scispace - formally typeset
Search or ask a question
Author

Marian Werner

Bio: Marian Werner is an academic researcher from German Aerospace Center. The author has contributed to research in topics: Synthetic aperture radar & Digital elevation model. The author has an hindex of 16, co-authored 39 publications receiving 6736 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: The Shuttle Radar Topography Mission produced the most complete, highest-resolution digital elevation model of the Earth, using dual radar antennas to acquire interferometric radar data, processed to digital topographic data at 1 arc sec resolution.
Abstract: [1] The Shuttle Radar Topography Mission produced the most complete, highest-resolution digital elevation model of the Earth. The project was a joint endeavor of NASA, the National Geospatial-Intelligence Agency, and the German and Italian Space Agencies and flew in February 2000. It used dual radar antennas to acquire interferometric radar data, processed to digital topographic data at 1 arc sec resolution. Details of the development, flight operations, data processing, and products are provided for users of this revolutionary data set.

5,019 citations

Journal ArticleDOI
TL;DR: A detailed overview of the TanDEM-X mission concept is given which is based on the systematic combination of several innovative technologies, including a novel satellite formation flying concept allowing for the collection of bistatic data with short along-track baselines, as well as the use of new interferometric modes for system verification and DEM calibration.
Abstract: TanDEM-X (TerraSAR-X add-on for digital elevation measurements) is an innovative spaceborne radar interferometer that is based on two TerraSAR-X radar satellites flying in close formation. The primary objective of the TanDEM-X mission is the generation of a consistent global digital elevation model (DEM) with an unprecedented accuracy, which is equaling or surpassing the HRTI-3 specification. Beyond that, TanDEM-X provides a highly reconfigurable platform for the demonstration of new radar imaging techniques and applications. This paper gives a detailed overview of the TanDEM-X mission concept which is based on the systematic combination of several innovative technologies. The key elements are the bistatic data acquisition employing an innovative phase synchronization link, a novel satellite formation flying concept allowing for the collection of bistatic data with short along-track baselines, as well as the use of new interferometric modes for system verification and DEM calibration. The interferometric performance is analyzed in detail, taking into account the peculiarities of the bistatic operation. Based on this analysis, an optimized DEM data acquisition plan is derived which employs the combination of multiple data takes with different baselines. Finally, a collection of instructive examples illustrates the capabilities of TanDEM-X for the development and demonstration of new remote sensing applications.

1,235 citations

Proceedings ArticleDOI
27 Dec 2004
TL;DR: The mission concept and requirements, including several innovative aspects like operation modes, orbit selection and maintenance as well as PRF and phase synchronization, and results from a detailed performance estimation show the achievable DEM accuracy.
Abstract: TanDEM-X is a mission proposal for a TerraSAR-X add-on satellite for high-resolution single-pass SAR interferometry. This mission proposal has been selected for a Phase A study within the scope of a Call for Proposals for a next German Earth Observation Mission to be launched in 2008/2009. The mission has the goal of generating a global Digital Elevation Model (DEM) with an accuracy corresponding to the DTED-3 specifications (12 m posting, 2 m relative height accuracy for flat terrain). This goal will be achieved by means of a second, TerraSAR-X like satellite (TanDEM-X) flying in a close orbit configuration with TerraSAR-X. This paper describes the mission concept and requirements, including several innovative aspects like operation modes, orbit selection and maintenance as well as PRF and phase synchronization. Results from a detailed performance estimation show the achievable DEM accuracy. Finally, an overview of the potential of the TanDEM-X mission for several scientific applications is presented.

198 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors created a new dataset of spatially interpolated monthly climate data for global land areas at a very high spatial resolution (approximately 1 km2), including monthly temperature (minimum, maximum and average), precipitation, solar radiation, vapour pressure and wind speed, aggregated across a target temporal range of 1970-2000, using data from between 9000 and 60,000 weather stations.
Abstract: We created a new dataset of spatially interpolated monthly climate data for global land areas at a very high spatial resolution (approximately 1 km2). We included monthly temperature (minimum, maximum and average), precipitation, solar radiation, vapour pressure and wind speed, aggregated across a target temporal range of 1970–2000, using data from between 9000 and 60 000 weather stations. Weather station data were interpolated using thin-plate splines with covariates including elevation, distance to the coast and three satellite-derived covariates: maximum and minimum land surface temperature as well as cloud cover, obtained with the MODIS satellite platform. Interpolation was done for 23 regions of varying size depending on station density. Satellite data improved prediction accuracy for temperature variables 5–15% (0.07–0.17 °C), particularly for areas with a low station density, although prediction error remained high in such regions for all climate variables. Contributions of satellite covariates were mostly negligible for the other variables, although their importance varied by region. In contrast to the common approach to use a single model formulation for the entire world, we constructed the final product by selecting the best performing model for each region and variable. Global cross-validation correlations were ≥ 0.99 for temperature and humidity, 0.86 for precipitation and 0.76 for wind speed. The fact that most of our climate surface estimates were only marginally improved by use of satellite covariates highlights the importance having a dense, high-quality network of climate station data.

7,558 citations

Journal ArticleDOI
TL;DR: An overview of the GMES Sentinel-2 mission including a technical system concept overview, image quality, Level 1 data processing and operational applications is provided.

2,517 citations

Journal ArticleDOI
TL;DR: This work analyzed a global database of directly harvested trees at 58 sites, spanning a wide range of climatic conditions and vegetation types, and found a pantropical model incorporating wood density, trunk diameter, and the variable E outperformed previously published models without height.
Abstract: Terrestrial carbon stock mapping is important for the successful implementation of climate change mitigation policies. Its accuracy depends on the availability of reliable allometric models to infer oven-dry aboveground biomass of trees from census data. The degree of uncertainty associated with previously published pantropical aboveground biomass allometries is large. We analyzed a global database of directly harvested trees at 58 sites, spanning a wide range of climatic conditions and vegetation types (4004 trees ≥ 5 cm trunk diameter). When trunk diameter, total tree height, and wood specific gravity were included in the aboveground biomass model as covariates, a single model was found to hold across tropical vegetation types, with no detectable effect of region or environmental factors. The mean percent bias and variance of this model was only slightly higher than that of locally fitted models. Wood specific gravity was an important predictor of aboveground biomass, especially when including a much broader range of vegetation types than previous studies. The generic tree diameter-height relationship depended linearly on a bioclimatic stress variable E, which compounds indices of temperature variability, precipitation variability, and drought intensity. For cases in which total tree height is unavailable for aboveground biomass estimation, a pantropical model incorporating wood density, trunk diameter, and the variable E outperformed previously published models without height. However, to minimize bias, the development of locally derived diameter-height relationships is advised whenever possible. Both new allometric models should contribute to improve the accuracy of biomass assessment protocols in tropical vegetation types, and to advancing our understanding of architectural and evolutionary constraints on woody plant development.

1,750 citations

Journal ArticleDOI
TL;DR: For 11 days in February 2000, the Shuttle Radar Topography Mission (SRTM) successfully recorded by interferometric synthetic aperture radar (InSAR) data of the entire land mass of the earth between 60°N and 57°S.
Abstract: For 11 days in February 2000, the Shuttle Radar Topography Mission (SRTM) successfully recorded by interferometric synthetic aperture radar (InSAR) data of the entire land mass of the earth between 60°N and 57°S. The data acquired in C- and X-bands are processed into the first global digital elevation models (DEMs) at 1 arc sec resolution, by NASA-JPL and German aerospace center (DLR), respectively. From the perspective of the SRTM-X system, we give in this paper an overview of the mission and the DEM production, as well as an evaluation of the DEM product quality. Special emphasis is on challenges and peculiarities of the processing that arose from the unique design of the SRTM system, which has been the first single-pass interferometer in space.

1,686 citations

Journal ArticleDOI
TL;DR: This paper provides first a tutorial about the SAR principles and theory, followed by an overview of established techniques like polarimetry, interferometry and differential interferometric as well as of emerging techniques (e.g., polarimetric SARinterferometry, tomography and holographic tomography).
Abstract: Synthetic Aperture Radar (SAR) has been widely used for Earth remote sensing for more than 30 years. It provides high-resolution, day-and-night and weather-independent images for a multitude of applications ranging from geoscience and climate change research, environmental and Earth system monitoring, 2-D and 3-D mapping, change detection, 4-D mapping (space and time), security-related applications up to planetary exploration. With the advances in radar technology and geo/bio-physical parameter inversion modeling in the 90s, using data from several airborne and spaceborne systems, a paradigm shift occurred from the development driven by the technology push to the user demand pull. Today, more than 15 spaceborne SAR systems are being operated for innumerous applications. This paper provides first a tutorial about the SAR principles and theory, followed by an overview of established techniques like polarimetry, interferometry and differential interferometry as well as of emerging techniques (e.g., polarimetric SAR interferometry, tomography and holographic tomography). Several application examples including the associated parameter inversion modeling are provided for each case. The paper also describes innovative technologies and concepts like digital beamforming, Multiple-Input Multiple-Output (MIMO) and bi- and multi-static configurations which are suitable means to fulfill the increasing user requirements. The paper concludes with a vision for SAR remote sensing.

1,614 citations