Mei Qing Qi

Bio: Mei Qing Qi is an academic researcher from Southeast University. The author has contributed to research in topics: Metamaterial & Split-ring resonator. The author has an hindex of 23, co-authored 37 publications receiving 3936 citations.

Coding metamaterials, digital metamaterials and programmable metamaterials

Abstract: Smart materials offering great freedom in manipulating electromagnetic radiation have been developed. This exciting new concept was realized by Tie Jun Cui and co-workers at the Southeast University, China, who developed digital metamaterials consisting of two kinds of unit cells whose different phase responses allow them to act as ‘0’ and ‘1’ bits. These cells can be judiciously arranged in sequences to enable controlled manipulation of electromagnetic waves. This is one-bit coding; higher-bit coding is possible by employing more kinds of unit cells. The researchers developed a metamaterial cell whose binary response can be controlled by a biased diode. By using a field-programmable gate array, they demonstrated that this digital metamaterial can be programmed. Such metamaterials are attractive for controlling radiation beams in antennas and for realizing other ‘smart’ metamaterials.

Coding Metamaterials, Digital Metamaterials and Programming Metamaterials

Abstract: As artificial structures, metamaterials are usually described by macroscopic effective medium parameters, which are named as "analog metamaterials". Here, we propose "digital metamaterials" in two steps. Firstly, we present "coding metamaterials" that are composed of only two kinds of unit cells with 0 and {\pi} phase responses, which we name as "0" and "1" elements. By coding "0" and "1" elements with controlled sequences (i.e., 1-bit coding), we can manipulate electromagnetic (EM) waves and realize different functionalities. The concept of coding metamaterial can be extended from 1-bit coding to 2-bit or more. In 2-bit coding, four kinds of unit cells with phase responses 0, {\pi}/2, {\pi}, and 3{\pi}/2 are required to mimic "00", "01", "10" and "11" elements, which have larger freedom to control EM waves. Secondly, we propose a unique metamaterial particle which has either "0" or "1" response controlled by a biased diode. Based on the particle, we present "digital metamaterials" with unit cells having either "0" or "1" state. Using the field-programmable gate array, we realize to control the digital metamaterial digitally. By programming different coding sequences, a single digital metamaterial has distinct abilities in manipulating EM waves, realizing the "programming metamaterials". The above concepts and physical phenomena are confirmed by numerical simulations and experiments through metasurfaces.

Convolution Operations on Coding Metasurface to Reach Flexible and Continuous Controls of Terahertz Beams

Abstract: The concept of coding metasurface makes a link between physically metamaterial particles and digital codes, and hence it is possible to perform digital signal processing on the coding metasurface to realize unusual physical phenomena. Here, this study presents to perform Fourier operations on coding metasurfaces and proposes a principle called as scattering-pattern shift using the convolution theorem, which allows steering of the scattering pattern to an arbitrarily predesigned direction. Owing to the constant reflection amplitude of coding particles, the required coding pattern can be simply achieved by the modulus of two coding matrices. This study demonstrates that the scattering patterns that are directly calculated from the coding pattern using the Fourier transform have excellent agreements to the numerical simulations based on realistic coding structures, providing an efficient method in optimizing coding patterns to achieve predesigned scattering beams. The most important advantage of this approach over the previous schemes in producing anomalous single-beam scattering is its flexible and continuous controls to arbitrary directions. This work opens a new route to study metamaterial from a fully digital perspective, predicting the possibility of combining conventional theorems in digital signal processing with the coding metasurface to realize more powerful manipulations of electromagnetic waves.

A tunable metamaterial absorber using varactor diodes

Abstract: We present the design, analysis and measurements of a polarization-insensitive tunable metamaterial absorber with varactor diodes embedded between metamaterial units. The basic unit shows excellent absorptivity in the designed frequency band over a wide range of incident angles. By regulating the reverse bias voltage on the varactor diode, the absorption frequency of the designed unit can be controlled continuously. The absorption mechanism is interpreted using the electromagnetic-wave interference theory. When the metamaterial units are placed along two orthogonal directions, the absorber is insensitive to the polarization of incident waves. The tunability of the absorber has been verified by experimental results with the measured bandwidth of 1.5?GHz (or relative bandwidth of 30%).

Field-programmable beam reconfiguring based on digitally-controlled coding metasurface

Abstract: Digital phase shifters have been applied in traditional phased array antennas to realize beam steering. However, the phase shifter deals with the phase of the induced current; hence, it has to be in the path of each element of the antenna array, making the phased array antennas very expensive. Metamaterials and/or metasurfaces enable the direct modulation of electromagnetic waves by designing subwavelength structures, which opens a new way to control the beam scanning. Here, we present a direct digital mechanism to control the scattered electromagnetic waves using coding metasurface, in which each unit cell loads a pin diode to produce binary coding states of “1” and “0”. Through data lines, the instant communications are established between the coding metasurface and the internal memory of field-programmable gate arrays (FPGA). Thus, we realize the digital modulation of electromagnetic waves, from which we present the field-programmable reflective antenna with good measurement performance. The proposed mechanism and functional device have great application potential in new-concept radar and communication systems.

Intelligent Reflecting Surface Enhanced Wireless Network via Joint Active and Passive Beamforming

Abstract: Intelligent reflecting surface (IRS) is a revolutionary and transformative technology for achieving spectrum and energy efficient wireless communication cost-effectively in the future. Specifically, an IRS consists of a large number of low-cost passive elements each being able to reflect the incident signal independently with an adjustable phase shift so as to collaboratively achieve three-dimensional (3D) passive beamforming without the need of any transmit radio-frequency (RF) chains. In this paper, we study an IRS-aided single-cell wireless system where one IRS is deployed to assist in the communications between a multi-antenna access point (AP) and multiple single-antenna users. We formulate and solve new problems to minimize the total transmit power at the AP by jointly optimizing the transmit beamforming by active antenna array at the AP and reflect beamforming by passive phase shifters at the IRS, subject to users’ individual signal-to-interference-plus-noise ratio (SINR) constraints. Moreover, we analyze the asymptotic performance of IRS’s passive beamforming with infinitely large number of reflecting elements and compare it to that of the traditional active beamforming/relaying. Simulation results demonstrate that an IRS-aided MIMO system can achieve the same rate performance as a benchmark massive MIMO system without using IRS, but with significantly reduced active antennas/RF chains. We also draw useful insights into optimally deploying IRS in future wireless systems.

Towards Smart and Reconfigurable Environment: Intelligent Reflecting Surface Aided Wireless Network

Abstract: IRS is a new and revolutionizing technology that is able to significantly improve the performance of wireless communication networks, by smartly reconfiguring the wireless propagation environment with the use of massive low-cost passive reflecting elements integrated on a planar surface. Specifically, different elements of an IRS can independently reflect the incident signal by controlling its amplitude and/or phase and thereby collaboratively achieve fine-grained 3D passive beamforming for directional signal enhancement or nulling. In this article, we first provide an overview of the IRS technology, including its main applications in wireless communication, competitive advantages over existing technologies, hardware architecture as well as the corresponding new signal model. We then address the key challenges in designing and implementing the new IRS-aided hybrid (with both active and passive components) wireless network, as compared to the traditional network comprising active components only. Finally, numerical results are provided to show the great performance enhancement with the use of IRS in typical wireless networks.

Intelligent Reflecting Surface-Aided Wireless Communications: A Tutorial

Abstract: Intelligent reflecting surface (IRS) is an enabling technology to engineer the radio signal propagation in wireless networks. By smartly tuning the signal reflection via a large number of low-cost passive reflecting elements, IRS is capable of dynamically altering wireless channels to enhance the communication performance. It is thus expected that the new IRS-aided hybrid wireless network comprising both active and passive components will be highly promising to achieve a sustainable capacity growth cost-effectively in the future. Despite its great potential, IRS faces new challenges to be efficiently integrated into wireless networks, such as reflection optimization, channel estimation, and deployment from communication design perspectives. In this paper, we provide a tutorial overview of IRS-aided wireless communications to address the above issues, and elaborate its reflection and channel models, hardware architecture and practical constraints, as well as various appealing applications in wireless networks. Moreover, we highlight important directions worthy of further investigation in future work.

Towards Smart and Reconfigurable Environment: Intelligent Reflecting Surface Aided Wireless Network

Abstract: Although the fifth-generation (5G) technologies will significantly improve the spectrum and energy efficiency of today's wireless communication networks, their high complexity and hardware cost as well as increasingly more energy consumption are still crucial issues to be solved. Furthermore, despite that such technologies are generally capable of adapting to the space and time varying wireless environment, the signal propagation over it is essentially random and largely uncontrollable. Recently, intelligent reflecting surface (IRS) has been proposed as a revolutionizing solution to address this open issue, by smartly reconfiguring the wireless propagation environment with the use of massive low-cost, passive, reflective elements integrated on a planar surface. Specifically, different elements of an IRS can independently reflect the incident signal by controlling its amplitude and/or phase and thereby collaboratively achieve fine-grained three-dimensional (3D) passive beamforming for signal enhancement or cancellation. In this article, we provide an overview of the IRS technology, including its main applications in wireless communication, competitive advantages over existing technologies, hardware architecture as well as the corresponding new signal model. We focus on the key challenges in designing and implementing the new IRS-aided hybrid (with both active and passive components) wireless network, as compared to the traditional network comprising active components only. Furthermore, numerical results are provided to show the potential for significant performance enhancement with the use of IRS in typical wireless network scenarios.

Smart Radio Environments Empowered by Reconfigurable Intelligent Surfaces: How It Works, State of Research, and The Road Ahead

Abstract: Reconfigurable intelligent surfaces (RISs) are an emerging transmission technology for application to wireless communications. RISs can be realized in different ways, which include (i) large arrays of inexpensive antennas that are usually spaced half of the wavelength apart; and (ii) metamaterial-based planar or conformal large surfaces whose scattering elements have sizes and inter-distances much smaller than the wavelength. Compared with other transmission technologies, e.g., phased arrays, multi-antenna transmitters, and relays, RISs require the largest number of scattering elements, but each of them needs to be backed by the fewest and least costly components. Also, no power amplifiers are usually needed. For these reasons, RISs constitute a promising software-defined architecture that can be realized at reduced cost, size, weight, and power (C-SWaP design), and are regarded as an enabling technology for realizing the emerging concept of smart radio environments (SREs). In this paper, we (i) introduce the emerging research field of RIS-empowered SREs; (ii) overview the most suitable applications of RISs in wireless networks; (iii) present an electromagnetic-based communication-theoretic framework for analyzing and optimizing metamaterial-based RISs; (iv) provide a comprehensive overview of the current state of research; and (v) discuss the most important research issues to tackle. Owing to the interdisciplinary essence of RIS-empowered SREs, finally, we put forth the need of reconciling and reuniting C. E. Shannon’s mathematical theory of communication with G. Green’s and J. C. Maxwell’s mathematical theories of electromagnetism for appropriately modeling, analyzing, optimizing, and deploying future wireless networks empowered by RISs.