scispace - formally typeset
Search or ask a question
Author

Michael J. Weaver

Bio: Michael J. Weaver is an academic researcher from Purdue University. The author has contributed to research in topics: Infrared spectroscopy & Surface-enhanced Raman spectroscopy. The author has an hindex of 78, co-authored 371 publications receiving 19864 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, Boltammetry combined with singlepotential alteration infrared spectroscopy (SPAIRS) was used to study the extent of adsorbed CO produced at Pt, Ru and Pt-Ru alloy electrodes during methanol and formic acid oxidation in acidic supporting electrolyte.

466 citations

Journal ArticleDOI
19 Jun 2002-Langmuir
TL;DR: In this article, the voltammetric electrooxidation rates of formic acid, formaldehyde, and methanol in acidic electrolyte on carbon-supported platinum nanoparticle films with varying particle diameters (d) in the range of ca. 2−9 nm are examined with the objective of comparing the nanoparticle size sensitivity for these related yet distinct electrocatalytic processes.
Abstract: The voltammetric electrooxidation rates of formic acid, formaldehyde, and methanol in acidic electrolyte on carbon-supported platinum nanoparticle films with varying particle diameters (d) in the range of ca. 2−9 nm are examined with the objective of comparing the nanoparticle size sensitivity for these related yet distinct electrocatalytic processes. The reaction rates on the larger nanoparticles (d > 4 nm) are similar to those observed on polycrystalline Pt when normalized to the same microscopic Pt surface area. As noted previously, the rates of methanol electrooxidation decrease for Pt nanoparticle diameters below 4 nm. However, formic acid electrooxidation exhibits the opposite behavior, with rates increasing markedly for d < 4 nm, while formaldehyde electrooxidation displays little sensitivity to the Pt nanoparticle size. However, the extent of chemisorbed CO formation from all three reactants, as deduced from voltammetric and infrared spectral data, diminishes with decreasing d, the CO coverages fo...

385 citations

Journal ArticleDOI
TL;DR: In this article, the spatial structure of compressed carbon monoxide adlayers on Pt(111) in aqueous acidic solution has been explored by means of in-situ scanning tunneling microscopy (STM) along with IRAS.
Abstract: The spatial structure of compressed carbon monoxide adlayers on Pt(111) in aqueous acidic solution has been explored by means of in‐situ scanning tunneling microscopy (STM) along with infrared reflection–absorption spectroscopy (IRAS). Besides offering a detailed structural picture of this electrochemical interface in comparison with the well‐studied Pt(111)/CO system in ultrahigh vacuum (uhv) environments, the real‐space structural information provided by STM allows an assessment of the obfuscating influence of dynamic dipole coupling upon IRAS binding‐site assignments. In turn, the latter data provide an important crosscheck on the validity of binding‐site assignments deduced from the STM images. Emphasis is placed on the structures formed from near‐saturated CO solutions, encouraged by the electrode potential‐induced adlayer phase transition at ca. 0 V vs SCE observed previously under these conditions by IRAS. At potentials below 0 V, a hexagonal close‐packed (2×2)–3CO adlayer is observed, with a CO co...

372 citations

Journal ArticleDOI
TL;DR: In this article, the inner-shell (i.e., bond distortional) barriers for the metallocene and arene couples were calculated from bond distance and vibrational data to be small (< or approx, 0.25 kcal/mol).
Abstract: : Electrochemical Rate Constants and Activation Parameters are reported for the electron exchange of five metallocene couples and dibenzenechromium (I)/ (O) in eight solvents at mercury electrodes. The solvents (acetonitrile, acetone, methylene chloride, formamide, N-methylformamide, N,N'- dimethylformamide, dimethylsulfoxide, and benzonitrile) were chosen so to provide substantial variations in their dynamical as well as dielectric properties. The metallocene couples are of the form M(Cp)2(+/o), where M = Fe, Co, or Mn, and Cp = cyclopentadiene or pentamethylcyclopentadiene. The inner- shell (i.e., bond distortional) barriers are calculated for the metallocene and arene couples from bond-distance and vibrational data to be small (< or approx, 0.25 kcal/mol) yet metal-dependent. Detailed comparisons of the observed solvent-dependent kinetics are made with the rate parameters calculated from contemporary theoretical treatments of outer-sphere electron transfer. Considerably better agreement between the experimental and theoretical kinetic parameters was obtained when the latter take into account the influence of solvent friction upon the barrier-crossing frequency. These results indicate that the conventional transition-state theory may not apply to electron-transfer reactions where the free-energy barrier is due chiefly to solvent reorganization, at least in 'high friction' media where concerted solvent relaxation is slow.

323 citations

Journal ArticleDOI
TL;DR: In this paper, surface-enhanced Raman spectra for benzene, toluene, and benzonitrile adsorbed at gold-aqueous interfaces and on gold in vacuum at 20 K were analyzed in terms of previously proposed surface selection rules.
Abstract: Surface-enhanced Raman spectra for benzene, toluene, and benzonitrile adsorbed at gold-aqueous interfaces and on gold in vacuum at 20 K are analyzed in terms of previously proposed surface selection rules. The electrochemical adsorbate systems are of particular interest in this regard since independent information on the surface binding geometries have been obtained previously from alterations in the band frequency and band shape upon adsorption and from dipole-dipole coupling, thereby providing a bona fide test of the surface selection rules

317 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: A review of gold nanoparticles can be found in this article, where the most stable metal nanoparticles, called gold colloids (AuNPs), have been used for catalysis and biology applications.
Abstract: Although gold is the subject of one of the most ancient themes of investigation in science, its renaissance now leads to an exponentially increasing number of publications, especially in the context of emerging nanoscience and nanotechnology with nanoparticles and self-assembled monolayers (SAMs). We will limit the present review to gold nanoparticles (AuNPs), also called gold colloids. AuNPs are the most stable metal nanoparticles, and they present fascinating aspects such as their assembly of multiple types involving materials science, the behavior of the individual particles, size-related electronic, magnetic and optical properties (quantum size effect), and their applications to catalysis and biology. Their promises are in these fields as well as in the bottom-up approach of nanotechnology, and they will be key materials and building block in the 21st century. Whereas the extraction of gold started in the 5th millennium B.C. near Varna (Bulgaria) and reached 10 tons per year in Egypt around 1200-1300 B.C. when the marvelous statue of Touthankamon was constructed, it is probable that “soluble” gold appeared around the 5th or 4th century B.C. in Egypt and China. In antiquity, materials were used in an ecological sense for both aesthetic and curative purposes. Colloidal gold was used to make ruby glass 293 Chem. Rev. 2004, 104, 293−346

11,752 citations

Journal ArticleDOI
TL;DR: Monolayers of alkanethiolates on gold are probably the most studied SAMs to date and offer the needed design flexibility, both at the individual molecular and at the material levels, and offer a vehicle for investigation of specific interactions at interfaces, and of the effect of increasing molecular complexity on the structure and stability of two-dimensional assemblies.
Abstract: The field of self-assembled monolayers (SAMs) has witnessed tremendous growth in synthetic sophistication and depth of characterization over the past 15 years.1 However, it is interesting to comment on the modest beginning and on important milestones. The field really began much earlier than is now recognized. In 1946 Zisman published the preparation of a monomolecular layer by adsorption (self-assembly) of a surfactant onto a clean metal surface.2 At that time, the potential of self-assembly was not recognized, and this publication initiated only a limited level of interest. Early work initiated in Kuhn’s laboratory at Gottingen, applying many years of experience in using chlorosilane derivative to hydrophobize glass, was followed by the more recent discovery, when Nuzzo and Allara showed that SAMs of alkanethiolates on gold can be prepared by adsorption of di-n-alkyl disulfides from dilute solutions.3 Getting away from the moisture-sensitive alkyl trichlorosilanes, as well as working with crystalline gold surfaces, were two important reasons for the success of these SAMs. Many self-assembly systems have since been investigated, but monolayers of alkanethiolates on gold are probably the most studied SAMs to date. The formation of monolayers by self-assembly of surfactant molecules at surfaces is one example of the general phenomena of self-assembly. In nature, self-assembly results in supermolecular hierarchical organizations of interlocking components that provides very complex systems.4 SAMs offer unique opportunities to increase fundamental understanding of self-organization, structure-property relationships, and interfacial phenomena. The ability to tailor both head and tail groups of the constituent molecules makes SAMs excellent systems for a more fundamental understanding of phenomena affected by competing intermolecular, molecular-substrates and molecule-solvent interactions like ordering and growth, wetting, adhesion, lubrication, and corrosion. That SAMs are well-defined and accessible makes them good model systems for studies of physical chemistry and statistical physics in two dimensions, and the crossover to three dimensions. SAMs provide the needed design flexibility, both at the individual molecular and at the material levels, and offer a vehicle for investigation of specific interactions at interfaces, and of the effect of increasing molecular complexity on the structure and stability of two-dimensional assemblies. These studies may eventually produce the design capabilities needed for assemblies of three-dimensional structures.5 However, this will require studies of more complex systems and the combination of what has been learned from SAMs with macromolecular science. The exponential growth in SAM research is a demonstration of the changes chemistry as a disciAbraham Ulman was born in Haifa, Israel, in 1946. He studied chemistry in the Bar-Ilan University in Ramat-Gan, Israel, and received his B.Sc. in 1969. He received his M.Sc. in phosphorus chemistry from Bar-Ilan University in 1971. After a brief period in industry, he moved to the Weizmann Institute in Rehovot, Israel, and received his Ph.D. in 1978 for work on heterosubstituted porphyrins. He then spent two years at Northwestern University in Evanston, IL, where his main interest was onedimensional organic conductors. In 1985 he joined the Corporate Research Laboratories of Eastman Kodak Company, in Rochester, NY, where his research interests were molecular design of materials for nonlinear optics and self-assembled monolayers. In 1994 he moved to Polytechnic University where he is the Alstadt-Lord-Mark Professor of Chemistry. His interests encompass self-assembled monolayers, surface engineering, polymers at interface, and surfaces phenomena. 1533 Chem. Rev. 1996, 96, 1533−1554

7,465 citations

Journal ArticleDOI
TL;DR: In this paper, the electron transfer reactions between ions and molecules in solution have been the subject of considerable experimental study during the past three decades, including charge transfer, photoelectric emission spectra, chemiluminescent electron transfer, and electron transfer through frozen media.

7,155 citations

Journal ArticleDOI
TL;DR: In this paper, the authors report, extend, and interpret much of our current understanding relating to theories of noise-activated escape, for which many of the notable contributions are originating from the communities both of physics and of physical chemistry.
Abstract: The calculation of rate coefficients is a discipline of nonlinear science of importance to much of physics, chemistry, engineering, and biology. Fifty years after Kramers' seminal paper on thermally activated barrier crossing, the authors report, extend, and interpret much of our current understanding relating to theories of noise-activated escape, for which many of the notable contributions are originating from the communities both of physics and of physical chemistry. Theoretical as well as numerical approaches are discussed for single- and many-dimensional metastable systems (including fields) in gases and condensed phases. The role of many-dimensional transition-state theory is contrasted with Kramers' reaction-rate theory for moderate-to-strong friction; the authors emphasize the physical situation and the close connection between unimolecular rate theory and Kramers' work for weakly damped systems. The rate theory accounting for memory friction is presented, together with a unifying theoretical approach which covers the whole regime of weak-to-moderate-to-strong friction on the same basis (turnover theory). The peculiarities of noise-activated escape in a variety of physically different metastable potential configurations is elucidated in terms of the mean-first-passage-time technique. Moreover, the role and the complexity of escape in driven systems exhibiting possibly multiple, metastable stationary nonequilibrium states is identified. At lower temperatures, quantum tunneling effects start to dominate the rate mechanism. The early quantum approaches as well as the latest quantum versions of Kramers' theory are discussed, thereby providing a description of dissipative escape events at all temperatures. In addition, an attempt is made to discuss prominent experimental work as it relates to Kramers' reaction-rate theory and to indicate the most important areas for future research in theory and experiment.

5,180 citations

Journal ArticleDOI
TL;DR: A comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals, including a brief introduction to nucleation and growth within the context of metal Nanocrystal synthesis, followed by a discussion of the possible shapes that aMetal nanocrystal might take under different conditions.
Abstract: Nanocrystals are fundamental to modern science and technology. Mastery over the shape of a nanocrystal enables control of its properties and enhancement of its usefulness for a given application. Our aim is to present a comprehensive review of current research activities that center on the shape-controlled synthesis of metal nanocrystals. We begin with a brief introduction to nucleation and growth within the context of metal nanocrystal synthesis, followed by a discussion of the possible shapes that a metal nanocrystal might take under different conditions. We then focus on a variety of experimental parameters that have been explored to manipulate the nucleation and growth of metal nanocrystals in solution-phase syntheses in an effort to generate specific shapes. We then elaborate on these approaches by selecting examples in which there is already reasonable understanding for the observed shape control or at least the protocols have proven to be reproducible and controllable. Finally, we highlight a number of applications that have been enabled and/or enhanced by the shape-controlled synthesis of metal nanocrystals. We conclude this article with personal perspectives on the directions toward which future research in this field might take.

4,927 citations