Michael Grätzel

Bio: Michael Grätzel is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Dye-sensitized solar cell & Perovskite (structure). The author has an hindex of 248, co-authored 1423 publications receiving 303599 citations. Previous affiliations of Michael Grätzel include University of California, Berkeley & Siemens Energy Sector.

A New 1,3,4‐Oxadiazole‐Based Hole‐Transport Material for Efficient CH3NH3PbBr3 Perovskite Solar Cells

Abstract: A new hole-transport material (HTM) based on the 1,3,4-oxadiazole moiety (H1) was prepared through a single-step synthetic pathway starting from commercially available products. Thanks to a deep HOMO level, H1 was used as HTM in CH3 NH3 PbBr3 perovskite solar cells yielding an efficiency of 5.8%. The reference HTM (Spiro-OMeTAD), under the same testing conditions, furnished a lower efficiency of 5.1%. Steady-state and time-resolved photoluminescence of the thin films showed good charge-extraction dynamics for H1 devices. In addition, H1 shows a large thermal stability and completely amorphous behavior (as evaluated by thermal gravimetric analysis and differential scanning calorimetry).

Influence of Structural Variations in Push–Pull Zinc Porphyrins on Photovoltaic Performance of Dye‐Sensitized Solar Cells

Abstract: We designed and synthesized two new zinc porphyrin dyes for dye-sensitized solar cells (DSCs). Subtle molecular structural variation in the dyes significantly influenced the performance of the DSC devices. By utilizing these dyes in combination with a cobalt-based redox electrolyte using a photoanode made of mesoporous TiO2, we achieved a power conversion efficiency (PCE) of up to 12.0% under AM1.5G (100mWcm(-2)) simulated solar light. Moreover, we obtained a high PCE of 6.4% for solid-state dye-sensitized solar cells by using 2,2,7,7-tetrakis-(N,N-di-p-methoxyphenylamine)-9,9-spirobifluorene as a hole-transporting material.

Hill climbing hysteresis of perovskite-based solar cells: a maximum power point tracking investigation

Abstract: The surge of the power conversion efficiency of metal halide lead perovskite solar cells comes with concerns, such as the long-term ecotoxicity of lead compounds, their sensitivity toward moisture and oxygen, or the scarcity of some of their components. Most perovskite solar cells still suffer from serious stability problems when measured under real working conditions (maximum power point tracking at 60°C). In the long run, stability will certainly decide on the fate of CH3NH3PbI3 and related lead perovskites for their use in photovoltaic modules. Herein, we show an effective and inexpensive strategy to perform ageing of perovskite solar cells under maximum power point tracking. For the first time, we analyze the issue of power extraction from solar cells exhibiting hysteresis. We show that a standard tracking algorithm such as perturb and observe fails to converge to the maximum power point of the solar cell if it exhibits j(V) hysteresis, and we present an effective strategy to stabilize the algorithm. We show that enforcing oscillations in forward bias can boost the mean power output of some perovskite solar cells by more than 10%, in contrast to a reference crystalline silicon solar cell. Copyright © 2017 John Wiley & Sons, Ltd.

Visible light-induced oxygen generation and cyclic water cleavage sensitized by porphyrins

Abstract: Reference LPI-ARTICLE-1981-002doi:10.1002/hlca.19810640626View record in Web of Science Record created on 2006-02-21, modified on 2017-05-12

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films

Abstract: THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Environmental Applications of Semiconductor Photocatalysis

Abstract: The civilian, commercial, and defense sectors of most advanced industrialized nations are faced with a tremendous set of environmental problems related to the remediation of hazardous wastes, contaminated groundwaters, and the control of toxic air contaminants. For example, the slow pace of hazardous waste remediation at military installations around the world is causing a serious delay in conversion of many of these facilities to civilian uses. Over the last 10 years problems related to hazardous waste remediation have emerged as a high national and international priority.