoparticles 20805.3. Use of Nanoparticles as Contrast Agents forMRI20825.3.1. High Anisotropy Model 20845.3.2. Small Crystal and Low Anisotropy EnergyLimit20855.3.3. Practical Interests of Magnetic NuclearRelaxation for the Characterization ofSuperparamagnetic Colloid20855.3.4. Relaxation of Agglomerated Systems 20856. Applications 20866.1. MRI: Cellular Labeling, Molecular Imaging(Inflammation, Apoptose, etc.)20866.2.

Lithium Batteries and Cathode Materials

Abstract: In the previous paper Ralph Brodd and Martin Winter described the different kinds of batteries and fuel cells. In this paper I will describe lithium batteries in more detail, building an overall foundation for the papers that follow which describe specific components in some depth and usually with an emphasis on the materials behavior. The lithium battery industry is undergoing rapid expansion, now representing the largest segment of the portable battery industry and dominating the computer, cell phone, and camera power source industry. However, the present secondary batteries use expensive components, which are not in sufficient supply to allow the industry to grow at the same rate in the next decade. Moreover, the safety of the system is questionable for the large-scale batteries needed for hybrid electric vehicles (HEV). Another battery need is for a high-power system that can be used for power tools, where only the environmentally hazardous Ni/ Cd battery presently meets the requirements. A battery is a transducer that converts chemical energy into electrical energy and vice versa. It contains an anode, a cathode, and an electrolyte. The anode, in the case of a lithium battery, is the source of lithium ions. The cathode is the sink for the lithium ions and is chosen to optimize a number of parameters, discussed below. The electrolyte provides for the separation of ionic transport and electronic transport, and in a perfect battery the lithium ion transport number will be unity in the electrolyte. The cell potential is determined by the difference between the chemical potential of the lithium in the anode and cathode, ∆G ) -EF. As noted above, the lithium ions flow through the electrolyte whereas the electrons generated from the reaction, Li ) Li+ + e-, go through the external circuit to do work. Thus, the electrode system must allow for the flow of both lithium ions and electrons. That is, it must be both a good ionic conductor and an electronic conductor. As discussed below, many electrochemically active materials are not good electronic conductors, so it is necessary to add an electronically conductive material such as carbon * To whom correspondence should be addressed. Phone and fax: (607) 777-4623. E-mail: stanwhit@binghamton.edu. 4271 Chem. Rev. 2004, 104, 4271−4301

Carbon Dioxide Capture in Metal–Organic Frameworks

Abstract: Kenji Sumida, David L. Rogow, Jarad A. Mason, Thomas M. McDonald, Eric D. Bloch, Zoey R. Herm, Tae-Hyun Bae, Jeffrey R. Long