Marc Thevenot

Bio: Marc Thevenot is an academic researcher from University of Limoges. The author has contributed to research in topics: Antenna (radio) & Antenna measurement. The author has an hindex of 19, co-authored 153 publications receiving 2018 citations. Previous affiliations of Marc Thevenot include Centre national de la recherche scientifique.

Directive photonic-bandgap antennas

Abstract: This paper introduces two new photonic bandgap (PBG) material applications for antennas, in which a photonic parabolic reflector is studied. It is composed of dielectric parabolic layers associated to obtain a PBG material. The frequency gap is used to reflect and focus the electromagnetic waves. This device has been designed using a finite-difference time-domain (FDTD) code. FDTD computations have provided the theoretical reflector's directivity. These results are in good agreement with measurements, and it appears that the PBG reflector presents the same directivity as a metallic parabola. A second application uses a defect PBG material mode associated with a metallic plate to increase the directivity of a patch antenna. We explain the design of such a device and propose experimental results to validate the theoretical analysis.

An electromagnetic bandgap resonator antenna

Abstract: This paper introduces a new explanation of the electromagnetic bandgap (EBG) material properties using the study of the EBG structures in the frequency domain and reciprocal space. Once the behavior of such a material is understood, the properties of the EBG are used in order to make an EBG antenna. The antenna is realized with dielectric EBG rods. Its directivity is increased compared to a simple patch antenna. Such a device allows us to obtain a high gain with a very thin structure.

Mutual Synthesis of Combined Microwave Circuits Applied to the Design of a Filter-Antenna Subsystem

Abstract: A mutual-synthesis approach is presented for the design of subsystems combining two microwave circuits. In this paper, we are focused on subsystems combining a filter and an antenna. In a first step, the methodology consists of synthesizing the global subsystem, which realizes both filtering and radiation functions, with respect to overall specifications. Considering circuits interactions within the subsystem, the resulting constraints are distributed optimally between the two circuits. The latter mutual synthesis then leads, on one hand, to a set of optimal impedances for their connection and, on the other hand, to the corresponding ideal characteristics of each circuit. A solution can then be selected by carrying out a compromise between the simplicity of achieving the characteristics of each circuit and the performances and compactness of the subsystem. In a second step, the circuits are designed independently with respect to the synthesized characteristics. Compared to a classical synthesis approach, where circuits are synthesized independently with respect to a common reference impedance (generally 50 or 75 Omega), the proposed mutual synthesis allows to simplify the global subsystem since interactions between the two circuits are considered and used optimally. The technique is illustrated with the design of a filter-antenna at Ku-band.

Circularly polarized metallic EBG antenna

Abstract: This letter describes the concept and the realization of a directive and circularly polarized antenna using an electromagnetic band gap material whose circular polarization is generated by the structure itself. Experimental and simulated results are presented for an antenna operating at 5GHz.

A FDTD scheme for the computation of VLF-LF propagation in the anisotropic earth-ionosphere waveguide

Abstract: De part la presence du champ magnetique naturel, l’ionosphere terrestre est un milieu anisotrope de type gyrotropique. Cet article presente un schema numerique aux differences finies adapte a ce milieu, developpe pour calculer la propagation des ondes VLF-LF dans le guide d’onde constitue de la terre et de l’ionosphere. Le schema est decrit en detail, avec une attention particuliere portee a la question de la stabilite numerique.

Leaky-Wave Antennas

Abstract: This paper gives a basic review and a summary of recent developments for leaky-wave antennas (LWAs). An LWA uses a guiding structure that supports wave propagation along the length of the structure, with the wave radiating or “leaking” continuously along the structure. Such antennas may be uniform, quasi-uniform, or periodic. After reviewing the basic physics and operating principles, a summary of some recent advances for these types of structures is given. Recent advances include structures that can scan to endfire, structures that can scan through broadside, structures that are conformal to surfaces, and structures that incorporate power recycling or include active elements. Some of these novel structures are inspired by recent advances in the metamaterials area.

Artificial magnetic conductor surfaces and their application to low-profile high-gain planar antennas

Abstract: Planar periodic metallic arrays behave as artificial magnetic conductor (AMC) surfaces when placed on a grounded dielectric substrate and they introduce a zero degrees reflection phase shift to incident waves. In this paper the AMC operation of single-layer arrays without vias is studied using a resonant cavity model and a new application to high-gain printed antennas is presented. A ray analysis is employed in order to give physical insight into the performance of AMCs and derive design guidelines. The bandwidth and center frequency of AMC surfaces are investigated using full-wave analysis and the qualitative predictions of the ray model are validated. Planar AMC surfaces are used for the first time as the ground plane in a high-gain microstrip patch antenna with a partially reflective surface as superstrate. A significant reduction of the antenna profile is achieved. A ray theory approach is employed in order to describe the functioning of the antenna and to predict the existence of quarter wavelength resonant cavities.

Leaky‐Wave Antennas

Abstract: This chapter contains sections titled: Introduction History Classification of Leaky‐Wave Antennas Physics of Leaky Waves Radiation Properties of One‐Dimensional Leaky‐Wave Antennas Radiation Properties of Two‐Dimensional Leaky‐Wave Antennas Conclusions Acknowledgment References

Multibeam Antenna Technologies for 5G Wireless Communications

Abstract: With the demanding system requirements for the fifth-generation (5G) wireless communications and the severe spectrum shortage at conventional cellular frequencies, multibeam antenna systems operating in the millimeter-wave frequency bands have attracted a lot of research interest and have been actively investigated. They represent the key antenna technology for supporting a high data transmission rate, an improved signal-to-interference-plus-noise ratio, an increased spectral and energy efficiency, and versatile beam shaping, thereby holding a great promise in serving as the critical infrastructure for enabling beamforming and massive multiple-input multiple-output (MIMO) that boost the 5G. This paper provides an overview of the existing multibeam antenna technologies which include the passive multibeam antennas (MBAs) based on quasi-optical components and beamforming circuits, multibeam phased-array antennas enabled by various phase-shifting methods, and digital MBAs with different system architectures. Specifically, their principles of operation, design, and implementation, as well as a number of illustrative application examples are reviewed. Finally, the suitability of these MBAs for the future 5G massive MIMO wireless systems as well as the associated challenges is discussed.

Electromagnetic Band Gap Structures in Antenna Engineering

Abstract: Preface 1. Introduction 2. FDTD Method for periodic structure analysis 3. EBG Characterizations and classifications 4. Design and optimizations of EBG structures 5. Patch antennas with EBG structures 6. Low profile wire antennas on EBG surfaces 7. Surface wave antennas Appendix: EBG literature review.