Mario Liu

Bio: Mario Liu is an academic researcher from University of Tübingen. The author has contributed to research in topics: Second sound & Cauchy stress tensor. The author has an hindex of 29, co-authored 122 publications receiving 2457 citations. Previous affiliations of Mario Liu include University of Hamburg & Bell Labs.

Electromagnetic Force and the Maxwell Stress Tensor in Condensed Systems

Abstract: While the electromagnetic force is microscopically simply the Lorentz force, its macroscopic form is more complicated, and given by expressions such as the Maxwell stress tensor and the Kelvin force. Their derivation is fairly opaque, at times even confusing, and their range of validity all but a well kept secret. These circumstances unnecessarily reduce the usefulness and trustworthiness of some key quantities in macroscopic electrodynamics. This article presents a thorough yet pedagogical derivation of the Maxwell stress tensor and electromagnetic force in condensed media. It starts from universally accepted inputs: conservation laws, thermodynamics and the Maxwell equations. Simplifications are considered for various limits, especially the equilibrium, with a range of validity assigned to each expression. Some widespread misconceptions are scrutinized, and hidden ambiguities in popular notations revealed. A number of phenomena typical of strongly polarizable systems, especially ferrofluid, are then considered. In addition to enhancing the appreciation of these systems, it helps to solidify the grasp of the introduced concepts and derived formulas, and it demonstrates the ease with which the Maxwell stress tensor can be handled, inviting theorists and experimentalists alike to embrace this useful quantity.

Boundary condition for fluid flow: Curved or rough surfaces.

Abstract: The curvature of the boundary is shown to alter the fluid's slip length, which may even become negative as a result. Due to the mesoscopic curvature of surface roughness, the microscopically calculated and the macroscopically measured slip lengths can be quite different.

Structure of Ferrofluid Dynamics

Abstract: The complete magnetodissipative structure of ferrofluid dynamics is derived from general principles, without reference to the angular momentum of the ferromagnetic grains. The results are independent of most microscopic details, and easily interpret two previous experiments. Both the Debye theory and the effective-field theory by Shliomis are shown to be special cases of the new set of equations.

Granular solid hydrodynamics

Abstract: A complete continuum mechanical theory for granular media, including explicit expressions for the energy current and the entropy production, is derived and explained. Its underlying notion is: granular media are elastic when at rest, but turn transiently elastic when the grains are agitated—such as by tapping or shearing. The theory includes the true temperature as a variable, and employs in addition a granular temperature to quantify the extent of agitation. A free energy expression is provided that contains the full jamming phase diagram, in the space spanned by pressure, shear stress, density and granular temperature. We refer to the theory as GSH, for granular solid hydrodynamics. In the static limit, it reduces to granular elasticity, shown previously to yield realistic static stress distributions. For steady-state deformations, it is equivalent to hypoplasticity, a state-of-the-art engineering model.

Granular Solid Hydrodynamics

Abstract: Granular elasticity, an elasticity theory useful for calculating static stress distribution in granular media, is generalized to the dynamic case by including the plastic contribution of the strain. A complete hydrodynamic theory is derived based on the hypothesis that granular medium turns transiently elastic when deformed. This theory includes both the true and the granular temperatures, and employs a free energy expression that encapsulates a full jamming phase diagram, in the space spanned by pressure, shear stress, density and granular temperature. For the special case of stationary granular temperatures, the derived hydrodynamic theory reduces to {\em hypoplasticity}, a state-of-the-art engineering model.

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Proceedings of the National Academy of Sciences

Abstract: where A represents the magnetic vector potential, is an integral of the hydromagnetic equations. This -integral made it possible to formulate a variational principle for the force-free magnetic fields. The integral expresses the fact that motions cannot transform a given field in an entirely arbitrary different field, if the conductivity of the medium isconsidered infinite. In this paper we shall show that the full set of hydromagnetic equations admit five more integrals, besides the energy integral, if dissipative processes are absent. These integrals, as we shall presently verify, are I2 =fbHvdV, (2)

Physics of liquid jets

Abstract: Jets, ie collimated streams of matter, occur from the microscale up to the large-scale structure of the universe Our focus will be mostly on surface tension effects, which result from the cohesive properties of liquids Paradoxically, cohesive forces promote the breakup of jets, widely encountered in nature, technology and basic science, for example in nuclear fission, DNA sampling, medical diagnostics, sprays, agricultural irrigation and jet engine technology Liquid jets thus serve as a paradigm for free-surface motion, hydrodynamic instability and singularity formation leading to drop breakup In addition to their practical usefulness, jets are an ideal probe for liquid properties, such as surface tension, viscosity or non-Newtonian rheology They also arise from the last but one topology change of liquid masses bursting into sprays Jet dynamics are sensitive to the turbulent or thermal excitation of the fluid, as well as to the surrounding gas or fluid medium The aim of this review is to provide a unified description of the fundamental and the technological aspects of these subjects

Boundary slip in Newtonian liquids: a review of experimental studies

Abstract: For several centuries fluid dynamics studies have relied upon the assumption that when a liquid flows over a solid surface, the liquid molecules adjacent to the solid are stationary relative to the solid. This no-slip boundary condition (BC) has been applied successfully to model many macroscopic experiments, but has no microscopic justification. In recent years there has been an increased interest in determining the appropriate BCs for the flow of Newtonian liquids in confined geometries, partly due to exciting developments in the fields of microfluidic and microelectromechanical devices and partly because new and more sophisticated measurement techniques are now available. An increasing number of research groups now dedicate great attention to the study of the flow of liquids at solid interfaces, and as a result a large number of experimental, computational and theoretical studies have appeared in the literature. We provide here a review of experimental studies regarding the phenomenon of slip of Newtonian liquids at solid interfaces. We dedicate particular attention to the effects that factors such as surface roughness, wettability and the presence of gaseous layers might have on the measured interfacial slip. We also discuss how future studies might improve our understanding of hydrodynamic BCs and enable us to actively control liquid slip.

Fast liquid-crystal elastomer swims into the dark

Abstract: Liquid-crystal elastomers (LCEs) are rubbers whose constituent molecules are orientationally ordered. Their salient feature is strong coupling between the orientational order and mechanical strain. For example, changing the orientational order gives rise to internal stresses, which lead to strains and change the shape of a sample. Orientational order can be affected by changes in externally applied stimuli such as light. We demonstrate here that by dissolving-rather than covalently bonding-azo dyes into an LCE sample, its mechanical deformation in response to non-uniform illumination by visible light becomes very large (more than 60 degrees bending) and is more than two orders of magnitude faster than previously reported. Rapid light-induced deformations allow LCEs to interact with their environment in new and unexpected ways. When light from above is shone on a dye-doped LCE sample floating on water, the LCE 'swims' away from the light, with an action resembling that of flatfish such as skates or rays. We analyse the propulsion mechanism in terms of momentum transfer.