Marc Respaud

Bio: Marc Respaud is an academic researcher from University of Toulouse. The author has contributed to research in topics: Magnetization & Nanoparticle. The author has an hindex of 46, co-authored 185 publications receiving 8753 citations. Previous affiliations of Marc Respaud include Paul Sabatier University & University of Kent.

Simple models for dynamic hysteresis loop calculations of magnetic single-domain nanoparticles: Application to magnetic hyperthermia optimization

Abstract: To optimize the heating properties of magnetic nanoparticles (MNPs) in magnetic hyperthermia applications, it is necessary to calculate the area of their hysteresis loops in an alternating magnetic field. The separation between “relaxation losses” and “hysteresis losses” presented in several articles is artificial and criticized here. The three types of theories suitable for describing hysteresis loops of MNPs are presented and compared to numerical simulations: equilibrium functions, Stoner–Wohlfarth model based theories (SWMBTs), and a linear response theory (LRT) using the Neel–Brown relaxation time. The configuration where the easy axis of the MNPs is aligned with respect to the magnetic field and the configuration of a random orientation of the easy axis are both studied. Suitable formulas to calculate the hysteresis areas of major cycles are deduced from SWMBTs and from numerical simulations; the domain of validity of the analytical formula is explicitly studied. In the case of minor cycles, the hysteresis area calculations are based on the LRT. A perfect agreement between the LRT and numerical simulations of hysteresis loops is obtained. The domain of validity of the LRT is explicitly studied. Formulas are proposed to calculate the hysteresis area at low field that are valid for any anisotropy of the MNP. The magnetic field dependence of the area is studied using numerical simulations: it follows power laws with a large range of exponents. Then analytical expressions derived from the LRT and SWMBTs are used in their domains of validity for a theoretical study of magnetic hyperthermia. It is shown that LRT is only pertinent for MNPs with strong anisotropy and that SWMBTs should be used for weakly anisotropic MNPs. The optimum volume of MNPs for magnetic hyperthermia is derived as a function of material and experimental parameters. Formulas are proposed to allow to the calculation of the optimum volume for any anisotropy. The maximum achievable specific absorption rate (SAR) is calculated as a function of the MNP anisotropy. It is shown that an optimum anisotropy increases the SAR and reduces the detrimental effects of the size distribution of the MNPs. The optimum anisotropy is simple to calculate; it depends only on the magnetic field used in the hyperthermia experiments and the MNP magnetization. The theoretical optimum parameters are compared to those of several magnetic materials. A brief review of experimental results as well as a method to analyze them is proposed. This study helps in the determination of suitable and unsuitable materials for magnetic hyperthermia and provides accurate formulas to analyze experimental data. It is also aimed at providing a better understanding of magnetic hyperthermia to researchers working on this subject.

Simple models for dynamic hysteresis loops calculation: Application to hyperthermia optimization

Abstract: To optimize the heating properties of magnetic nanoparticles (MNPs) in magnetic hyperthermia applications, it is necessary to calculate the area of their hysteresis loops in an alternating magnetic field. The three types of theories suitable for describing the hysteresis loops of MNPs are presented and compared to numerical simulations: equilibrium functions, Stoner-Wohlfarth model based theories (SWMBTs) and linear response theory (LRT). Suitable formulas to calculate the hysteresis area of major cycles are deduced from SWMBTs and from numerical simulations; the domain of validity of the analytical formula is explicitly studied. In the case of minor cycles, the hysteresis area calculations are based on the LRT. A perfect agreement between LRT and numerical simulations of hysteresis loops is obtained. The domain of validity of the LRT is explicitly studied. Formulas to calculate the hysteresis area at low field valid for any anisotropy of the MNP are proposed. Numerical simulations of the magnetic field dependence of the area show it follows power-laws with a large range of exponents. Then, analytical expressions derived from LRT and SWMBTs are used for a theoretical study of magnetic hyperthermia. It is shown that LRT is only pertinent for MNPs with strong anisotropy and that SWMBTs should be used for weak anisotropy MNPs. The optimum volume of MNPs for magnetic hyperthermia as function of material and experimental parameters is derived. The maximum specific absorption rate (SAR) achievable is calculated versus the MNP anisotropy. It is shown that an optimum anisotropy increases the SAR and reduces the detrimental effects of size distribution. The optimum anisotropy is simple to calculate and depends on the magnetic field used in the hyperthermia experiments and on the MNP magnetization only. The theoretical optimum parameters are compared to the one of several magnetic materials.

On-chip and freestanding elastic carbon films for micro-supercapacitors

Abstract: Integration of electrochemical capacitors with silicon-based electronics is a major challenge, limiting energy storage on a chip. We describe a wafer-scale process for manufacturing strongly adhering carbide-derived carbon films and interdigitated micro-supercapacitors with embedded titanium carbide current collectors, fully compatible with current microfabrication and silicon-based device technology. Capacitance of those films reaches 410 farads per cubic centimeter/200 millifarads per square centimeter in aqueous electrolyte and 170 farads per cubic centimeter/85 millifarads per square centimeter in organic electrolyte. We also demonstrate preparation of self-supported, mechanically stable, micrometer-thick porous carbon films with a Young’s modulus of 14.5 gigapascals, with the possibility of further transfer onto flexible substrates. These materials are interesting for applications in structural energy storage, tribology, and gas separation.

Surface effects on the magnetic properties of ultrafine cobalt particles

Abstract: Monodispersed nanoparticles of cobalt have been prepared by an original method using the decomposition under hydrogen of an organometallic precursor in the presence of a stabilizing polymer. Two colloids (Coll-I and Coll-II) have been obtained by changing the organometallic concentration in the polymer. Observation by high-resolution transmission electronic microscopy (HRTEM) showed Co particles well isolated and regularly dispersed in the polymer with a very narrow size distribution centered around 1.5 nm (Coll-I) and 2 nm (Coll-II) diameter. These particles are superparamagnetic above the blocking temperature 9 K (Coll-I) and 13.5 K (Coll-II). The particle size deduced from the analyses of the magnetic susceptibilities and magnetization curves are consistent with those measured by HRTEM. Magnetization at 5 K seems to saturate in fields up to 5 T leading to an enhanced mean magnetic moment per atom for both samples, where $〈{\ensuremath{\mu}}_{\mathrm{Co}}〉=1.94\ifmmode\pm\else\textpm\fi{}0.05$ ${\ensuremath{\mu}}_{B}$ for the smallest particles. High-field magnetization measurements, up to 35 T, increases nearly linearly with the applied field. This is equivalent to an increase of the mean magnetic moment with $〈{\ensuremath{\mu}}_{\mathrm{Co}}〉=2.1\ifmmode\pm\else\textpm\fi{}0.1$ ${\ensuremath{\mu}}_{B}$ at 35 T for the smallest particles. The effective magnetic anisotropies are found to be larger than that of the bulk materials and decrease with increasing particle size. This set of data allows us to conclude that the enhanced magnetization, its increase with applied magnetic field, and the enhanced effective magnetic anisotropy are associated with the large influence of the surface atoms and are more significant with decreasing size.

Synthesis and Magnetic Properties of Nickel Nanorods

Abstract: Nickel nanoparticles of tunable shape have been synthesized in THF, in the presence of hexadecylamine (HDA) or trioctylphosphineoxide (TOPO), in mild conditions and characterized by HREM and SQUID measurements. The formation of nanorods is promoted by a high amine content in the reaction medium. In contrast to what is observed for TOPO-protected nickel particles, the saturation magnetization of HDA-capped nanoparticles is comparable to that of bulk nickel, which demonstrates that the coordination of an amine ligand does not alter the magnetic properties of nickel.

Chemistry and properties of nanocrystals of different shapes.

Abstract: The interest in nanoscale materials stems from the fact that new properties are acquired at this length scale and, equally important, that these properties * To whom correspondence should be addressed. Phone, 404-8940292; fax, 404-894-0294; e-mail, mostafa.el-sayed@ chemistry.gatech.edu. † Case Western Reserve UniversitysMillis 2258. ‡ Phone, 216-368-5918; fax, 216-368-3006; e-mail, burda@case.edu. § Georgia Institute of Technology. 1025 Chem. Rev. 2005, 105, 1025−1102

Shape-Controlled Synthesis of Gold and Silver Nanoparticles

Abstract: Monodisperse samples of silver nanocubes were synthesized in large quantities by reducing silver nitrate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP). These cubes were single crystals and were characterized by a slightly truncated shape bounded by {100}, {110}, and {111} facets. The presence of PVP and its molar ratio (in terms of repeating unit) relative to silver nitrate both played important roles in determining the geometric shape and size of the product. The silver cubes could serve as sacrificial templates to generate single-crystalline nanoboxes of gold: hollow polyhedra bounded by six {100} and eight {111} facets. Controlling the size, shape, and structure of metal nanoparticles is technologically important because of the strong correlation between these parameters and optical, electrical, and catalytic properties.

Magnetic nanoparticles: Synthesis, protection, functionalization, and application

Abstract: This review focuses on the synthesis, protection, functionalization, and application of magnetic nanoparticles, as well as the magnetic properties of nanostructured systems. Substantial progress in the size and shape control of magnetic nanoparticles has been made by developing methods such as co-precipitation, thermal decomposition and/or reduction, micelle synthesis, and hydrothermal synthesis. A major challenge still is protection against corrosion, and therefore suitable protection strategies will be emphasized, for example, surfactant/polymer coating, silica coating and carbon coating of magnetic nanoparticles or embedding them in a matrix/support. Properly protected magnetic nanoparticles can be used as building blocks for the fabrication of various functional systems, and their application in catalysis and biotechnology will be briefly reviewed. Finally, some future trends and perspectives in these research areas will be outlined.

Magnetic Iron Oxide Nanoparticles: Synthesis, Stabilization, Vectorization, Physicochemical Characterizations, and Biological Applications

Abstract: 1. Introduction 20642. Synthesis of Magnetic Nanoparticles 20662.1. Classical Synthesis by Coprecipitation 20662.2. Reactions in Constrained Environments 20682.3. Hydrothermal and High-TemperatureReactions20692.4. Sol-Gel Reactions 20702.5. Polyol Methods 20712.6. Flow Injection Syntheses 20712.7. Electrochemical Methods 20712.8. Aerosol/Vapor Methods 20712.9. Sonolysis 20723. Stabilization of Magnetic Particles 20723.1. Monomeric Stabilizers 20723.1.1. Carboxylates 20733.1.2. Phosphates 20733.2. Inorganic Materials 20733.2.1. Silica 20733.2.2. Gold 20743.3. Polymer Stabilizers 20743.3.1. Dextran 20743.3.2. Polyethylene Glycol (PEG) 20753.3.3. Polyvinyl Alcohol (PVA) 20753.3.4. Alginate 20753.3.5. Chitosan 20753.3.6. Other Polymers 20753.4. Other Strategies for Stabilization 20764. Methods of Vectorization of the Particles 20765. Structural and Physicochemical Characterization 20785.1. Size, Polydispersity, Shape, and SurfaceCharacterization20795.2. Structure of Ferro- or FerrimagneticNanoparticles20805.2.1. Ferro- and Ferrimagnetic Nanoparticles 20805.3. Use of Nanoparticles as Contrast Agents forMRI20825.3.1. High Anisotropy Model 20845.3.2. Small Crystal and Low Anisotropy EnergyLimit20855.3.3. Practical Interests of Magnetic NuclearRelaxation for the Characterization ofSuperparamagnetic Colloid20855.3.4. Relaxation of Agglomerated Systems 20856. Applications 20866.1. MRI: Cellular Labeling, Molecular Imaging(Inflammation, Apoptose, etc.)20866.2.

Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?

Abstract: Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution-phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape-controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.