Author
Marcus Freitag
Other affiliations: University of Pennsylvania, Brookhaven National Laboratory, Purdue University ...read more
Bio: Marcus Freitag is an academic researcher from IBM. The author has contributed to research in topics: Graphene & Carbon nanotube. The author has an hindex of 45, co-authored 100 publications receiving 11901 citations. Previous affiliations of Marcus Freitag include University of Pennsylvania & Brookhaven National Laboratory.
Topics: Graphene, Carbon nanotube, Nanotube, Graphene nanoribbons, Photocurrent
Papers published on a yearly basis
Papers
More filters
IBM1
TL;DR: Transparent photonic devices based on graphene/insulator stacks, which are formed by depositing alternating wafer-scale graphene sheets and thin insulating layers, then patterning them together into photonic-crystal-like structures are demonstrated, showing experimentally that the plasmon in such stacks is unambiguously non-classical.
Abstract: The collective oscillation of carriers--the plasmon--in graphene has many desirable properties, including tunability and low loss. However, in single-layer graphene, the dependence on carrier concentration of both the plasmonic resonance frequency and magnitude is relatively weak, limiting its applications in photonics. Here, we demonstrate transparent photonic devices based on graphene/insulator stacks, which are formed by depositing alternating wafer-scale graphene sheets and thin insulating layers, then patterning them together into photonic-crystal-like structures. We show experimentally that the plasmon in such stacks is unambiguously non-classical. Compared with doping in single-layer graphene, distributing carriers into multiple graphene layers effectively enhances the plasmonic resonance frequency and magnitude, which is different from the effect in a conventional semiconductor superlattice and is a direct consequence of the unique carrier density scaling law of the plasmonic resonance of Dirac fermions. Using patterned graphene/insulator stacks, we demonstrate widely tunable far-infrared notch filters with 8.2 dB rejection ratios and terahertz linear polarizers with 9.5 dB extinction ratios. An unpatterned stack consisting of five graphene layers shields 97.5% of electromagnetic radiation at frequencies below 1.2 THz. This work could lead to the development of transparent mid- and far-infrared photonic devices such as detectors, modulators and three-dimensional metamaterial systems.
1,155 citations
IBM1
TL;DR: In this article, the fundamental optical behavior of carbon nanotubes as well as their opportunities for light generation and detection, and photovoltaic energy generation are described. But the authors do not discuss the potential of using these materials for light and energy generation.
Abstract: Carbon nanotubes possess unique properties that make them potentially useful in many applications in optoelectronics. This review describes the fundamental optical behaviour of carbon nanotubes as well as their opportunities for light generation and detection, and photovoltaic energy generation.
1,084 citations
TL;DR: In this paper, the authors clarified damping pathways for mid-infrared graphene plasmons, including graphene intrinsic optical phonons and edge scattering, and demonstrated the guiding of a 50-nm-wide structure with an electromagnetic mode area of 10−3 μm2 and a propagation length of 200 nm.
Abstract: Researchers clarify damping pathways for mid-infrared graphene plasmons, including graphene intrinsic optical phonons and edge scattering. They also demonstrate the guiding of mid-infrared graphene plasmons in 50-nm-wide structures with an electromagnetic mode area of 10−3 μm2 and a propagation length of 200 nm.
846 citations
IBM1
TL;DR: In this article, a single carbon nanotube incorporated as the channel of an ambipolar field-effect transistor (FET) was observed to have an estimated quantum efficiency of >10%.
Abstract: We observe infrared laser excited photoconductivity from a single carbon nanotube incorporated as the channel of an ambipolar field-effect transistor (FET). Electron−hole pairs are generated within the nanotube molecule, and the carriers are separated by an applied electric field between the source and drain contacts. The photocurrent shows resonances whose energies are in agreement with the energies of exciton states of semiconducting nanotubes of the appropriate diameter. The photocurrent is maximized for photons polarized along the direction of the carbon nanotube. Thus, the nanotube FET acts as a polarized photodetector with a diameter 1000 times smaller than the wavelength of the light it detects and has an estimated quantum efficiency of >10%. A photovoltage is observed when an asymmetric band lineup due to two nonequivalent Schottky barriers or an asymmetric coupling of the gate to the nanotube is present.
633 citations
TL;DR: It is shown that at a certain gate bias, the impact of the metal on the channel potential profile extends into the channel for more than one-third of the total channel length from both source and drain sides; hence, most of the channel is affected by the metal.
Abstract: We measure the channel potential of a graphene transistor using a scanning photocurrent imaging technique. We show that at a certain gate bias, the impact of the metal on the channel potential profile extends into the channel for more than one-third of the total channel length from both source and drain sides; hence, most of the channel is affected by the metal. The potential barrier between the metal-controlled graphene and bulk graphene channel is also measured at various gate biases. As the gate bias exceeds the Dirac point voltage, VDirac, the original p-type graphene channel turns into a p-n-p channel. When light is focused on the p-n junctions, an impressive external responsivity of 0.001 A/W is achieved, given that only a single layer of atoms are involved in photon detection.
597 citations
Cited by
More filters
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.
13,348 citations
TL;DR: This work reviews recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.
7,987 citations
TL;DR: Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability as discussed by the authors, and its true potential lies in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultrawideband tunability.
Abstract: The richness of optical and electronic properties of graphene attracts enormous interest. Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability. So far, the main focus has been on fundamental physics and electronic devices. However, we believe its true potential lies in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultrawideband tunability. The rise of graphene in photonics and optoelectronics is shown by several recent results, ranging from solar cells and light-emitting devices to touch screens, photodetectors and ultrafast lasers. Here we review the state-of-the-art in this emerging field.
6,863 citations
TL;DR: This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
Abstract: We have converted nanoscale mechanical energy into electrical energy by means of piezoelectric zinc oxide nanowire (NW) arrays. The aligned NWs are deflected with a conductive atomic force microscope tip in contact mode. The coupling of piezoelectric and semiconducting properties in zinc oxide creates a strain field and charge separation across the NW as a result of its bending. The rectifying characteristic of the Schottky barrier formed between the metal tip and the NW leads to electrical current generation. The efficiency of the NW-based piezoelectric power generator is estimated to be 17 to 30%. This approach has the potential of converting mechanical, vibrational, and/or hydraulic energy into electricity for powering nanodevices.
6,692 citations
TL;DR: The state of the art, future directions and open questions in Raman spectroscopy of graphene are reviewed, and essential physical processes whose importance has only recently been recognized are described.
Abstract: Raman spectroscopy is an integral part of graphene research. It is used to determine the number and orientation of layers, the quality and types of edge, and the effects of perturbations, such as electric and magnetic fields, strain, doping, disorder and functional groups. This, in turn, provides insight into all sp(2)-bonded carbon allotropes, because graphene is their fundamental building block. Here we review the state of the art, future directions and open questions in Raman spectroscopy of graphene. We describe essential physical processes whose importance has only recently been recognized, such as the various types of resonance at play, and the role of quantum interference. We update all basic concepts and notations, and propose a terminology that is able to describe any result in literature. We finally highlight the potential of Raman spectroscopy for layered materials other than graphene.
5,673 citations