Marcos A. Bizeto

Bio: Marcos A. Bizeto is an academic researcher from Federal University of São Paulo. The author has contributed to research in topics: Silver nanoparticle & Ionic liquid. The author has an hindex of 17, co-authored 40 publications receiving 834 citations. Previous affiliations of Marcos A. Bizeto include Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto & University of São Paulo.

Layered niobate nanosheets: building blocks for advanced materials assembly

Abstract: Layered materials with intracrystalline reactivity undergo intercalation and pillaring reactions to produce materials with useful properties for catalysis, electrodes for Li batteries and adsorbents. New possibilities for the use of layered inorganic solids came out from the layered structures capable of delamination. The exfoliated particles are considered a new class of nanomaterial based on single crystal nanosheets. Due to their unique morphological features and properties, these nanosheets can be used as building blocks for nanomaterials with innovative properties. In this feature article we describe the aspects related to layered niobate exfoliation and the new possibilities that arises from the use of niobate nanosheets in the manufacturing of thin films, layer-by-layer (LbL) assemblies, hybrid structures, sensors and other materials.

One-pot synthesis of a polyaniline–silver nanocomposite prepared in ionic liquid

Abstract: A mixture of aniline and a silver salt in ionic liquid has afforded a composite of PANI, in its more conducting form, and silver nanoparticles through a single-step direct reaction, without addition of any acid species or template. An ionic liquid acted as the solvent and template for the nanostructured material. The silver salt (AgTf2N) used in this work is soluble in the chosen ionic liquid, which is not an usual characteristic. TEM analysis of the obtained composite showed the presence of rounded silver nanoparticles with average diameter size around 10–20 nm uniformly dispersed in the polymeric matrix. XRD corroborates the size of the metallic particles at the nanoscale. FTIR and UV-vis confirmed that PANI was obtained in emeraldine salt form. The composite is slightly soluble in DMSO, an unusual feature for bulk conducting polyaniline. The composite shows electrical conductivity 100 times higher than bulk PANI prepared by usual procedures and its electroactivity was studied by cyclic voltammetry. Therefore, in this study it was shown that Ag+, in ionic liquid, is able to quickly oxidize the aniline to PANI, which is not observed in another media.

Progress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene

Abstract: Graphene’s success has shown that it is possible to create stable, single and few-atom-thick layers of van der Waals materials, and also that these materials can exhibit fascinating and technologically useful properties. Here we review the state-of-the-art of 2D materials beyond graphene. Initially, we will outline the different chemical classes of 2D materials and discuss the various strategies to prepare single-layer, few-layer, and multilayer assembly materials in solution, on substrates, and on the wafer scale. Additionally, we present an experimental guide for identifying and characterizing single-layer-thick materials, as well as outlining emerging techniques that yield both local and global information. We describe the differences that occur in the electronic structure between the bulk and the single layer and discuss various methods of tuning their electronic properties by manipulating the surface. Finally, we highlight the properties and advantages of single-, few-, and many-layer 2D materials in...

Liquid Exfoliation of Layered Materials

Abstract: Background Since at least 400 C.E., when the Mayans first used layered clays to make dyes, people have been harnessing the properties of layered materials. This gradually developed into scientific research, leading to the elucidation of the laminar structure of layered materials, detailed understanding of their properties, and eventually experiments to exfoliate or delaminate them into individual, atomically thin nanosheets. This culminated in the discovery of graphene, resulting in a new explosion of interest in two-dimensional materials. Layered materials consist of two-dimensional platelets weakly stacked to form three-dimensional structures. The archetypal example is graphite, which consists of stacked graphene monolayers. However, there are many others: from MoS 2 and layered clays to more exotic examples such as MoO 3 , GaTe, and Bi 2 Se 3 . These materials display a wide range of electronic, optical, mechanical, and electrochemical properties. Over the past decade, a number of methods have been developed to exfoliate layered materials in order to produce monolayer nanosheets. Such exfoliation creates extremely high-aspect-ratio nanosheets with enormous surface area, which are ideal for applications that require surface activity. More importantly, however, the two-dimensional confinement of electrons upon exfoliation leads to unprecedented optical and electrical properties. Liquid exfoliation of layered crystals allows the production of suspensions of two-dimensional nanosheets, which can be formed into a range of structures. (A) MoS 2 powder. (B) WS 2 dispersed in surfactant solution. (C) An exfoliated MoS 2 nanosheet. (D) A hybrid material consisting of WS 2 nanosheets embedded in a network of carbon nanotubes. Advances An important advance has been the discovery that layered crystals can be exfoliated in liquids. There are a number of methods to do this that involve oxidation, ion intercalation/exchange, or surface passivation by solvents. However, all result in liquid dispersions containing large quantities of nanosheets. This brings considerable advantages: Liquid exfoliation allows the formation of thin films and composites, is potentially scaleable, and may facilitate processing by using standard technologies such as reel-to-reel manufacturing. Although much work has focused on liquid exfoliation of graphene, such processes have also been demonstrated for a host of other materials, including MoS 2 and related structures, layered oxides, and clays. The resultant liquid dispersions have been formed into films, hybrids, and composites for a range of applications. Outlook There is little doubt that the main advances are in the future. Multifunctional composites based on metal and polymer matrices will be developed that will result in enhanced mechanical, electrical, and barrier properties. Applications in energy generation and storage will abound, with layered materials appearing as electrodes or active elements in devices such as displays, solar cells, and batteries. Particularly important will be the use of MoS 2 for water splitting and metal oxides as hydrogen evolution catalysts. In addition, two-dimensional materials will find important roles in printed electronics as dielectrics, optoelectronic devices, and transistors. To achieve this, much needs to be done. Production rates need to be increased dramatically, the degree of exfoliation improved, and methods to control nanosheet properties developed. The range of layered materials that can be exfoliated must be expanded, even as methods for chemical modification must be developed. Success in these areas will lead to a family of materials that will dominate nanomaterials science in the 21st century.

Two-dimensional transition metal carbides.

Abstract: Herein we report on the synthesis of two-dimensional transition metal carbides and carbonitrides by immersing select MAX phase powders in hydrofluoric acid, HF. The MAX phases represent a large (>60 members) family of ternary, layered, machinable transition metal carbides, nitrides, and carbonitrides. Herein we present evidence for the exfoliation of the following MAX phases: Ti2AlC, Ta4AlC3, (Ti0.5,Nb0.5)2AlC, (V0.5,Cr0.5)3AlC2, and Ti3AlCN by the simple immersion of their powders, at room temperature, in HF of varying concentrations for times varying between 10 and 72 h followed by sonication. The removal of the “A” group layer from the MAX phases results in 2-D layers that we are labeling MXenes to denote the loss of the A element and emphasize their structural similarities with graphene. The sheet resistances of the MXenes were found to be comparable to multilayer graphene. Contact angle measurements with water on pressed MXene surfaces showed hydrophilic behavior.

2D materials: to graphene and beyond

Abstract: This review is an attempt to illustrate the different alternatives in the field of 2D materials. Graphene seems to be just the tip of the iceberg and we show how the discovery of alternative 2D materials is starting to show the rest of this iceberg. The review comprises the current state-of-the-art of the vast literature in concepts and methods already known for isolation and characterization of graphene, and rationalizes the quite disperse literature in other 2D materials such as metal oxides, hydroxides and chalcogenides, and metal–organic frameworks.