Mei Wang

Bio: Mei Wang is an academic researcher. The author has contributed to research in topics: Work function & Indium tin oxide. The author has an hindex of 1, co-authored 1 publications receiving 340 citations.

Characterization of treated indium-tin-oxide surfaces used in electroluminescent devices

Abstract: The influence of oxidative and reductive treatments of indium–tin–oxide (ITO) on the performance of electroluminescent devices is presented. The improvement in device performance is correlated with the surface chemical composition and work function. The work function is shown to be largely determined by the surface oxygen concentration. Oxygen-glow discharge or ultraviolet–ozone treatments increase the surface oxygen concentration and work function in a strongly correlated manner. High temperature, vacuum annealing reduces both the surface oxygen and work function. With oxidation the occupied, density of states (DOS) at the Fermi level is also greatly reduced. This process is reversible by vacuum annealing and it appears that the oxygen concentration, work function, and DOS can be cycled by repeated oxygen treatments and annealing. These observations are interpreted in terms of the well-known, bulk properties of ITO.

Recent progress of molecular organic electroluminescent materials and devices

Abstract: Electroluminescent devices based on organic materials are of considerable interest owing to their attractive characteristics and potential applications to flat panel displays. After a brief overview of the device construction and operating principles, a review is presented on recent progress in organic electroluminescent materials and devices. Small molecular materials are described with emphasis on their material issues pertaining to charge transport, color, and luminance efficiencies. The chemical nature of electrode/organic interfaces and its impact on device performance are then discussed. Particular attention is paid to recent advances in interface engineering that is of paramount importance to modify the chemical and electronic structure of the interface. The topics in this report also include recent development on the enhancement of electron transport capability in organic materials by doping and the increase in luminance efficiency by utilizing electrophosphorescent materials. Of particular interest for the subject of this review are device reliability and its relationship with material characteristics and interface structures. Important issues relating to display fabrication and the status of display development are briefly addressed as well.

PEDOT:PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells

Abstract: The conductivity of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films was significantly enhanced by preferential solvations of the hydrophobic PEDOT and hydrophilic PSS chains with cosolvents. When a PEDOT:PSS film prepared from the PEDOT:PSS aqueous solution was treated with water or a common organic solvent like ethanol, iso-propyl alcohol (IPA), acetonitrile (ACN), acetone, or tetrahydrofuran (THF), its conductivity did not change remarkably. But the conductivity was significantly enhanced when the PEDOT:PSS film was treated with a cosolvent of water and one of these common organic solvents. The conductivity enhancement was affected by several factors, including the ratio of the organic solvent to water, the dielectric constant of the organic solvent, and the temperature during the treatment. The conductivity enhancement from 0.2 S cm−1 to 103 S cm−1 was observed. The significant conductivity enhancement is attributed to the preferential solvation of PEDOT:PSS with a cosolvent. Water and the organic solvent of the cosolvent preferentially solvate the hydrophilic PSS and hydrophobic PEDOT chains, respectively. The preferential solvation of a PEDOT:PSS film with a cosolvent induces the phase separation of the insulator PSSH chains from the PEDOT:PSS film, aggregation of PSSH segments in the PEDOT:PSS film, and the conformational change of the PEDOT chains from coiled to linear. The cosolvent-treated PEDOT:PSS films were quite smooth and could be used to replace indium tin oxide (ITO) as the transparent electrode of electronic devices. Polymer photovoltaic cells (PVs) with the cosolvent-treated PEDOT:PSS films as the transparent electrode exhibited high photovoltaic performance.

Airway smooth muscle dynamics: A common pathway of airway obstruction in asthma

Abstract: Excessive airway obstruction is the cause of symptoms and abnormal lung function in asthma. As airway smooth muscle (ASM) is the effecter controlling airway calibre, it is suspected that dysfunction of ASM contributes to the pathophysiology of asthma. However, the precise role of ASM in the series of events leading to asthmatic symptoms is not clear. It is not certain whether, in asthma, there is a change in the intrinsic properties of ASM, a change in the structure and mechanical properties of the noncontractile components of the airway wall, or a change in the interdependence of the airway wall with the surrounding lung parenchyma. All these potential changes could result from acute or chronic airway inflammation and associated tissue repair and remodelling. Anti-inflammatory therapy, however, does not "cure" asthma, and airway hyperresponsiveness can persist in asthmatics, even in the absence of airway inflammation. This is perhaps because the therapy does not directly address a fundamental abnormality of asthma, that of exaggerated airway narrowing due to excessive shortening of ASM. In the present study, a central role for airway smooth muscle in the pathogenesis of airway hyperresponsiveness in asthma is explored.