Markus Koppe

Bio: Markus Koppe is an academic researcher from Johannes Kepler University of Linz. The author has contributed to research in topics: Polymer solar cell & Organic solar cell. The author has an hindex of 16, co-authored 22 publications receiving 6281 citations. Previous affiliations of Markus Koppe include University of California, Davis.

Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency

Abstract: There has been an intensive search for cost-effective photovoltaics since the development of the first solar cells in the 1950s. [1–3] Among all alternative technologies to silicon-based pn-junction solar cells, organic solar cells could lead the most significant cost reduction. [4] The field of organic photovoltaics (OPVs) comprises organic/inorganic nanostructures like dyesensitized solar cells, multilayers of small organic molecules, and phase-separated mixtures of organic materials (the bulkheterojunction solar cell). A review of several OPV technologies has been presented recently. [5] Light absorption in organic solar cells leads to the generation of excited, bound electron– hole pairs (often called excitons). To achieve substantial energy-conversion efficiencies, these excited electron–hole pairs need to be dissociated into free charge carriers with a high yield. Excitons can be dissociated at interfaces of materials with different electron affinities or by electric fields, or the dissociation can be trap or impurity assisted. Blending conjugated polymers with high-electron-affinity molecules like C60 (as in the bulk-heterojunction solar cell) has proven to be an efficient way for rapid exciton dissociation. Conjugated polymer–C60 interpenetrating networks exhibit ultrafast charge transfer (∼40 fs). [6,7] As there is no competing decay process of the optically excited electron–hole pair located on the polymer in this time regime, an optimized mixture with C60 converts absorbed photons to electrons with an efficiency close to 100%. [8] The associated bicontinuous interpenetrating network enables efficient collection of the separated charges at the electrodes. The bulk-heterojunction solar cell has attracted a lot of attention because of its potential to be a true low-cost photovoltaic technology. A simple coating or printing process would enable roll-to-roll manufacturing of flexible, low-weight PV modules, which should permit cost-efficient production and the development of products for new markets, e.g., in the field of portable electronics. One major obstacle for the commercialization of bulk-heterojunction solar cells is the relatively small device efficiencies that have been demonstrated up to now. [5] The best energy-conversion efficiencies published for small-area devices approach 5%. [9–11] A detailed analysis of state-of-the-art bulk-heterojunction solar cells [8] reveals that the efficiency is limited by the low opencircuit voltage (Voc) delivered by these devices under illumination. Typically, organic semiconductors with a bandgap of about 2 eV are applied as photoactive materials, but the observed open-circuit voltages are only in the range of 0.5–1 V. There has long been a controversy about the origin of the Voc in conjugated polymer–fullerene solar cells. Following the classical thin-film solar-cell concept, the metal–insulator–metal (MIM) model was applied to bulk-heterojunction devices. In the MIM picture, Voc is simply equal to the work-function difference of the two metal electrodes. The model had to be modified after the observation of the strong influence of the reduction potential of the fullerene on the open-circuit volt

Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell.

Abstract: Bulk heterojunction solar cells have attracted considerable attention over the past several years due to their potential for low-cost photovoltaic technology. The possibility of manufacturing modules via a standard printing/coating method in a roll-to-roll process in combination with the use of low-cost materials will lead to a watt-peak price of less than 1 US$ within the next few years. [1] Despite the low-cost potential, the power conversion efficiency of bulk heterojunction devices is low compared to inorganic solar cells. Efficiencies in the range of 5‐6% have been certified at NREL and AIST usually on devices with small active areas. [2] The current understanding of bulk heterojunction solar cells suggests that the maximum efficiency is in the range of 10‐12%. [3] Several reasons for the power conversion efficiency limitation have been identified. [1] Some of the prerequisites for achieving highest efficiencies are donor and acceptor materials with optimized energy levels [highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO)], efficient charge transport in the donor‐acceptor blend, efficient charge generation and limited recombination losses. Power conversion efficiency is strongly dependent on charge transport and charge generation, which are dominated by the phase behavior of the donor and acceptor molecules. The resulting, and often unfavorable, nanomorphology of this two-component blend limits the power conversion efficiency of bulk heterojunction solar cells. Precise control of the nanomorphology is very difficult and has been achieved only for a few systems. [4‐6] The relation between the chemical structure of donor and acceptor materials and the nanomorphology that they form when they are blended is currently not well understood, and as will be shown in this paper, minor changes in the chemical structure can cause major changes in the performance of the materials in organic solar cells. In this work we demonstrate the effect of replacing a carbon atom with a silicon atom on the main chain of the conjugated polymer. The approach has been used previously, and promising materials for field-effect transistors and organic solar cells have been demonstrated. [7‐9] We find that making this simple substitution in poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4b 0 ]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) yields a polysilole, e.g., poly[(4,4 0 -bis(2-ethylhexyl)dithieno[3,2b:2 0 ,3 0 -d]silole)-2,6-diyl-alt-(4,7-bis(2-thienyl)-2,1,3-benzothiadiazole)-5,5 0 -diyl] (Si-PCPDTBT), with a higher crystallinity, improved charge transport properties, reduced bimolecular recombination, and a reduced formation of charge transfer complexes when blended with a fullerene derivative. This silole-based polymer is found to form a highly functional nanomorphology when blended with [6,6]-phenyl C71-butyric acid methyl ester (C70-PCBM), and solar cells prepared using this blend gave efficiencies of 5.2%, certified by the National Renewable Energy Laboratory. [1] The presented polymer is the first low-bandgap semiconducting polymer to have a certified efficiency of over 5%. The chemical structure of the subject polymer is shown in Figure 1. The material was synthesized following the procedure described previously. [10] The synthesis and properties of the carbon-bridged polymer have been described before. [11,12] Figure 2a shows the absorbance and photoluminescence (PL) spectra of a thin solid film of the pristine Si-bridged polymer and

Near IR Sensitization of Organic Bulk Heterojunction Solar Cells: Towards Optimization of the Spectral Response of Organic Solar Cells

Abstract: The spectroscopic response of a poly(3-hexylthiophene)/[6,6]-phenyl-C 61 -butyric acid methyl ester (P3HT/PCBM)-based bulk heterojunction solar cell is extended into the near infrared region (NIR) of the spectrum by adding the low bandgap polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-ryclopenta[2,1-b;3,4-6]-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] [PCPDTBT] to the blend. The dominant mechanism behind the enhanced photosensitivity ofthe ternary blend is found to be a two-step process: first, an ultrafast and efficient photoinduced charge transfer generates positive charges on P3HT and PCPDTBT and a negative charge on PCBM. In a second step, the positive charge on PCPDTBT is transferred to P3HT. Thus, P3HT serves two purposes. On the one hand it is involved in the generation of charge carriers by the photoinduced electron transfer to PCBM, and, on the other hand, it forms the charge transport matrix for the positive carriers transferred from PCPDTBT. Other mechanisms, such as energy transfer or photoinduced charge transfer directly between the two polymers, are found to be absent or negligible.

Two Novel Cyclopentadithiophene-Based Alternating Copolymers as Potential Donor Components for High-Efficiency Bulk-Heterojunction-Type Solar Cells

Abstract: Polymer/fullerene bulk heterojunctions have recently generated a lot of scientific interest due to their potential in low-cost photovoltaic applications. In this paper we detail the synthesis and characterization of two new low-band-gap polythiophenes, poly[4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b′]dithiophene-2,6-diyl-alt-4,7-bis(2-thienyl)-2,1,3-benzothiadiazole-5′,5′′-diyl] (PCPDTTBTT) and poly[4,4-bis(2-ethylhexyl)-4H-cyclopenta[2,1-b:3,4-b′]dithiophene-2,6-diyl-alt-2,3-dioctylquinoxaline-5,8-diyl] (PCPDTQ), for use in these applications. The PCPDTQ polymer did not produce efficient solar cells. A high power efficiency of 2.1% under one sun was found for a PCPDTTBTT/fullerene mixture. The high efficiency was achieved by alteration of the morphology using a solvent additive. Analysis of atomic force microscopy phase images shows that material phases with distinct mixing ratios are formed and altered with the addition of the solvent additive.

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Bulk heterojunction solar cells with internal quantum efficiency approaching 100

Abstract: A polymer solar-cell based on a bulk hetereojunction design with an internal quantum efficiency of over 90% across the visible spectrum (425 nm to 575 nm) is reported. The device exhibits a power-conversion efficiency of 6% under standard air-mass 1.5 global illumination tests.

Polymer–Fullerene Composite Solar Cells

Abstract: Fossil fuel alternatives, such as solar energy, are moving to the forefront in a variety of research fields. Polymer-based organic photovoltaic systems hold the promise for a cost-effective, lightweight solar energy conversion platform, which could benefit from simple solution processing of the active layer. The function of such excitonic solar cells is based on photoinduced electron transfer from a donor to an acceptor. Fullerenes have become the ubiquitous acceptors because of their high electron affinity and ability to transport charge effectively. The most effective solar cells have been made from bicontinuous polymer–fullerene composites, or so-called bulk heterojunctions. The best solar cells currently achieve an efficiency of about 5 %, thus significant advances in the fundamental understanding of the complex interplay between the active layer morphology and electronic properties are required if this technology is to find viable application.

Polymer solar cells

Abstract: This Review summarizes recent progress in the development of polymer solar cells. It covers the scientific origins and basic properties of polymer solar cell technology, material requirements and device operation mechanisms, while also providing a synopsis of major achievements in the field over the past few years. Potential future developments and the applications of this technology are also briefly discussed.

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Abstract: -phenylenevinylene)s L4. Fluorene-Based Conjugated Polymers L4.1. Fluorene-Based Copolymers ContainingElectron-Rich MoietiesM4.2. Fluorene-Based Copolymers ContainingElectron-Deficient MoietiesN4.3. Fluorene-Based Copolymers ContainingPhosphorescent ComplexesQ5. Carbazole-Based Conjugated Polymers R5.1. Poly(2,7-carbazole)-Based Polymers R5.2. Indolo[3,2-