Mindaugas Mikutis

Bio: Mindaugas Mikutis is an academic researcher from Vilnius University. The author has contributed to research in topics: Femtosecond & Laser. The author has an hindex of 7, co-authored 16 publications receiving 436 citations.

High speed laser processing of transparent materials

Abstract: A method and system for laser pre-cutting a layered material (31) with a laser beam (14) is disclosed. The layered material (31) comprises at least one tensile stress layer (TSL), at least one compression stress layer (CSL1, CSL2), and at least one interface region (IR1, IR2) between the at least one tensile stress layer (TSL) and the at least one compression stress layer (CSL1, CSL2) and is transparent to allow propagation of the laser beam (14) through the layered material (31). The method may comprise setting an optical beam path (8) and a laser characteristic of the laser beam (14) such that an interaction of the laser beam (14) with the layered material (31) generates an elongate damage region (57) in the layered material (31), and, for each of a series of pre-cut positions (X N-1 , X N , X N+1 ) of the layered material (31), pre-cutting the layered material (31) by positioning the layered material (31) and the laser beam (14) with respect to each other and irradiating the laser beam (14) such that the respective elongate damage regions (57) extend across the at least one interface region (IR1, IR2).

High 90% efficiency Bragg gratings formed in fused silica by femtosecond Gauss-Bessel laser beams

Abstract: Direct laser write of volume Bragg gratings with diffraction efficiency (absolute) ∼90% is demonstrated using Gauss-Bessel laser beams in fused silica glass. Axial multiplexing of ∼ 90 μm long segments of modified optical material was demonstrated and thick Bragg gratings of aspect ratio depth/period ≈234 were achieved with period d = 1.5 μm. Typical fabrication scanning speeds were up to 50 mm/s for gratings with cross sections up to five millimeters made within 1 h time. Potential applications of high efficiency Bragg gratings in a low nonlinearity medium such as silica are discussed.

High-speed laser-assisted cutting of strong transparent materials using picosecond Bessel beams

Abstract: We report single-pass cutting of strong transparent glass materials of 700 μm thickness with a speed up to 270 mm/s using single-shot nanostructuring technique exploiting picosecond, zero-order Bessel beams at laser wavelength of 1030 nm. Particularly, we present results of a systematic study of cutting of tempered glass which has high resistance to thermal and mechanical shocks due to the inhomogeneous material properties along its thickness, and homogeneous glass that identify a unique focusing geometry and a finite pitch dependency, for which cutting with high quality and high reproducibility can be achieved. These results represent a significant advancement in the field of high-speed cutting of technologically important transparent materials.

Femtosecond laser processing – a new enabling technology

Abstract: Recent results in high-precision surface ablation, film removal, ripple formation are presented. Volume pro cessing via polymerization, marking, dicing, cutting, and drilling of semiconductor and dielectric materials are discussed. We focus on processes which can be carried out at a high throughput in the industrial environment or/and can deliver functionalities currently not amenable by competing technologies. Unique features of direct laser writing by femtosecond laser pulses are highlighted. Methodology for solutions of engineering tasks is presented. Namely, the laser irradiation parameters are selected on the basis of the required processing conditions for the material of a workpiece.

Ultrafast laser processing of materials: from science to industry

Abstract: Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific, technological and industrial potential. In ultrafast laser manufacturing, optical energy of tightly focused femtosecond or picosecond laser pulses can be delivered to precisely defined positions in the bulk of materials via two-/multi-photon excitation on a timescale much faster than thermal energy exchange between photoexcited electrons and lattice ions. Control of photo-ionization and thermal processes with the highest precision, inducing local photomodification in sub-100-nm-sized regions has been achieved. State-of-the-art ultrashort laser processing techniques exploit high 0.1–1 μm spatial resolution and almost unrestricted three-dimensional structuring capability. Adjustable pulse duration, spatiotemporal chirp, phase front tilt and polarization allow control of photomodification via uniquely wide parameter space. Mature opto-electrical/mechanical technologies have enabled laser processing speeds approaching meters-per-second, leading to a fast lab-to-fab transfer. The key aspects and latest achievements are reviewed with an emphasis on the fundamental relation between spatial resolution and total fabrication throughput. Emerging biomedical applications implementing micrometer feature precision over centimeter-scale scaffolds and photonic wire bonding in telecommunications are highlighted.

Laser-Induced Periodic Surface Structures— A Scientific Evergreen

Abstract: Laser-induced periodic surface structures (LIPSS, ripples) are a universal phenomenon and can be generated on almost any material upon irradiation with linearly polarized radiation. With the availability of ultrashort laser pulses, LIPSS have gained an increasing attraction during the past decade, since these structures can be generated in a simple single-step process, which allows a surface nanostructuring for tailoring optical, mechanical, and chemical surface properties. In this study, the current state in the field of LIPSS is reviewed. Their formation mechanisms are analyzed in ultrafast time-resolved scattering, diffraction, and polarization constrained double-pulse experiments. These experiments allow us to address the question whether the LIPSS are seeded via ultrafast energy deposition mechanisms acting during the absorption of optical radiation or via self-organization after the irradiation process. Relevant control parameters of LIPSS are identified, and technological applications featuring surface functionalization in the fields of optics, fluidics, medicine, and tribology are discussed.

Ultrafast laser processing of materials: a review

Abstract: We present an overview of the different processes that can result from focusing an ultrafast laser light in the femtosecond–nanosecond time regime on a host of materials, e.g., metals, semiconductors, and insulators. We summarize the physical processes and surface and bulk applications and highlight how femtosecond lasers can be used to process various materials. Throughout this paper, we will show the advantages and disadvantages of using ultrafast lasers compared with lasers that operate in other regimes and demonstrate their potential for the ultrafast processing of materials and structures.

Method of material processing by laser filamentation

Abstract: A method is provided for the internal processing of a transparent substrate in preparation for a cleaving step. The substrate is irradiated with a focused laser beam that is comprised of pulses having an energy and pulse duration selected to produce a filament within the substrate. The substrate is translated relative to the laser beam to irradiate the substrate and produce an additional filament at one or more additional locations. The resulting filaments form an array defining an internally scribed path for cleaving said substrate. Laser beam parameters may be varied to adjust the filament length and position, and to optionally introduce V-channels or grooves, rendering bevels to the laser-cleaved edges. Preferably, the laser pulses are delivered in a burst train for lowering the energy threshold for filament formation, increasing the filament length, thermally annealing of the filament modification zone to minimize collateral damage, improving process reproducibility, and increasing the processing speed compared with the use of low repetition rate lasers.