Marc J. Assael

Bio: Marc J. Assael is an academic researcher from Aristotle University of Thessaloniki. The author has contributed to research in topics: Thermal conductivity & Viscosity. The author has an hindex of 41, co-authored 210 publications receiving 6864 citations. Previous affiliations of Marc J. Assael include Xi'an Jiaotong University & Imperial College London.

Standard Reference Data for the Thermal Conductivity of Water

Abstract: New experimental data on the thermal conductivity of liquid water along the saturation line have been obtained recently, using the bare and coated transient hot wire technique, with high accuracy. The quality of the data is such that new standard reference values can be proposed with confidence limits of 0.7% at a 95% confidence level. These data and the correlation herein presented revise a previous correlation endorsed by IUPAC.

Reference data for the density and viscosity of liquid aluminum and liquid iron

Abstract: The available experimental data for the density and viscosity of liquid aluminum and iron have been critically examined with the intention of establishing a density and a viscosity standard. All experimental data have been categorized into primary and secondary data according to the quality of measurement specified by a series of criteria. The proposed standard reference correlations for the density of the aluminum and iron are characterized by standard deviations of 0.65% and 0.77% at the 95% confidence level, respectively. The overall uncertainty in the absolute values of the density is estimated to be one of ±0.7% for aluminum and 0.8% for iron, which is worse than that of the most optimistic claims but recognizes the unexplained discrepancies between different methods. The standard reference correlations for the viscosity of aluminum and iron are characterized by standard deviations of 13.7% and 5.7% at the 95% confidence level, respectively. The uncertainty in the absolute values of the viscosity of the two metals is thought to be no larger than the scatter between measurements made with different techniques and so can be said to be ±14% in the case of aluminum and ±6% in the case of iron.

Thermal Conductivity of Suspensions of Carbon Nanotubes in Water

Abstract: The enhancement of the thermal conductivity of water in the presence of carbon-multiwall nanotubes (C-MWNT) was investigated. Sodium dodecyl sulfate (SDS) was employed as the dispersant, and a 0.6 vol% suspension of C-MWNT in water was used in all measurements. The thermal conductivity was measured with a transient hot-wire instrument built for this purpose, and operated with a standard uncertainty better than 2 The maximum thermal conductivity enhancement obtained was 38 %. In an attempt to explain the experimental observations, a number of micro-structural investigations have been carried out and those results are presented here along with the analysis.

New International Formulation for the Viscosity of H2O

Abstract: The International Association for the Properties of Water and Steam (IAPWS) encouraged an extensive research effort to update the IAPS Formulation 1985 for the Viscosity of Ordinary Water Substance, leading to the adoption of a Release on the IAPWS Formulation 2008 for the Viscosity of Ordinary Water Substance. This manuscript describes the development and evaluation of the 2008 formulation, which provides a correlating equation for the viscosity of water for fluid states up to 1173K and 1000MPa with uncertainties from less than 1% to 7% depending on the state point.

Thermal Conductivity Enhancement in Aqueous Suspensions of Carbon Multi-Walled and Double-Walled Nanotubes in the Presence of Two Different Dispersants

Abstract: Carbon multi-walled nanotubes (C-MWNTs) and alternatively carbon double-walled nanotubes (C-DWNTs) were added in water, following our previous work, in order to enhance the thermal conductivity of this traditional heat transfer fluid. Hexadecyltrimethyl ammonium bromide (CTAB) and Nanosperse AQ were employed as dispersants. The transient hot-wire technique was used for the measurement of the thermal conductivity with an instrument built for this purpose. The absolute uncertainty is better than 2%. The maximum thermal conductivity enhancement obtained was 34% for a 0.6% volume C-MWNT suspension in water with CTAB. All measurements were made at ambient temperature. In an attempt to evaluate and explain the experimental results, information about the microstructure of the suspensions is needed. The findings of these investigations are presented here along with the analysis.

A review on applications and challenges of nanofluids

Abstract: Nanofluids are potential heat transfer fluids with enhanced thermophysical properties and heat transfer performance can be applied in many devices for better performances (i.e. energy, heat transfer and other performances). In this paper, a comprehensive literature on the applications and challenges of nanofluids have been compiled and reviewed. Latest up to date literatures on the applications and challenges in terms of PhD and Master thesis, journal articles, conference proceedings, reports and web materials have been reviewed and reported. Recent researches have indicated that substitution of conventional coolants by nanofluids appears promising. Specific application of nanofluids in engine cooling, solar water heating, cooling of electronics, cooling of transformer oil, improving diesel generator efficiency, cooling of heat exchanging devices, improving heat transfer efficiency of chillers, domestic refrigerator-freezers, cooling in machining, in nuclear reactor and defense and space have been reviewed and presented. Authors also critically analyzed some of the applications and identified research gaps for further research. Moreover, challenges and future directions of applications of nanofluids have been reviewed and presented in this paper. Based on results available in the literatures, it has been found nanofluids have a much higher and strongly temperature-dependent thermal conductivity at very low particle concentrations than conventional fluids. This can be considered as one of the key parameters for enhanced performances for many of the applications of nanofluids. Because of its superior thermal performances, latest up to date literatures on this property have been summarized and presented in this paper as well. However, few barriers and challenges that have been identified in this review must be addressed carefully before it can be fully implemented in the industrial applications.

Pure and Pseudo-pure Fluid Thermophysical Property Evaluation and the Open-Source Thermophysical Property Library CoolProp.

Abstract: Over the last few decades, researchers have developed a number of empirical and theoretical models for the correlation and prediction of the thermophysical properties of pure fluids and mixtures treated as pseudo-pure fluids In this paper, a survey of all the state-of-the-art formulations of thermophysical properties is presented The most-accurate thermodynamic properties are obtained from multiparameter Helmholtz-energy-explicit-type formulations For the transport properties, a wider range of methods has been employed, including the extended corresponding states method All of the thermophysical property correlations described here have been implemented into CoolProp, an open-source thermophysical property library This library is written in C++, with wrappers available for the majority of programming languages and platforms of technical interest As of publication, 110 pure and pseudo-pure fluids are included in the library, as well as properties of 40 incompressible fluids and humid air The source code for the CoolProp library is included as an electronic annex

Handbook of Optical Materials

Abstract: CRYSTALLINE MATERIALS Introduction Physical Properties Optical Properties Mechanical Properties Thermal Properties Magnetooptic Properties Electrooptic Properties Elastooptic Properties Nonlinear Optical Properties GLASSES Introduction Commercial Optical Glasses Specialty Optical Glasses Fused Silica Fluoride Glasses Chalcogenide Glasses Magnetooptic Properties Electrooptic Properties Elastooptic Properties Nonlinear Optical Properties Special Glasses POLYMERIC MATERIALS Optical Plastics Index of Refraction Nonlinear Optical Properties Thermal Properties Engineering Data METALS Physical Properties of Selected Metals Optical Properties Mechanical Properties Thermal Properties Mirror Substrate Materials LIQUIDS Introduction Water Physical Properties of Selected Liquids Index of Refraction Nonlinear Optical Properties Magnetooptic Properties Commercial Optical Liquids GASES Introduction Physical Properties of Selected Gases Index of Refraction Nonlinear Optical Properties Magnetooptic Properties Atomic Resonance Filters APPENDICES Safe Handling of Optical Materials Abbreviations, Acronyms, and Mineralogical or Common Names for Optical Materials Abbreviations for Methods of Preparing Optical Materials and Thin Films Fundamental Physical Constants Units and Conversion Factors