scispace - formally typeset
Search or ask a question
Author

Marion Paterson-Beedle

Bio: Marion Paterson-Beedle is an academic researcher from University of Birmingham. The author has contributed to research in topics: Waste treatment & Proton exchange membrane fuel cell. The author has an hindex of 16, co-authored 27 publications receiving 820 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the potential contribution to the hydrogen economy of partially light-driven dual systems is overviewed alongside that of other bio-fuels such as bio-methane and bio-ethanol.
Abstract: Biological methods of hydrogen production are preferable to chemical methods because of the possibility to use sunlight, CO2 and organic wastes as substrates for environmentally benign conversions, under moderate conditions. By combining different microorganisms with different capabilities, the individual strengths of each may be exploited and their weaknesses overcome. Mechanisms of bio-hydrogen production are described and strategies for their integration are discussed. Dual systems can be divided broadly into wholly light-driven systems (with microalgae/cyanobacteria as the 1st stage) and partially light-driven systems (with a dark, fermentative initial reaction). Review and evaluation of published data suggests that the latter type of system holds greater promise for industrial application. This is because the calculated land area required for a wholly light-driven dual system would be too large for either centralised (macro-) or decentralised (micro-) energy generation. The potential contribution to the hydrogen economy of partially light-driven dual systems is overviewed alongside that of other bio-fuels such as bio-methane and bio-ethanol.

139 citations

Journal ArticleDOI
TL;DR: Electron microscopy suggested that the differences in biofilm formation may relate to differential expression of fimbriae on the cell surface in relation to medium composition.
Abstract: A phosphatase-overproducing Citrobacter sp. (NCIMB 40259) was grown in an air-lift reactor in steady-state continuous culture under limitation of carbon, phosphorus or nitrogen. Substantial biofilm formation, and the highest phosphatase activity, were observed under lactose limitation. However, the total amount of biofilm wet biomass and the phosphatase specific activity were reduced in phosphorus- or nitrogen-limited cultures or when glucose was substituted for lactose as the limiting carbon source. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and confocal laser scanning microscopy (CLSM) showed differences in cell and biofilm morphology in relation to medium composition. Electron microscopy suggested that the differences in biofilm formation may relate to differential expression of fimbriae on the cell surface.

87 citations

Journal ArticleDOI
TL;DR: The concept of functional bionanomaterials as discussed by the authors has been proposed to convert wastes into new materials under biocontrol, which can be referred to as functional biohydrometallurgy.

74 citations

Journal ArticleDOI
TL;DR: Varying the Bio-HAp manufacturing method was found to influence hydroxyapatite (HAp) properties and consequently the uptake of Sr(2+) and Co(2+), which shows promise for the remediation of aqueous metal waste.
Abstract: Biomineral hydroxyapatite (Bio-HAp) produced by Serratia sp. has the potential to be a suitable material for the remediation of metal contaminated waters and as a radionuclide waste storage material. Varying the Bio-HAp manufacturing method was found to influence hydroxyapatite (HAp) properties and consequently the uptake of Sr(2+) and Co(2+). All the Bio-HAp tested in this study were more efficient than the commercially available hydroxyapatite (Com-HAp) for Sr(2+) and Co(2+) uptake. For Bio-HAp the uptake for Sr(2+) and Co(2+) ranged from 24 to 39 and 29 to 78 mmol per 100 g, respectively. Whereas, the uptake of Sr(2+) and Co(2+) by Com-HAp ranged from 3 to 11 and 4 to 18 mmol per 100 g, respectively. Properties that increased metal uptake were smaller crystallite size ( 70 m(2) g(-1)). Organic content which influences the structure (e.g., crystallite arrangement, size and surface area) and composition of Bio-HAp was also found to be important in Sr(2+) and Co(2+) uptake. Overall, Bio-HAp shows promise for the remediation of aqueous metal waste especially since Bio-HAp can be synthesized for optimal metal uptake properties.

69 citations

Journal ArticleDOI
TL;DR: Biosynthesis of nano-scale platinum and palladium was achieved via enzymatically-mediated deposition of metal ions from solution, paving the way for economical production of fuel cell catalysts since previous studies have shown that precious metals can be biorecovered from wastes into catalytically active bionanomaterials.
Abstract: Biosynthesis of nano-scale platinum and palladium was achieved via enzymatically-mediated deposition of metal ions from solution. The bio-accumulated Pt(0) and Pd(0) crystals were dried, applied onto carbon paper and tested as anodes in a polymer electrolyte membrane (PEM) fuel cell for power production. Up to 100% and 81% of the maximum power generation was achieved by the bio-Pt and bio-Pd catalysts, respectively, compared to commercial fuel cell grade Pt catalyst. Hence, biomineralisation could pave the way for economical production of fuel cell catalysts since previous studies have shown that precious metals can be biorecovered from wastes into catalytically active bionanomaterials.

57 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The ubiquity and importance of microbes in biosphere processes make geomicrobiology one of the most important concepts within microbiology, and one requiring an interdisciplinary approach to define environmental and applied significance and underpin exploitation in biotechnology.
Abstract: Microbes play key geoactive roles in the biosphere, particularly in the areas of element biotransformations and biogeochemical cycling, metal and mineral transformations, decomposition, bioweathering, and soil and sediment formation. All kinds of microbes, including prokaryotes and eukaryotes and their symbiotic associations with each other and 'higher organisms', can contribute actively to geological phenomena, and central to many such geomicrobial processes are transformations of metals and minerals. Microbes have a variety of properties that can effect changes in metal speciation, toxicity and mobility, as well as mineral formation or mineral dissolution or deterioration. Such mechanisms are important components of natural biogeochemical cycles for metals as well as associated elements in biomass, soil, rocks and minerals, e.g. sulfur and phosphorus, and metalloids, actinides and metal radionuclides. Apart from being important in natural biosphere processes, metal and mineral transformations can have beneficial or detrimental consequences in a human context. Bioremediation is the application of biological systems to the clean-up of organic and inorganic pollution, with bacteria and fungi being the most important organisms for reclamation, immobilization or detoxification of metallic and radionuclide pollutants. Some biominerals or metallic elements deposited by microbes have catalytic and other properties in nanoparticle, crystalline or colloidal forms, and these are relevant to the development of novel biomaterials for technological and antimicrobial purposes. On the negative side, metal and mineral transformations by microbes may result in spoilage and destruction of natural and synthetic materials, rock and mineral-based building materials (e.g. concrete), acid mine drainage and associated metal pollution, biocorrosion of metals, alloys and related substances, and adverse effects on radionuclide speciation, mobility and containment, all with immense social and economic consequences. The ubiquity and importance of microbes in biosphere processes make geomicrobiology one of the most important concepts within microbiology, and one requiring an interdisciplinary approach to define environmental and applied significance and underpin exploitation in biotechnology.

1,550 citations

Journal ArticleDOI
06 Nov 2019-Nature
TL;DR: The current range of approaches to electric-vehicle lithium-ion battery recycling and re-use are outlined, areas for future progress are highlighted, and processes for dismantling and recycling lithium-ions from scrap electric vehicles are outlined.
Abstract: Rapid growth in the market for electric vehicles is imperative, to meet global targets for reducing greenhouse gas emissions, to improve air quality in urban centres and to meet the needs of consumers, with whom electric vehicles are increasingly popular. However, growing numbers of electric vehicles present a serious waste-management challenge for recyclers at end-of-life. Nevertheless, spent batteries may also present an opportunity as manufacturers require access to strategic elements and critical materials for key components in electric-vehicle manufacture: recycled lithium-ion batteries from electric vehicles could provide a valuable secondary source of materials. Here we outline and evaluate the current range of approaches to electric-vehicle lithium-ion battery recycling and re-use, and highlight areas for future progress. Processes for dismantling and recycling lithium-ion battery packs from scrap electric vehicles are outlined.

1,333 citations

Journal ArticleDOI
TL;DR: Preliminary studies show the potential of nanomaterials in improving seed germination and growth, plant protection, pathogen detection, and pesticide/herbicide residue detection.

944 citations

Journal ArticleDOI
TL;DR: In this article, a review of the potential of dark fermentation of organic biomasses and its potential in green energy-efficient green chemistry applications is presented, with a brief review on the simulation and modeling of the dark fermentation processes and their energy balance.

711 citations

Journal ArticleDOI
TL;DR: EDTA-GO was found to be an ideal adsorbent for Pb(II) removal with a higher adsorption capacity and the experimental results suggest that EDTA- GO can be reused after washed with HCl, suggesting potential applications in the environmental cleanup.
Abstract: Chelating groups are successfully linked to graphene oxide (GO) surfaces through a silanization reaction between N-(trimethoxysilylpropyl) ethylenediamine triacetic acid (EDTA-silane) and hydroxyl groups on GO surface. EDTA-GO was found to be an ideal adsorbent for Pb(II) removal with a higher adsorption capacity. EDTA-modification enhances the adsorption capacity of GO because of the chelating ability of ethylene diamine triacetic acid. This study investigates the adsorption and desorption behaviors of heavy metal cations and the effects of solution conditions such as pH on Pb(II) removal. The adsorption capacity for Pb(II) removal was found to be 479 ± 46) mg/g at pH 6.8, and the adsorption process was completed within 20 min. The Langmuir adsorption model agrees well with the experimental data. The experimental results suggest that EDTA-GO can be reused after washed with HCl, suggesting potential applications in the environmental cleanup.

684 citations