Mark R. Cutkosky

Bio: Mark R. Cutkosky is an academic researcher from Stanford University. The author has contributed to research in topics: Haptic technology & Tactile sensor. The author has an hindex of 77, co-authored 393 publications receiving 20600 citations. Previous affiliations of Mark R. Cutkosky include Immersion Corporation & Carnegie Mellon University.

On grasp choice, grasp models, and the design of hands for manufacturing tasks

Abstract: Current analytical models of grasping and manipulation with robotic hands contain simplifications and assumptions that limit their application to manufacturing environments. To evaluate these models, a study was undertaken of the grasps used by machinists in a small batch manufacturing operation. Based on the study, a taxonomy of grasps was constructed. An expert system was also developed to clarify the issues involved in human grasp choice. Comparisons of the grasp taxonomy, the expert system, and grasp-quality measures derived from the analytic models reveal that the analytic measures are useful for describing grasps in manufacturing tasks despite the limitations in the models. In addition, the grasp taxonomy provides insights for the design of versatile robotic hands for manufacturing. >

PACT: an experiment in integrating concurrent engineering systems

Abstract: The Palo Alto Collaborative Testbed (PACT), a concurrent engineering infrastructure that encompasses multiple sites, subsystems, and disciplines, is discussed. The PACT systems include NVisage, a distributed knowledge-based integration environment for design tools; DME (Device Modeling Environment), a model formulation and simulation environment; Next-Cut, a mechanical design and process planning system; and Designworld, a digital electronics design, simulation, assembly, and testing system. The motivations for PACT and the significance of the approach for concurrent engineering is discussed. Initial experiments in distributed simulation and incremental redesign are reviewed, and PACT's agent-based architecture and lessons learned from the PACT experiments are described. >

Frictional adhesion: A new angle on gecko attachment.

Abstract: Directional arrays of branched microscopic setae constitute a dry adhesive on the toes of pad-bearing geckos, nature's supreme climbers. Geckos are easily and rapidly able to detach their toes as they climb. There are two known mechanisms of detachment: (1) on the microscale, the seta detaches when the shaft reaches a critical angle with the substrate, and (2) on the macroscale, geckos hyperextend their toes, apparently peeling like tape. This raises the question of how geckos prevent detachment while inverted on the ceiling, where body weight should cause toes to peel and setal angles to increase. Geckos use opposing feet and toes while inverted, possibly to maintain shear forces that prevent detachment of setae or peeling of toes. If detachment occurs by macroscale peeling of toes, the peel angle should monotonically decrease with applied force. In contrast, if adhesive force is limited by microscale detachment of setae at a critical angle, the toe detachment angle should be independent of applied force. We tested the hypothesis that adhesion is increased by shear force in isolated setal arrays and live gecko toes. We also tested the corollary hypotheses that (1) adhesion in toes and arrays is limited as on the microscale by a critical angle, or (2) on the macroscale by adhesive strength as predicted for adhesive tapes. We found that adhesion depended directly on shear force, and was independent of detachment angle. Therefore we reject the hypothesis that gecko toes peel like tape. The linear relation between adhesion and shear force is consistent with a critical angle of release in live gecko toes and isolated setal arrays, and also with our prior observations of single setae. We introduced a new model, frictional adhesion, for gecko pad attachment and compared it to existing models of adhesive contacts. In an analysis of clinging stability of a gecko on an inclined plane each adhesive model predicted a different force control strategy. The frictional adhesion model provides an explanation for the very low detachment forces observed in climbing geckos that does not depend on toe peeling.

Smooth Vertical Surface Climbing With Directional Adhesion

Abstract: Stickybot is a bioinspired robot that climbs smooth vertical surfaces such as glass, plastic, and ceramic tile at 4 cm/s. The robot employs several design principles adapted from the gecko including a hierarchy of compliant structures, directional adhesion, and control of tangential contact forces to achieve control of adhesion. We describe the design and fabrication methods used to create underactuated, multimaterial structures that conform to surfaces over a range of length scales from centimeters to micrometers. At the finest scale, the undersides of Stickybot's toes are covered with arrays of small, angled polymer stalks. Like the directional adhesive structures used by geckos, they readily adhere when pulled tangentially from the tips of the toes toward the ankles; when pulled in the opposite direction, they release. Working in combination with the compliant structures and directional adhesion is a force control strategy that balances forces among the feet and promotes smooth attachment and detachment of the toes.

An overview of dexterous manipulation

Abstract: Presents an overview of research in dexterous manipulation. We first define robotic dexterous manipulation in comparison to traditional robotics and human manipulation. Next, kinematics, contact types and forces are used to formulate the dexterous manipulation problem. Dexterous motion planning is described, which includes grasp planning and quality measures. We look at mid- and low-level control frameworks, and then compare manipulation versus exploration. Finally, we list accomplishments in the different areas of dexterous manipulation research, and highlight important areas for future work.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Toward principles for the design of ontologies used for knowledge sharing

Abstract: Recent work in Artificial Intelligence is exploring the use of formal ontologies as a way of specifying content-specific agreements for the sharing and reuse of knowledge among software entities. We take an engineering perspective on the development of such ontologies. Formal ontologies are viewed as designed artifacts, formulated for specific purposes and evaluated against objective design criteria. We describe the role of ontologies in supporting knowledge sharing activities, and then present a set of criteria to guide the development of ontologies for these purposes. We show how these criteria are applied in case studies from the design of ontologies for engineering mathematics and bibliographic data. Selected design decisions are discussed, and alternative representation choices and evaluated against the design criteria.

Intelligent Agents: Theory and Practice

Abstract: The concept of an agent has become important in both Artificial Intelligence (AI) and mainstream computer science. Our aim in this paper is to point the reader at what we perceive to be the most important theoretical and practical issues associated with the design and construction of intelligent agents. For convenience, we divide these issues into three areas (though as the reader will see, the divisions are at times somewhat arbitrary). Agent theory is concerned with the question of what an agent is, and the use of mathematical formalisms for representing and reasoning about the properties of agents. Agent architectures can be thought of as software engineering models of agents;researchers in this area are primarily concerned with the problem of designing software or hardware systems that will satisfy the properties specified by agent theorists. Finally, agent languages are software systems for programming and experimenting with agents; these languages may embody principles proposed by theorists. The paper is not intended to serve as a tutorial introduction to all the issues mentioned; we hope instead simply to identify the most important issues, and point to work that elaborates on them. The article includes a short review of current and potential applications of agent technology.

A Mathematical Introduction to Robotic Manipulation

Abstract: INTRODUCTION: Brief History. Multifingered Hands and Dextrous Manipulation. Outline of the Book. Bibliography. RIGID BODY MOTION: Rigid Body Transformations. Rotational Motion in R3. Rigid Motion in R3. Velocity of a Rigid Body. Wrenches and Reciprocal Screws. MANIPULATOR KINEMATICS: Introduction. Forward Kinematics. Inverse Kinematics. The Manipulator Jacobian. Redundant and Parallel Manipulators. ROBOT DYNAMICS AND CONTROL: Introduction. Lagrange's Equations. Dynamics of Open-Chain Manipulators. Lyapunov Stability Theory. Position Control and Trajectory Tracking. Control of Constrained Manipulators. MULTIFINGERED HAND KINEMATICS: Introduction to Grasping. Grasp Statics. Force-Closure. Grasp Planning. Grasp Constraints. Rolling Contact Kinematics. HAND DYNAMICS AND CONTROL: Lagrange's Equations with Constraints. Robot Hand Dynamics. Redundant and Nonmanipulable Robot Systems. Kinematics and Statics of Tendon Actuation. Control of Robot Hands. NONHOLONOMIC BEHAVIOR IN ROBOTIC SYSTEMS: Introduction. Controllability and Frobenius' Theorem. Examples of Nonholonomic Systems. Structure of Nonholonomic Systems. NONHOLONOMIC MOTION PLANNING: Introduction. Steering Model Control Systems Using Sinusoids. General Methods for Steering. Dynamic Finger Repositioning. FUTURE PROSPECTS: Robots in Hazardous Environments. Medical Applications for Multifingered Hands. Robots on a Small Scale: Microrobotics. APPENDICES: Lie Groups and Robot Kinematics. A Mathematica Package for Screw Calculus. Bibliography. Index Each chapter also includes a Summary, Bibliography, and Exercises