Michael Grätzel

Bio: Michael Grätzel is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Dye-sensitized solar cell & Perovskite (structure). The author has an hindex of 248, co-authored 1423 publications receiving 303599 citations. Previous affiliations of Michael Grätzel include University of California, Berkeley & Siemens Energy Sector.

High-performance dye-sensitized solar cells based on solvent-free electrolytes produced from eutectic melts

Abstract: The presence of organic solvents in solar cells has hindered the application of devices, especially in flexible cells. Now, by mixing three solid salts, a solvent-free liquid electrolyte for dye-sensitized solar cells has been discovered that shows both excellent efficiency and stability. Low-cost excitonic solar cells based on organic optoelectronic materials are receiving an ever-increasing amount of attention as potential alternatives to traditional inorganic photovoltaic devices. In this rapidly developing field, the dye-sensitized solar cell1 (DSC) has achieved so far the highest validated efficiency of 11.1% (ref. 2) and remarkable stability3. However, the cells with the best performance use volatile solvents in their electrolytes, which may be prohibitive for outdoor solar panels in view of the need for robust encapsulation. Solvent-free room-temperature ionic liquids4,5,6,7,8,9,10,11 have been pursued as an attractive solution to this dilemma, and device efficiencies of over 7% were achieved by using some low-viscosity formulations containing 1-ethyl-3-methylimidazolium thiocyanate8, selenocyanate9, tricyanomethide10 or tetracyanoborate11. Unfortunately, apart from tetracyanoborate, all of these low-viscosity melts proved to be unstable under prolonged thermal stress and light soaking. Here, we introduce the concept of using eutectic melts to produce solvent-free liquid redox electrolytes. Using a ternary melt in conjunction with a nanocrystalline titania film and the amphiphilic heteroleptic ruthenium complex Z907Na (ref. 10) as a sensitizer, we reach excellent stability and an unprecedented efficiency of 8.2% under air-mass 1.5 global illumination. Our results are of importance to realize large-scale outdoor applications of mesoscopic DSCs.

Influence of Feature Size, Film Thickness, and Silicon Doping on the Performance of Nanostructured Hematite Photoanodes for Solar Water Splitting

Abstract: Photoanodes consisting of nanostructured hematite prepared by atmospheric pressure chemical vapor deposition (APCVD) have previously set a benchmark for solar water splitting. Here, we fully investigate this promising system by varying critical synthetic parameters and probing the photoanode performance to determine the major factors that influence operation. By varying the film thickness, we show film growth to be linear with an incubation time. We find no concern with electron transport for films up to 600 nm, but a higher recombination rate of photogenerated carriers in the hematite near the interface with the fluorine-doped tin oxide, as compared to the bulk section of the film. The mechanism for the formation of the thin film’s nanoporous dendritic structure is discussed on the basis of the results from varying the substrate growth temperate. The observed feature sizes of the film are found to depend strongly on this temperature and the presence of silicon dopant precursor (TEOS). Raman and Mossbauer...

Photo-assisted electrodeposition of cobalt–phosphate (Co–Pi) catalyst on hematite photoanodes for solar water oxidation

Abstract: A photo-assisted electrodeposition approach was used to deposit a cobalt–phosphate water oxidation catalyst (“Co–Pi”) onto recently improved dendritic mesostructures of α-Fe2O3. A comparison between this approach, electrodeposition of Co–Pi, and Co2+ wet impregnation showed that photo-assisted electrodeposition of Co–Pi yields superior α-Fe2O3 photoanodes for photoelectrochemical water oxidation. Stable photocurrent densities of 1.0 mA cm−2 at 1.0 V and 2.8 mA cm−2 at 1.23 V vs. RHE measured under standard illumination and basic conditions were achieved. By allowing deposition only where visible light generates oxidizing equivalents, photo-assisted electrodeposition provides a more uniform distribution of Co–Pi onto α-Fe2O3 than obtained by electrodeposition. This approach of fabricating catalyst-modified metal-oxide photoelectrodes may be attractive for optimization in conjunction with tandem or hybrid photoelectrochemical cells.

A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules

Abstract: A new deposition method for solar-panel polycrystalline perovskite thin films enables the production of large-area uniform films and avoids the need for common solvents or vacuum. Hybrid inorganic–organic perovskites are the most likely materials to replace silicon as absorber layers for solar cells, but issues with stability and scaling-up thin films mean that large-scale production is not yet possible. Liyuan Han and colleagues have developed a new deposition method for polycrystalline thin films that does not rely on spin- or drip-coating precursors in solvent or on vacuum deposition, and is therefore more amenable to larger-area films than are previous techniques. The procedure uses gaseous precursors and application of pressure, and has enabled a device with an area of 36 square centimetres to be certified at 12.1 per cent power conversion efficiency. Recent advances in the use of organic–inorganic hybrid perovskites for optoelectronics have been rapid, with reported power conversion efficiencies of up to 22 per cent for perovskite solar cells1,2,3,4,5,6,7,8,9. Improvements in stability have also enabled testing over a timescale of thousands of hours10,11,12,13,14. However, large-scale deployment of such cells will also require the ability to produce large-area, uniformly high-quality perovskite films. A key challenge is to overcome the substantial reduction in power conversion efficiency when a small device is scaled up: a reduction from over 20 per cent to about 10 per cent is found15,16,17,18,19,20,21 when a common aperture area of about 0.1 square centimetres is increased to more than 25 square centimetres. Here we report a new deposition route for methyl ammonium lead halide perovskite films that does not rely on use of a common solvent1,2,4,5,6,7,8,9,10,11,12,13,14,15 or vacuum3: rather, it relies on the rapid conversion of amine complex precursors to perovskite films, followed by a pressure application step. The deposited perovskite films were free of pin-holes and highly uniform. Importantly, the new deposition approach can be performed in air at low temperatures, facilitating fabrication of large-area perovskite devices. We reached a certified power conversion efficiency of 12.1 per cent with an aperture area of 36.1 square centimetres for a mesoporous TiO2-based perovskite solar module architecture.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films

Abstract: THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Environmental Applications of Semiconductor Photocatalysis

Abstract: The civilian, commercial, and defense sectors of most advanced industrialized nations are faced with a tremendous set of environmental problems related to the remediation of hazardous wastes, contaminated groundwaters, and the control of toxic air contaminants. For example, the slow pace of hazardous waste remediation at military installations around the world is causing a serious delay in conversion of many of these facilities to civilian uses. Over the last 10 years problems related to hazardous waste remediation have emerged as a high national and international priority.