scispace - formally typeset
Search or ask a question
Author

Matthieu Kanj

Bio: Matthieu Kanj is an academic researcher. The author has contributed to research in topics: Optical amplifier & The Internet. The author has an hindex of 1, co-authored 2 publications receiving 7 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: A new routing algorithm and protocol extensions are proposed to take into account power and regeneration information in the GMPLS control plane of translucent networks, and thus, the power adaptation process is adapted to this kind of network.
Abstract: The continuously increasing traffic of Internet services (cloud services, video streaming, social networks, and recently, Internet of Things services) is leading to huge traffic growth in core optical networks. This traffic evolution is pushing network operators to efficiently exploit their infrastructures in order to postpone, as much as possible, the expensive deployment of new infrastructures. In this respect, the migration from fixed-to flex-grid optical networks was triggered in order to efficiently use optical network capacity, taking benefits from the improved spectral efficiency of flexible transponders. In our previous work [J. Opt. Commun. Netw., vol. 8, no. 8, p. 553, Aug. 2016], we demonstrated that migrating towards flexible networks while keeping in use existing optical amplifiers will cause a power saturation problem over highly loaded links due to the increase in the number of optical channels. To overcome this problem, we proposed in that work a power adaptation process that consists of converting transmission performance margins into optical power attenuation over optical links. However, the realized work considered only a transparent optical network controlled by the generalized multiprotocol label switching (GMPLS) protocol suite. In this paper, we consider the case of a translucent optical network where optical regeneration is required, and thus, the power adaptation process is adapted to this kind of network. A new routing algorithm and protocol extensions are proposed to take into account power and regeneration information in the GMPLS control plane of translucent networks.

11 citations

Proceedings ArticleDOI
17 Sep 2017
TL;DR: It is demonstrated that optimizing regeneration sites allows reducing the optical power of highly loaded links, avoiding amplifiers saturation over the existing fixed-grid networks.
Abstract: Flex-grid technology increases network links capacity and optical power levels, creating power saturation problem in legacy amplifiers. We demonstrate that optimizing regeneration sites allows reducing the optical power of highly loaded links, avoiding amplifiers saturation over the existing fixed-grid networks.

1 citations


Cited by
More filters
01 Jan 2010
TL;DR: In this paper, the authors present a sensitivity study on how launch optical power can be managed to control the CAPEX of a mixed line rate (i.e., 10/40/100 Gbps wavelengths on same fiber) optical network.
Abstract: We present a sensitivity study on how launch optical power can be managed to control the CAPEX of a mixed line rate (i.e., 10/40/100 Gbps wavelengths on same fiber) optical network.

17 citations

Journal ArticleDOI
TL;DR: This work considers progressive spectral exploitation, starting from the C-band only and up to C+L+S+U-band transmission, for both transparent and translucent solutions that exploit optical signal regeneration, and derives a networking performance metric that enables the comparison of different solutions in terms of capacity allocation and energy consumption.
Abstract: Multi-band optical fiber transmission is generally proposed for capacity upgrades in optical transport networks. To comprehensively assess the potential of multi-band transmission, key metrics such as the potential capacity increase, energy consumption, and the number of required interfaces must be evaluated for different transmission scenarios. We consider progressive spectral exploitation, starting from the C-band only and up to C+L+S+U-band transmission, for both transparent and translucent solutions that exploit optical signal regeneration. By considering accurate state-of-the-art physical layer models, we derive a networking performance metric that enables the comparison of different solutions in terms of capacity allocation and energy consumption. For a translucent network design, different regenerator placement algorithms are compared, with the aim of minimizing energy consumption. The proposed network-wide numerical analysis shows that, for spectral occupations exceeding the C+L-band, translucent solutions can significantly increase network capacity, while leading to a similar energy consumption per transmitted bit as in the transparent design case, but they require the deployment of additional line interfaces. Significantly, these results provide evidence that the transparent exploitation of an additional transmission band produces a capacity increment that is at least comparable to that of a translucent solution based on already-in-use bands. Since this is attained at the expense of fewer line interfaces, it is a key finding suggesting that extending the number of bands supported is a cost-effective approach to scaling the capacity of existing fiber infrastructures.

11 citations

Journal ArticleDOI
TL;DR: A new routing algorithm and protocol extensions are proposed to take into account power and regeneration information in the GMPLS control plane of translucent networks, and thus, the power adaptation process is adapted to this kind of network.
Abstract: The continuously increasing traffic of Internet services (cloud services, video streaming, social networks, and recently, Internet of Things services) is leading to huge traffic growth in core optical networks. This traffic evolution is pushing network operators to efficiently exploit their infrastructures in order to postpone, as much as possible, the expensive deployment of new infrastructures. In this respect, the migration from fixed-to flex-grid optical networks was triggered in order to efficiently use optical network capacity, taking benefits from the improved spectral efficiency of flexible transponders. In our previous work [J. Opt. Commun. Netw., vol. 8, no. 8, p. 553, Aug. 2016], we demonstrated that migrating towards flexible networks while keeping in use existing optical amplifiers will cause a power saturation problem over highly loaded links due to the increase in the number of optical channels. To overcome this problem, we proposed in that work a power adaptation process that consists of converting transmission performance margins into optical power attenuation over optical links. However, the realized work considered only a transparent optical network controlled by the generalized multiprotocol label switching (GMPLS) protocol suite. In this paper, we consider the case of a translucent optical network where optical regeneration is required, and thus, the power adaptation process is adapted to this kind of network. A new routing algorithm and protocol extensions are proposed to take into account power and regeneration information in the GMPLS control plane of translucent networks.

11 citations

Journal ArticleDOI
TL;DR: A dynamical power allocation procedure for elastic optical networks (EONs) based on the evolutionary hurricane search optimization (HSO) algorithm with a chaotic logistic map diversification strategy with the purpose of improving the capability to escape from local optima, namely PA-CHSO is proposed.
Abstract: In this paper, we propose a dynamical power allocation (PA) procedure for elastic optical networks (EONs) based on the evolutionary hurricane search optimization (HSO) algorithm with a chaotic logistic map diversification strategy with the purpose of improving the capability to escape from local optima, namely PA-CHSO. The aiming is the dynamical control of the transmitted optical powers according to the variations of each link state due to traffic fluctuations, channel impairments, as well as other channel-power coupling effects. Such realistic EON scenarios are affected mainly by the channel estimation inaccuracy, channel ageing and power fluctuations. The link state is based on the channel estimation and quality of transmission (QoT) parameters obtained from the optical performance monitors (OPMs). Numerical results have demonstrated the effectiveness of the PA-CHSO to dynamically mitigate the power penalty under real measurement conditions with uncertainties and noise, as well as when perturbations in the optical transmit powers are considered.

5 citations

Journal ArticleDOI
TL;DR: The A-CHSO has been proved to be an efficient power allocation (PA) method for operation in EONs, corroborating the dynamical and flexible aspects of the EONSs.

4 citations