scispace - formally typeset
Search or ask a question
Author

Michael Grätzel

Bio: Michael Grätzel is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Dye-sensitized solar cell & Perovskite (structure). The author has an hindex of 248, co-authored 1423 publications receiving 303599 citations. Previous affiliations of Michael Grätzel include University of California, Berkeley & Siemens Energy Sector.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the formation of extremely smooth and uniform formamidinium lead bromide (CH(NH2)(2)PbBr3 = FAPbBr(3)) films using an optimum mixture of dimethyl sulfoxide and N,N-dimethylformamide solvents was demonstrated.
Abstract: This study demonstrates the formation of extremely smooth and uniform formamidinium lead bromide (CH(NH2)(2)PbBr3 = FAPbBr(3)) films using an optimum mixture of dimethyl sulfoxide and N,N-dimethylformamide solvents. Surface morphology and phase purity of the FAPbBr(3) films are thoroughly examined by field emission scanning electron microscopy and powder X-ray diffraction, respectively. To unravel the photophysical properties of these films, systematic investigation based on time-integrated and time-dependent photoluminescence studies are carried out which, respectively, bring out relatively lower nonradiative recombination rates and long lasting photogenerated charge carriers in FAPbBr(3) perovskite films. The devices based on FTO/TiO2/FAPbBr(3)/spiro-OMeTAD/Au show highly reproducible open-circuit voltage (V-oc) of 1.42 V, a record for FAPbBr(3)-based perovskite solar cells. V-oc as a function of illumination intensity indicates that the contacts are very selective and higher V-oc values are expected to be achieved when the quality of the FAPbBr(3) film is further improved. Overall, the devices based on these films reveal appreciable power conversion efficiency of 7% under standard illumination conditions with negligible hysteresis. Finally, the amplified spontaneous emission (ASE) behavior explored in a cavity-free configuration for FAPbBr(3) perovskite films shows a sharp ASE threshold at a fluence of 190 mu J cm(-2) with high quantum efficiency further confirming the high quality of the films.

70 citations

Journal ArticleDOI
TL;DR: In this paper, nine different sensitizers, selected based on their different properties in terms of light absorption, chemical structure, and hydrophobic/hydrophilic nature, are systematically investigated to identify some useful guidelines to choose and design suitable dyes of different colors for truly aqueous DSSCs.
Abstract: O'Regan and Gratzel conceived a dye-sensitized solar cell (DSSC), which operates as an artificial photosynthetic system converting solar light into electricity. Nevertheless, it is only recently that the scientific community is focusing on truly aqueous DSSCs that use water as electrolyte, thus avoiding any flammable and toxic organic solvents. The most critical aspect of these devices is the photoanode/electrolyte interface. Indeed, it is necessary to select dyes that chemisorb onto the semiconductor layer while allowing the aqueous electrolyte to thoroughly impregnate the mesostructure of the electrode; at the same time, it is necessary to avoid the anchoring unit of the dye to be hydrolyzed by water, thus causing the detachment of the sensitizer from the active material particles. This requires a thorough analysis of the structure-property relationships, in particular the evaluation of the chemical formula, stability, and performances of the dyes on the electrode surface in truly aqueous environment. Herein, we investigate nine different sensitizers, selected based on their different properties in terms of light absorption, chemical structure, and hydrophobic/hydrophilic nature. Wettability, resistance to dye desorption, and spectral variations of sensitized photoanodes, along with the photovoltaic performance of the resulting devices, are systematically investigated to identify some useful guidelines to choose and design suitable dyes of different colors for truly aqueous DSSCs.

70 citations

Journal ArticleDOI
TL;DR: In this paper, solid-state dye-sensitized solar cells (ssDSCs) were investigated using an organic D−π-A dye, coded Y123, and 2,2′,7, 7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene as a hole-transport material, exhibiting 934 mV open-circuit potential and 6.9% efficiency at standard solar conditions (AM1.5G,
Abstract: In solid-state dye-sensitized solar cells (ssDSCs), the poor pore filling of the mesoporous semiconductor and the short diffusion length of charge carriers in the hole-transport material (HTM) have limited the mesoscopic titania layer to a thickness of 2–3 μm. To increase the amount of light harvested by ssDSCs, organic dyes with high molar extinction coefficients are of great importance and have been the focus of intensive research. Here we investigate ssDSCs using an organic D−π–A dye, coded Y123, and 2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenylamine)-9,9′-spirobifluorene as a hole-transport material, exhibiting 934 mV open-circuit potential and 6.9% efficiency at standard solar conditions (AM1.5G, 100 mW cm–2), which is a significant improvement compared to the analogue dyes C218, C220, and JK2 (Voc values of 795, 781, and 914 mV, respectively). An upward shift in the conduction band edge was observed from photovoltage transient decay and impedance spectroscopy measurements for devices sensitized with Y12...

69 citations

Journal ArticleDOI
TL;DR: In this paper, the effect of exposure temperature and that of post-exposure thermal annealing on CO vibrational bands suggest that the multicaronyl species transform progressively to monocarbonyl forms which are in turn identified as precursors to the methylene groups in the presence of hydrogen.

69 citations

Journal ArticleDOI
TL;DR: A simple one-step heat treatment of peroxotitanate complex aqueous solution at around 100 degrees C was resulted in the formation of ellipsoidal anatase TiO2 nanoparticles having a high aspect ratio with no branches as discussed by the authors.

69 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Journal ArticleDOI
24 Oct 1991-Nature
TL;DR: In this article, the authors describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency.
Abstract: THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.

26,457 citations

28 Jul 2005
TL;DR: PfPMP1)与感染红细胞、树突状组胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作�ly.
Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1(PfPMP1)与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用,在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员,通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

18,940 citations

Journal ArticleDOI
TL;DR: The slow pace of hazardous waste remediation at military installations around the world is causing a serious delay in conversion of many of these facilities to civilian uses as discussed by the authors, which is a serious problem.
Abstract: The civilian, commercial, and defense sectors of most advanced industrialized nations are faced with a tremendous set of environmental problems related to the remediation of hazardous wastes, contaminated groundwaters, and the control of toxic air contaminants. For example, the slow pace of hazardous waste remediation at military installations around the world is causing a serious delay in conversion of many of these facilities to civilian uses. Over the last 10 years problems related to hazardous waste remediation have emerged as a high national and international priority.

17,188 citations