Texture of B-mode echograms: 3-D simulations and experiments of the effects of diffraction and scatterer density.

Ultrasonic speckle formation, analysis and processing applied to tissue characterization

Measurement of ultrasonic attenuation and velocity in cancellous bone are being applied to aid diagnosis of women with high fracture risk due to osteoporosis. However, velocity dispersion in cancellous bone has received little attention up to now. The overall goal of this research was to characterize the velocity dispersion of human cancellous bone based on a spectral analysis of ultrasound transmitted through the bone specimens. We have followed a systematic approach, beginning with the investigation of a test material, moving on to the investigation of bone specimens. Particular attention is given to diffraction effect, a potential source of artifacts. Parametric images of phase velocity (measured at the center frequency of the pulse spectrum), slope of attenuation coefficient (dB/cm/MHz) and velocity dispersion were obtained by scanning 15 bone specimens. We have demonstrated that the diffraction effect is negligible in the useful frequency bandwidth, and that the ultrasonic parameters reflect intrinsic acoustic properties of bone tissue. The measured attenuation showed approximately linear behavior over the frequency range 200 to 600 kHz. Velocity dispersion of cancellous bone in the frequency range 200 to 600 kHz was unexpectedly found to be either negative or positive and not correlated with the slope of attenuation coefficient. There was a highly significant correlation between the slope of attenuation coefficient and phase velocity at the center frequency of the spectrum. This behavior contrasts with other biological or nonbiological materials where the local form of the Kramers-Kronig relationship provides accurate prediction of velocity dispersion from the experimental frequency dependent-attenuation for unbounded waves.

Velocity dispersion of acoustic waves in cancellous bone

A study was performed to find and test quantitative methods of analysing echographic signals for the differentiation of diffuse liver diseases. An on-line data acquisition system was used to acquire radiofrequency (RF) echo signals from volunteers and patients. Several methods to estimate the frequency-dependent attenuation coefficient were evaluated, in which a correction for the frequency and depth-dependent diffraction and focusing effects caused by the sound beam was applied. Using the estimated value of the attenuation coefficient the RF signals themselves were corrected to remove the depth dependencies caused by the sound beam and by the frequency-dependent attenuation. After this preprocessing the envelope of the corrected RF signals was calculated and B-mode images were reconstructed. The texture was analysed in the axial direction by first- and second-order statistical methods. The accuracy and precision of the attenuation methods were assessed by using computer simulated RF signals and RF data obtained from a tissue-mimicking phantom. The phantom measurements were also used to test the performance of the methods to correct for the depth dependencies.

http://iopscience.iop.org/article/10.1088/0031-9155/36/8/002/pdf

Ultrasound attenuation and texture analysis of diffuse liver disease methods and preliminary results

Phantoms that mimic mechanical and acoustic properties of soft biological tissues are essential to elasticity imaging investigation and to elastography device characterization. Several materials including agar/gelatin, polyvinyl alcohol and polyacrylamide gels have been used successfully in the past to produce tissue phantoms, as reported in the literature. However, it is difficult to find a phantom material with a wide range of stiffness, good stability over time and high resistance to rupture. We aim at developing and testing a new copolymer-in-oil phantom material for elastography. The phantom is composed of a mixture of copolymer, mineral oil and additives for acoustic scattering. The mechanical properties of phantoms were evaluated with a mechanical test instrument and an ultrasound-based elastography technique. The acoustic properties were investigated using a through-transmission water-substituting method. We showed that copolymer-in-oil phantoms are stable over time. Their mechanical and acoustic properties mimic those of most soft tissues: the Young's modulus ranges from 2.2-150 kPa, the attenuation coefficient from 0.4-4.0 dB.cm(-1) and the ultrasound speed from 1420-1464 m/s. Their density is equal to 0.90 +/- 0.04 g/cm3. The results suggest that copolymer-in-oil phantoms are attractive materials for elastography.

Copolymer-in-oil phantom materials for elastography

In this paper, the various methods of estimating the attenuation and velocity of ultrasound in biological media are described. Special attention is paid to the influence of the transducer used in the measurement, i.e., the diffraction effect. This influence is investigated in a systematic way using realistic three-dimensional computer simulation techniques. The results of the analysis are given as universal sets of curves. These curves can be used by the interested reader to estimate the influence of the diffraction effect on the measurements for his own experimental conditions. Methods of preventing the systematic errors caused by the diffraction effect are discussed. For the sake of completeness, the effect of velocity dispersion on the measurement of velocity in tissues is discussed as well.

Marius J. T. M. Cloostermans

Papers

Diffraction and Dispersion Effects on the Estimation of Ultrasound Attenuation and Velocity in Biological Tissues