Matthias Geissler

Bio: Matthias Geissler is an academic researcher from National Research Council. The author has contributed to research in topics: Microcontact printing & Substrate (printing). The author has an hindex of 29, co-authored 67 publications receiving 3883 citations. Previous affiliations of Matthias Geissler include University of Washington & University of Jena.

Patterning: Principles and Some New Developments

Abstract: This article provides an overview of various patterning methodologies, and it is organized into three major sections: generation of patterns, replication of patterns, and three-dimensional patterning. Generation of patterns from scratch is usually accomplished by serial techniques that are able to provide arbitrary features. The writing process can be carried out in many different ways. It can be achieved using a rigid stylus; or a focused beam of photons, electrons, and other energetic particles. It can also be accomplished using an electrical or magnetic field; or through localized add-on of materials such as a liquid-like ink from an external source. In addition, some ordered but relatively simple patterns can be formed by means of self-assembly. In replication of patterns, structural information from a mask, master, or stamp is transferred to multiple copies with the use of an appropriate material. The patterned features on a mask are mainly used to direct a flux of radiation or physical matter from a source onto a substrate, whereas a master/stamp serves as the original for replication based on embossing, molding, or printing. The last section of this article deals with three-dimensional patterning, where both vertical and lateral dimensions of a structure need to be precisely controlled to generate well-defined shapes and profiles. The article is illustrated with various examples derived from recent developments in this field.

Printing meets lithography: soft approaches to high-resolution patterning

Abstract: We are developing a high-resolution printing technique based on transferring a pattern from an elastomeric stamp to a solid substrate by conformal contact. This is an attempt to enhance the accuracy of classical printing to a precision comparable with optical lithography, creating a low-cost, large-area, high-resolution patterning process. First, we introduce the components of this technique, called soft lithography, and review its evolution. Topics described in detail are the stamp material, stamp architecture, pattern design rules, and printing tools. The accuracy of the prints made by thin patterned elastomeric layers supported on a stiff and flexible backplane is then assessed, and defects are characterized using a new electrical metrology approach. This is followed by a discussion of various printing processes used in our laboratory: 1) thiol printing for high-resolution patterns of noble metals that may also be used as sacrificial masks; 2) confined contact processing with liquids in cavities or channels to chemically convert a substrate or deposit layers of materials or biomolecules; 3) printing of catalysts to mediate patterned deposition of metals; and 4) structured, light-guiding stamps for transferring high-resolution patterns into photoresists. Finally, we compare classical and high-resolution printing approaches, and describe their potential for emerging micro-and nano-scale patterning technologies.

Single-Crystal Nanowires of Platinum Can Be Synthesized by Controlling the Reaction Rate of a Polyol Process

Abstract: Platinum nanowires of approximately 100 nm in length and approximately 5 nm in diameter have been synthesized by reducing H(2)PtCl(6) with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) and a trace amount of Fe(3+) or Fe(2+). The wires were generated at the final stage of the synthesis, which involved the formation of several intermediate species. The Fe(3+) or Fe(2+) ions had dual functions in the synthesis: they induced aggregation of Pt nanoparticles into larger structures that served as the nucleation sites, and they greatly reduced the reaction rate and supersaturation level to induce anisotropic growth. The reaction mechanism was studied by X-ray photoelectron spectroscopy (XPS) and UV-vis spectral analysis. The Pt nanowires could be readily separated from the surfaces of the agglomerates by sonication and obtained as pure samples by centrifugation.

Edge spreading lithography and its application to the fabrication of mesoscopic gold and silver rings.

Abstract: A new form of edge lithography, edge spreading lithography (ESL), has been demonstrated and applied to the formation of coinage metal rings. In this process, alkanethiols are delivered from a flat PDMS stamp to the surface of a metal film through a two-dimensional array of spherical silica colloids. The thiols further spread on the metal surface, forming highly ordered SAMs in the form of a ring pattern. Following lift-off of beads, the pattern in the SAMs can be transferred into the metal film through wet chemical etching, with SAMs serving as the resist. The dimensions of the rings can be readily controlled by several parameters such as the beads diameter, the concentration of the thiol solution, and the contact time between the stamp and the silica beads.

Shape‐Controlled Synthesis of Metal Nanocrystals: Simple Chemistry Meets Complex Physics?

Abstract: Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution-phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape-controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.

Solvent compatibility of poly(dimethylsiloxane)-based microfluidic devices.

Abstract: This paper describes the compatibility of poly(dimethylsiloxane) (PDMS) with organic solvents; this compatibility is important in considering the potential of PDMS-based microfluidic devices in a number of applications, including that of microreactors for organic reactions. We considered three aspects of compatibility: the swelling of PDMS in a solvent, the partitioning of solutes between a solvent and PDMS, and the dissolution of PDMS oligomers in a solvent. Of these three parameters that determine the compatibility of PDMS with a solvent, the swelling of PDMS had the greatest influence. Experimental measurements of swelling were correlated with the solubility parameter, δ (cal1/2 cm-3/2), which is based on the cohesive energy densities, c (cal/cm3), of the materials. Solvents that swelled PDMS the least included water, nitromethane, dimethyl sulfoxide, ethylene glycol, perfluorotributylamine, perfluorodecalin, acetonitrile, and propylene carbonate; solvents that swelled PDMS the most were diisopropylam...

Soft lithography for micro- and nanoscale patterning

Abstract: This protocol provides an introduction to soft lithography--a collection of techniques based on printing, molding and embossing with an elastomeric stamp. Soft lithography provides access to three-dimensional and curved structures, tolerates a wide variety of materials, generates well-defined and controllable surface chemistries, and is generally compatible with biological applications. It is also low in cost, experimentally convenient and has emerged as a technology useful for a number of applications that include cell biology, microfluidics, lab-on-a-chip, microelectromechanical systems and flexible electronics/photonics. As examples, here we focus on three of the commonly used soft lithographic techniques: (i) microcontact printing of alkanethiols and proteins on gold-coated and glass substrates; (ii) replica molding for fabrication of microfluidic devices in poly(dimethyl siloxane), and of nanostructures in polyurethane or epoxy; and (iii) solvent-assisted micromolding of nanostructures in poly(methyl methacrylate).