Martin Schaffer

Bio: Martin Schaffer is an academic researcher from University of Jena. The author has contributed to research in topics: Speckle pattern & Projection (set theory). The author has an hindex of 8, co-authored 19 publications receiving 314 citations.

High-speed pattern projection for three-dimensional shape measurement using laser speckles

Abstract: We propose a high-speed projection system that is able to project statistical speckle patterns at a rate of 500Hz. Its purpose is to generate structured light for a real-time photogrammetry stereo vision setup. As conventional digital light projector (DLP) projection setups are limited in their maximum projection rate to 250Hz for gray-value patterns, stripe projection systems are usually applied for real-time three-dimensional (3D) measurements. However, these techniques can only be used on steady surfaces as phase unwrapping has to be done. In contrast, the proposed setup is able to measure the shape of multiple spatially separated objects at once. We compare the speckle setup with a system using a DLP projector and with other fast 3D shape measurement setups, like the widely used stripe projection methods, qualitatively and quantitatively.

High-speed three-dimensional shape measurements of objects with laser speckles and acousto-optical deflection

Abstract: Many three-dimensional (3D) shape measurement techniques in stereophotogrammetry with temporal coded structured illumination are limited to static scenes because the time for measurement is too long in comparison to the object speed. The measurement of moving objects result in erroneous reconstructions. This is apparent to reduce measurement time to overcome this limitation, which is often done by increasing the projection rate for illumination while shrinking the amount of images taken for reconstruction. The projection rate limits most applications in its speed because digital light processing (DLP) projectors, which are widely used, bring a limited projection rate along. Our approach, in contrast, does not take a DLP. Instead we use laser speckles as projected patterns which are switched using an acousto-optical deflector. The projection rate is 10× higher than what the fastest stripe projection systems to our knowledge achieve. Hence, we present this uncommon but potential approach for highspeed (≈250 3Dfps= [3D measurements per second]), dense, and accurate 3D measurements of spatially separated objects and show the media that emphasizes the ability of accurate measurements while the objects under testing move.

Fast data acquisition for three-dimensional shape measurement using fixed-pattern projection and temporal coding

Abstract: The field of image-based shape measurements using structured illumination has been an active research area for several decades now. A lot of different methods are widely used e.g. for industrial inspection, surveillance as well as multimedia purposes. Usually, short measurement times and high correspondence accuracy are mutually exclusive properties, due to the limitations of the used projection technology. Using a standard stereo-photogrammetry approach, as well as a simple, yet powerful structured light projection concept based on a slide-projector, we demonstrate an acquisition rate of more than 700 dense and accurate 3D measurements per second.

3D shape measurement of static and moving objects with adaptive spatiotemporal correlation

Abstract: Common correlation-based photogrammetric 3D shape measurement techniques evaluate either temporal or spatial features. Temporal approaches achieve high accuracies but are limited to the measurement of static objects. Spatial techniques can deal with moving objects but provide relatively inaccurate results. Our goal is to combine these methods in order to measure dynamic scenes that contain static and moving objects. Therefore, we present a spatiotemporal correlation that adapts its temporal and spatial support locally to the motion of the measured objects. In addition, our technique compensates motion by warping the correlated image regions temporally. Our approach is based on structured illumination of random patterns, which are well suited for dynamic scenes due to high possible frame rates. The proposed technique is tested with simulated data and real measurements.

Coherent two-beam interference fringe projection for highspeed three-dimensional shape measurements

Abstract: Two-beam interference is a fundamental and well-understood approach to create Fizeau's interference fringes. With a Mach-Zehnder interferometer, we utilize these two-beam interference Fizeau fringes for three-dimensional (3D) shape measurements. By introducing an acousto-optical deflector the phase of the interference fringes can be shifted with a rate of up to 200,000 Hz. When used in conjunction with highspeed cameras, this stereo-photogrammetric approach performs well for highspeed applications in comparison with the commonly used digital light processing projectors for stripe projection. Maximum speed and the achievable accuracy are discussed. Experiments and media substantiate the suitability, accuracy, and speed of this technique for very fast 3D shape measurements.

Superfast multifrequency phase-shifting technique with optimal pulse width modulation.

Abstract: The technique of generating sinusoidal fringe patterns by defocusing squared binary structured ones has numerous merits for high-speed three-dimensional (3D) shape measurement. However, it is challenging for this method to realize a multifrequency phase-shifting (MFPS) algorithm because it is difficult to simultaneously generate high-quality sinusoidal fringe patterns with different periods. This paper proposes to realize an MFPS algorithm utilizing an optimal pulse width modulation (OPWM) technique that can selectively eliminate high-order harmonics of squared binary patterns. We successfully develop a 556 Hz system utilizing a three-frequency algorithm for simultaneously measuring multiple objects.