Michael S. Arnold

Bio: Michael S. Arnold is an academic researcher from University of Wisconsin-Madison. The author has contributed to research in topics: Carbon nanotube & Graphene. The author has an hindex of 46, co-authored 180 publications receiving 12014 citations. Previous affiliations of Michael S. Arnold include Office of Technology Transfer & Northwestern University.

Sorting carbon nanotubes by electronic structure using density differentiation

Abstract: The heterogeneity of as-synthesized single-walled carbon nanotubes (SWNTs) precludes their widespread application in electronics, optics and sensing. We report on the sorting of carbon nanotubes by diameter, bandgap and electronic type using structure-discriminating surfactants to engineer subtle differences in their buoyant densities. Using the scalable technique of density-gradient ultracentrifugation, we have isolated narrow distributions of SWNTs in which >97% are within a 0.02-nm-diameter range. Furthermore, using competing mixtures of surfactants, we have produced bulk quantities of SWNTs of predominantly a single electronic type. These materials were used to fabricate thin-film electrical devices of networked SWNTs characterized by either metallic or semiconducting behaviour.

Engineering Carbon Nanotubes and Nanotube Circuits Using Electrical Breakdown

Abstract: Carbon nanotubes display either metallic or semiconducting properties. Both large, multiwalled nanotubes (MWNTs), with many concentric carbon shells, and bundles or “ropes” of aligned single-walled nanotubes (SWNTs), are complex composite conductors that incorporate many weakly coupled nanotubes that each have a different electronic structure. Here we demonstrate a simple and reliable method for selectively removing single carbon shells from MWNTs and SWNT ropes to tailor the properties of these composite nanotubes. We can remove shells of MWNTs stepwise and individually characterize the different shells. By choosing among the shells, we can convert a MWNT into either a metallic or a semiconducting conductor, as well as directly address the issue of multiple-shell transport. With SWNT ropes, similar selectivity allows us to generate entire arrays of nanoscale field-effect transistors based solely on the fraction of semiconducting SWNTs.

Field-Effect Transistors Based on Single Semiconducting Oxide Nanobelts

Abstract: We have fabricated field-effect transistors (FETs) based on single SnO2 and ZnO nanobelts of thicknesses between 10 and 30 nm. Switching ratios as large as 6 orders of magnitude and conductivities as high as 15 (Ω cm)-1 are observed. Annealing SnO2 nanobelt FETs in an oxygen-deficient atmosphere produces a negative shift in gate threshold voltage, indicating doping by the generation of surface oxygen vacancies. This treatment provides an effective way of tuning the electrical performance of the nanobelt devices. The ability of SnO2 FETs to act as gas sensors is also demonstrated. SnO2 FETs with lengths of about 500 nm or less show an anomalous behavior where the conductance cannot be modulated by the gate. ZnO nanobelt FETs are sensitive to ultraviolet light. Both photogeneration of electron−hole pairs and doping by UV induced surface desorption contribute to the conductivity.

Current Saturation and Electrical Breakdown in Multiwalled Carbon Nanotubes

Abstract: We investigate the limits of high energy transport in multiwalled carbon nanotubes (MWNTs). In contrast to metal wires, MWNTs do not fail in the continuous, accelerating manner typical of electromigration. Instead, they fail via a series of sharp, equally sized current steps. We assign these steps to the sequential destruction of individual nanotube shells, consistent with the MWNT's concentric-shell geometry. Furthermore, the initiation of this failure is very sensitive to air exposure. In air failure is initiated by oxidation at a particular power, whereas in vacuum MWNTs can withstand much higher power densities and reach their full current carrying capacities.

Enrichment of single-walled carbon nanotubes by diameter in density gradients.

Abstract: The bulk enrichment and separation of single-walled carbon nanotubes (SWNTs) by diameter has been achieved through ultracentrifugation of DNA-wrapped SWNTs in aqueous density gradients. The separation is identified by the visual formation of colored bands of SWNTs in the density range of 1.11−1.17 g cm-3. The optical absorbance spectra of the separated SWNTs indicate that SWNTs of decreasing diameter are increasingly more buoyant. This nondestructive and scalable separation strategy is expected to impact the fields of molecular electronics, optoelectronics, and sensing where SWNTs of a monodisperse band gap are essential.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

A comprehensive review of zno materials and devices

Abstract: The semiconductor ZnO has gained substantial interest in the research community in part because of its large exciton binding energy (60meV) which could lead to lasing action based on exciton recombination even above room temperature. Even though research focusing on ZnO goes back many decades, the renewed interest is fueled by availability of high-quality substrates and reports of p-type conduction and ferromagnetic behavior when doped with transitions metals, both of which remain controversial. It is this renewed interest in ZnO which forms the basis of this review. As mentioned already, ZnO is not new to the semiconductor field, with studies of its lattice parameter dating back to 1935 by Bunn [Proc. Phys. Soc. London 47, 836 (1935)], studies of its vibrational properties with Raman scattering in 1966 by Damen et al. [Phys. Rev. 142, 570 (1966)], detailed optical studies in 1954 by Mollwo [Z. Angew. Phys. 6, 257 (1954)], and its growth by chemical-vapor transport in 1970 by Galli and Coker [Appl. Phys. ...

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

Nanowire Nanosensors for Highly Sensitive and Selective Detection of Biological and Chemical Species

Abstract: Boron-doped silicon nanowires (SiNWs) were used to create highly sensitive, real-time electrically based sensors for biological and chemical species. Amine- and oxide-functionalized SiNWs exhibit pH-dependent conductance that was linear over a large dynamic range and could be understood in terms of the change in surface charge during protonation and deprotonation. Biotin-modified SiNWs were used to detect streptavidin down to at least a picomolar concentration range. In addition, antigen-functionalized SiNWs show reversible antibody binding and concentration-dependent detection in real time. Lastly, detection of the reversible binding of the metabolic indicator Ca2+ was demonstrated. The small size and capability of these semiconductor nanowires for sensitive, label-free, real-time detection of a wide range of chemical and biological species could be exploited in array-based screening and in vivo diagnostics.

Organic Thin Film Transistors for Large Area Electronics

Abstract: Organic thin-film transistors (OTFTs) have lived to see great improvements in recent years. This review presents new insight into conduction mechanisms and performance characteristics, as well as opportunities for modeling properties of OTFTs. The shifted focus in research from novel chemical structures to fabrication technologies that optimize morphology and structural order is underscored by chapters on vacuum-deposited and solution-processed organic semiconducting films. Finally, progress in the growing field of the n-type OTFTs is discussed in ample detail. The Figure, showing a pentacene film edge on SiO2, illustrates the morphology issue.