Michael Brenner

Bio: Michael Brenner is an academic researcher from University of Michigan. The author has contributed to research in topics: Medicine & Computer science. The author has an hindex of 76, co-authored 564 publications receiving 22010 citations. Previous affiliations of Michael Brenner include Ludwig Maximilian University of Munich & American University.

Electrospinning and electrically forced jets. I. Stability theory

Abstract: Electrospinning is a process in which solid fibers are produced from a polymeric fluid stream (solution or melt) delivered through a millimeter-scale nozzle. The solid fibers are notable for their very small diameters (<1 μm). Recent experiments demonstrate that an essential mechanism of electrospinning is a rapidly whipping fluid jet. This series of papers analyzes the mechanics of this whipping jet by studying the instability of an electrically forced fluid jet with increasing field strength. An asymptotic approximation of the equations of electrohydrodynamics is developed so that quantitative comparisons with experiments can be carried out. The approximation governs both long wavelength axisymmetric distortions of the jet, as well as long wavelength oscillations of the centerline of the jet. Three different instabilities are identified: the classical (axisymmetric) Rayleigh instability, and electric field induced axisymmetric and whipping instabilities. At increasing field strengths, the electrical instabilities are enhanced whereas the Rayleigh instability is suppressed. Which instability dominates depends strongly on the surface charge density and radius of the jet. The physical mechanisms for the instability are discussed in the various possible limits.

Controlling the fiber diameter during electrospinning.

Abstract: We present a simple analytical model for the forces that determine jet diameter during electrospinning as a function of surface tension, flow rate, and electric current in the jet. The model predicts the existence of a terminal jet diameter, beyond which further thinning of the jet due to growth of the whipping instability does not occur. Experimental data for various electrospun fibers attest to the accuracy of the model.

Single bubble sonoluminescence

Abstract: Single-bubble sonoluminescence occurs when an acoustically trapped and periodically driven gas bubble collapses so strongly that the energy focusing at collapse leads to light emission. Detailed experiments have demonstrated the unique properties of this system: the spectrum of the emitted light tends to peak in the ultraviolet and depends strongly on the type of gas dissolved in the liquid; small amounts of trace noble gases or other impurities can dramatically change the amount of light emission, which is also affected by small changes in other operating parameters (mainly forcing pressure, dissolved gas concentration, and liquid temperature). This article reviews experimental and theoretical efforts to understand this phenomenon. The currently available information favors a description of sonoluminescence caused by adiabatic heating of the bubble at collapse, leading to partial ionization of the gas inside the bubble and to thermal emission such as bremsstrahlung. After a brief historical review, the authors survey the major areas of research: Section II describes the classical theory of bubble dynamics, as developed by Rayleigh, Plesset, Prosperetti, and others, while Sec. III describes research on the gas dynamics inside the bubble. Shock waves inside the bubble do not seem to play a prominent role in the process. Section IV discusses the hydrodynamic and chemical stability of the bubble. Stable single-bubble sonoluminescence requires that the bubble be shape stable and diffusively stable, and, together with an energy focusing condition, this fixes the parameter space where light emission occurs. Section V describes experiments and models addressing the origin of the light emission. The final section presents an overview of what is known, and outlines some directions for future research.

Electrospinning and electrically forced jets. II. Applications

Abstract: Electrospinning is a process in which solid fibers are produced from a polymeric fluid stream (solution or melt) delivered through a millimeter-scale nozzle. This article uses the stability theory described in the previous article to develop a quantitative method for predicting when electrospinning occurs. First a method for calculating the shape and charge density of a steady jet as it thins from the nozzle is presented and is shown to capture quantitative features of the experiments. Then, this information is combined with the stability analysis to predict scaling laws for the jet behavior and to produce operating diagrams for when electrospinning occurs, both as a function of experimental parameters. Predictions for how the regime of electrospinning changes as a function of the fluid conductivity and viscosity are presented.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

Standards of Medical Care in Diabetes

Abstract: XI. STRATEGIES FOR IMPROVING DIABETES CARE D iabetes is a chronic illness that requires continuing medical care and patient self-management education to prevent acute complications and to reduce the risk of long-term complications. Diabetes care is complex and requires that many issues, beyond glycemic control, be addressed. A large body of evidence exists that supports a range of interventions to improve diabetes outcomes. These standards of care are intended to provide clinicians, patients, researchers, payors, and other interested individuals with the components of diabetes care, treatment goals, and tools to evaluate the quality of care. While individual preferences, comorbidities, and other patient factors may require modification of goals, targets that are desirable for most patients with diabetes are provided. These standards are not intended to preclude more extensive evaluation and management of the patient by other specialists as needed. For more detailed information, refer to Bode (Ed.): Medical Management of Type 1 Diabetes (1), Burant (Ed): Medical Management of Type 2 Diabetes (2), and Klingensmith (Ed): Intensive Diabetes Management (3). The recommendations included are diagnostic and therapeutic actions that are known or believed to favorably affect health outcomes of patients with diabetes. A grading system (Table 1), developed by the American Diabetes Association (ADA) and modeled after existing methods, was utilized to clarify and codify the evidence that forms the basis for the recommendations. The level of evidence that supports each recommendation is listed after each recommendation using the letters A, B, C, or E.