Mats Fahlman

Bio: Mats Fahlman is an academic researcher from Linköping University. The author has contributed to research in topics: X-ray photoelectron spectroscopy & PEDOT:PSS. The author has an hindex of 62, co-authored 258 publications receiving 15595 citations. Previous affiliations of Mats Fahlman include University of Mons & Ohio State University.

Optimization of the thermoelectric figure of merit in the conducting polymer poly(3,4-ethylenedioxythiophene)

Abstract: Thermoelectric generators (TEGs) transform a heat flow into electricity. Thermoelectric materials are being investigated for electricity production from waste heat (co-generation) and natural heat sources. For temperatures below 200 °C, the best commercially available inorganic semiconductors are bismuth telluride (Bi(2)Te(3))-based alloys, which possess a figure of merit ZT close to one. Most of the recently discovered thermoelectric materials with ZT>2 exhibit one common property, namely their low lattice thermal conductivities. Nevertheless, a high ZT value is not enough to create a viable technology platform for energy harvesting. To generate electricity from large volumes of warm fluids, heat exchangers must be functionalized with TEGs. This requires thermoelectric materials that are readily synthesized, air stable, environmentally friendly and solution processable to create patterns on large areas. Here we show that conducting polymers might be capable of meeting these demands. The accurate control of the oxidation level in poly(3,4-ethylenedioxythiophene) (PEDOT) combined with its low intrinsic thermal conductivity (λ=0.37 W m(-1) K(-1)) yields a ZT=0.25 at room temperature that approaches the values required for efficient devices.

Energy‐Level Alignment at Organic/Metal and Organic/Organic Interfaces

Abstract: In this Review, we summarize recent work on modeling of organic/metal and organic/organic interfaces. Some of the models discussed have a semiempirical approach, that is, experimentally derived values are used in combination with theory, and others rely completely of calculations. The models are categorized according to the types of interfaces they apply to, and the strength of the interaction at the interface has been used as the main factor. We explain the basics of the models, their use, and give examples on how the models correlate with experimental results. We stress that given the complexity of organic/metal and organic/organic interface formation, it is crucial to know the exact way in which the interface was formed before choosing the model that is applicable, as none of the models presented covers the whole range of interface interaction strengths (weak physisorption to strong chemisorption).

Planar perovskite solar cells with long-term stability using ionic liquid additives

Abstract: Solar cells based on metal halide perovskites are one of the most promising photovoltaic technologies(1-4). Over the past few years, the long-term operational stability of such devices has been gre ...

Rational molecular passivation for high-performance perovskite light-emitting diodes

Abstract: A major efficiency limit for solution-processed perovskite optoelectronic devices, for example light-emitting diodes, is trap-mediated non-radiative losses. Defect passivation using organic molecul ...

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

Electroluminescence in conjugated polymers

Abstract: Research in the use of organic polymers as the active semiconductors in light-emitting diodes has advanced rapidly, and prototype devices now meet realistic specifications for applications. These achievements have provided insight into many aspects of the background science, from design and synthesis of materials, through materials fabrication issues, to the semiconductor physics of these polymers.

Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology

Abstract: By applying the specific fabrication conditions summarized in the Experimental section and post-production annealing at 150 °C, polymer solar cells with power-conversion efficiency approaching 5 % are demonstrated. These devices exhibit remarkable thermal stability. We attribute the improved performance to changes in the bulk heterojunction material induced by thermal annealing. The improved nanoscale morphology, the increased crystallinity of the semiconducting polymer, and the improved contact to the electron-collecting electrode facilitate charge generation, charge transport to, and charge collection at the electrodes, thereby enhancing the device efficiency by lowering the series resistance of the polymer solar cells.

Polymer solar cells

Abstract: This Review summarizes recent progress in the development of polymer solar cells. It covers the scientific origins and basic properties of polymer solar cell technology, material requirements and device operation mechanisms, while also providing a synopsis of major achievements in the field over the past few years. Potential future developments and the applications of this technology are also briefly discussed.