Michael Grätzel

Bio: Michael Grätzel is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Dye-sensitized solar cell & Perovskite (structure). The author has an hindex of 248, co-authored 1423 publications receiving 303599 citations. Previous affiliations of Michael Grätzel include University of California, Berkeley & Siemens Energy Sector.

Enhanced-Light-Harvesting Amphiphilic Ruthenium Dye for Efficient Solid-State Dye-Sensitized Solar Cells

Abstract: A ruthenium sensitizer (coded C101, NaRu (4,4'-bis(5-hexylthiophen-2-yl)-2,2'-bipyridine) (4-carboxylic acid-4'-caboxylate-2,2'-bipyridine) (NCS)(2)) containing a hexylthiophene-conjugated bipyridyl group as an ancillary ligand is presented for use in solid-state dye-sensitized solar cells (SSDSCs). The high molar. extinction coefficient of this dye is advantageous compared to the widely used Z907 dye, (NaRu (4-carboxylic acid-4'-carboxylate) (4,4'-dinonyl-2,2'-bipyridine) (NCS)(2)). In combination with an organic hole-transporting material (spiro-MeOTAD, 2,2',7,7'-tetrakis-(N,N-di-p-methoxyphenylamine) 9, 9'-spirobifluorene), the C101 sensitizer exhibits an excellent power-conversion efficiency of 4.5% under AM 1.5 solar (100 mW cm(-2)) irradiation in a SSDSC. From electronic-absorption, transient-photovoltage-decay, and impedance measurements it is inferred that extending the pi-conjugation of spectator ligands induces an enhanced light harvesting and retards the charge recombination, thus favoring the photovoltaic performance of a SSDSC.,

Nanostructured Composite Films for Dye-Sensitized Solar Cells by Electrostatic Layer-by-Layer Deposition

Abstract: Novel nanostructured TiO2 films for use in dye-sensitized solar cells were fabricated using the electrostatic layer-by-layer (ELBL) deposition method. Solar energy conversion efficiency over 5% was achieved with a 1.5 μm nanoparticulate film plus a scattering layer. Layered architectures incorporating scattering particles or nanorods into nanoparticulate films were also produced.

Mechanoperovskites for Photovoltaic Applications: Preparation, Characterization, and Device Fabrication.

Abstract: Hybrid organic-inorganic metal halide perovskites (MHPs) have emerged as excellent absorber materials for next generation solar cells owing to their simple solution-processed synthesis and high efficiency. This breakthrough in photovoltaics along with an accompanying impact in light-emitting applications prompted a renaissance of interest in the broad family of MHPs. Notably, the optoelectronic properties and the photovoltaic parameters of MHPs are highly sensitive to the adopted synthetic strategy. The preparation of MHPs has commonly relied on solution-based methods requiring elevated temperatures for homogeneity of reaction mixtures. While the solution-based approach is relatively versatile, it faces challenges such as limitations in compositional engineering of MHPs or their long-term storage among others. Therefore, there is a continuous great challenge to develop efficient synthetic strategies affording various high-quality MHP materials for numerous technological optoelectronic applications. In the past decade, mechanochemistry has appeared as a green alternative to traditional synthesis. This solid-state, re-emerging efficient synthetic methodology mediated by direct absorption of mechanical energy is growing explosively across organic and inorganic chemistry and materials science. In this Account, we describe our shared interest in the productive use of mechanical force in chemistry of MHPs, as well as assembly of the respective solar cell devices. We highlight the milestones achieved by our groups along with the seminal contributions by other groups. In particular, we demonstrate that mechanochemistry efficiently allows the formation of various phase pure hybrid lead and lead-free halide perovskite compositions (called hereafter "mechanoperovskites"). The progress in solvent-free solid-state synthesis is greatly enhanced by the integration of advanced methods of solid-state analysis like powder X-ray diffraction (pXRD), solid-state nuclear magnetic resonance (ss-NMR) and UV-vis spectroscopies, and we aim to illustrate this ongoing integration through appropriate examples. Furthermore, we show that thin films based on mechanoperovskites have the advantage of providing a higher degree of control of the stoichiometry and higher reproducibility, stability, and material phase purity. The impact of using powdered mechanoperovskite as a precursor for thin film formation on the electrochemical and photovoltaic properties of the solar cells is also discussed. Finally, our view of current challenges and future directions in this emerging interdisciplinary area of research is provided.

Light-induced hydrogen formation and photo-uptake of oxygen in colloidal suspensions of α-Fe2O3

Abstract: Hydrogen evolution and oxygen reduction as a function of pH of the electrolyte have been investigated for α-Fe2O3 powders and colloids by means of a solar simulator. The discrete particle dimensions and surface dynamics of iron oxide seem to be the dominant factors leading to H2 generation despite the unfavourable position of the conduction band in Fe2O3. Evidence is presented that photo-uptake of O2 occurs in α-Fe2O3 suspensions.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films

Abstract: THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Environmental Applications of Semiconductor Photocatalysis

Abstract: The civilian, commercial, and defense sectors of most advanced industrialized nations are faced with a tremendous set of environmental problems related to the remediation of hazardous wastes, contaminated groundwaters, and the control of toxic air contaminants. For example, the slow pace of hazardous waste remediation at military installations around the world is causing a serious delay in conversion of many of these facilities to civilian uses. Over the last 10 years problems related to hazardous waste remediation have emerged as a high national and international priority.