Michael P. Hughes

Bio: Michael P. Hughes is an academic researcher from University of Surrey. The author has contributed to research in topics: Dielectrophoresis & Particle. The author has an hindex of 36, co-authored 139 publications receiving 4969 citations. Previous affiliations of Michael P. Hughes include Bangor University & University of Glasgow.

Strategies for dielectrophoretic separation in laboratory-on-a-chip systems.

Abstract: Dielectrophoresis--the induced motion of polarizable particles in nonuniform fields--has proven to be an effective method for the separation of bioparticles such as cells, viruses and proteins. In this paper, the application of dielectrophoresis in miniaturized laboratories-on-a-chip is discussed, and strategies are described for using dielectrophoresis both for the binary separation of bioparticles and for the fractionation of many populations in such devices.

AC electrokinetics: applications for nanotechnology

Abstract: The phenomena of dielectrophoresis and electrorotation, collectively referred to as AC electrokinetics, have been used for many years to study, manipulate and separate particles on the cellular (1 µm or more) scale. However, the technique has much to offer the expanding field of nanotechnology, that is the precise manipulation of particles on the nanometre scale. In this paper we present the principles of AC electrokinetics for particle manipulation, review the current state of AC electrokinetic techniques for the manipulation of particles on the nanometre scale, and consider how these principles may be applied to nanotechnology.

Nanoelectromechanics in engineering and biology

Abstract: The field of nanotechnology is inherently multidisciplinary-in its principles, in its techniques, and in its applications-and meeting its current and future challenges will require the kind of approach reflected in this book.

Microfluidic diagnostic technologies for global public health

Abstract: The developing world does not have access to many of the best medical diagnostic technologies; they were designed for air-conditioned laboratories, refrigerated storage of chemicals, a constant supply of calibrators and reagents, stable electrical power, highly trained personnel and rapid transportation of samples. Microfluidic systems allow miniaturization and integration of complex functions, which could move sophisticated diagnostic tools out of the developed-world laboratory. These systems must be inexpensive, but also accurate, reliable, rugged and well suited to the medical and social contexts of the developing world.

Production of a tissue-like structure by contraction of collagen lattices by human fibroblasts of different proliferative

Abstract: Fibroblasts can condense a hydrated collagen lattice to a tissue-like structure 1/28th the area of the starting gel in 24 hr. The rate of the process can be regulated by varying the protein content of the lattice, the cell number, or the con- centration of an inhibitor such as Colcemid. Fibroblasts of high population doubling level propagated in vitro, which have left the cell cycle, can carry out the contraction at least as efficiently as cycling cells. The potential uses of the system as an immu- nologically tolerated "tissue" for wound hea ing and as a model for studying fibroblast function are discussed.

Transport phenomena in nanofluidics

Abstract: This thesis explores transport phenomena in nanochannels on a chip. Fundamental nanofluidic ionic studies form the basis for novel separation and preconcentration applications for proteomic purposes. The measurements were performed with 50-nm-high 1D nanochannels, which are easily accessible from both sides by two microchannels. Nanometer characteristic apertures were manufactured in the bonded structure of Pyrex-amorphous silicon – Pyrex, in which the thickness of the amorphous silicon layer serves as a spacer to define the height of the nanochannels. The geometry of the nanometer-sized apertures is well defined, which simplifies the modeling of the transport across them. Compared to biological pores, the present nanochannels in Pyrex offer increased stability. Fundamental characteristics of nanometer-sized apertures were obtained by impedance spectroscopy measurements of the nanochannel at different ionic strengths and pH values. A conductance plateau (on a log-log scale) was modeled and measured, establishing due to the dominance of the surface charge density in the nanochannels, which induces an excess of mobile counterions to maintain electroneutrality. The nanochannel conductance can be regulated at low ionic strengths by pH adjustment, and by an external voltage applied on the chip to change the zeta potential. This field-effect allows the regulation of ionic flow which can be exploited for the fabrication of nanofluidic devices. Fluorescence measurements confirm that 50-nm-high nanochannels show an exclusion of co-ions and an enrichment of counterions at low ionic strengths. This permselectivity is related to the increasing thickness of the electrical double layer (EDL) with decreasing salt concentrations, which results in an EDL overlap in an aperture if the height of the nanochannel and the thickness of the EDL are comparable in size. The diffusive transport of charged species and therefore the exclusion-enrichment effect was described with a simple model based on the Poisson-Boltzmann equation. The negatively charged Pyrex surface of the nanometer characteristic apertures can be inversed with chemical surface pretreatments, resulting in an exclusion of cations and an enrichment of anions. When a pressure gradient is applied across the nanochannels, charged molecules are electrostatically rejected at the entrance of the nanometer-sized apertures, which can be used for separation processes. Proteomic applications are presented such as the separation and preconcentration of proteins. The diffusion of Lectin proteins with different isoelectric points and very similar compositions were controlled by regulating the pH value of the buffer. When the proteins are neutral at their pI value, the diffusion coefficient is maximal because the biomolecules does not interact electrostatically with the charged surfaces of the nanochannel. This led to a fast separation of three Lectin proteins across the nanochannel. The pI values measured in this experiment are slightly shifted compared to the values obtained with isoelectric focusing because of reversible adsorption of proteins on the walls which affects the pH value in the nanochannel. An important application in the proteomic field is the preconcentration of biomolecules. By applying an electric field across the nanochannel, anionic and cationic analytes were preconcentrated on the cathodic side of the nanometer-sized aperture whereas on the anodic side depletion of ions was observed. This is due to concentration polarization, a complex of effects related to the formation of ionic concentration gradients in the electrolyte solution adjacent to an ion-selective interface. It was measured that the preconcentration factor increased with the net charge of the molecule, leading to a preconcentration factor of > 600 for rGFP proteins in 9 minutes. Such preconcentrations are important in micro total analysis systems to achieve increased detection signals of analytes contained in dilute solutions. Compared to cylindrical pores, our fabrication process allows the realization of nanochannels on a chip in which the exclusion-enrichment effect and a big flux across the nanometer-sized aperture can be achieved, showing the interest for possible micro total analysis system applications. The described exclusion-enrichment effect as well as concentration polarization play an important role in transport phenomena in nanofluidics. The appendix includes preliminary investigations in DNA molecule separation and fluorescence correlation spectroscopy measurements, which allows investigating the behavior of molecules in the nanochannel itself.

Separation of Metallic from Semiconducting Single-Walled Carbon Nanotubes

Abstract: We have developed a method to separate metallic from semiconducting single-walled carbon nanotubes from suspension using alternating current dielectrophoresis. Our method takes advantage of the difference of the relative dielectric constants of the two species with respect to the solvent, resulting in an opposite movement of metallic and semiconducting tubes along the electric field gradient. Metallic tubes are attracted toward a microelectrode array, leaving semiconducting tubes in the solvent. Proof of the effectiveness of separation is given by a comparative Raman spectroscopy study on the dielectrophoretically deposited tubes and on a reference sample.