By using a multiple receiving coil composed of receiving coils, an imaging portion of a subject is subjected to a first pulse sequence to create n sensitivity images (701 to 703) fewer than the examination images. When these sensitivity images are created, an NMR signal is measured for only the low-frequency region of the k space. A second pulse sequence from which a phase encode step is removed is conducted to create m (m>n) examination images (704, 705) of the subject by using the receiving coils. When sensitivity distributions (707, 708) of the receiving coils are determined for the sensitivity images (701 to 703), and if there are no sensitivity distributions corresponding to the slice positions of the examination images (704, 705), they are determined by slice interpolation using the sensitivity distributions (701 to 703), and the aliasing artifacts of the examination images (704, 705) are removed by matrix operation by using the sensitivity distributions (707, 708).

Magnetic resonance imaging device

The use of magnets made of high temperature superconductors (HTS) such as BSCCO and REBCO easily provide higher magnetic fields and higher operating temperatures, enabling dramatic improvements in superconducting magnet technology. The LTS magnet technology is very well summarized in text books written by M. N. Wilson (Superconducting magnets, Clarendon Press Oxford, 1983) and Y. Iwasa (Case studies in superconducting magnets, 2nd edition, Springer, 2009), covering such topics as stability, protection, ac loss and so forth. To the contrary, HTS conductors were commercialized only recently and therefore the magnet technology for HTS conductors remains undeveloped, especially so in the case of REBCO conductors. The technological problems for HTS coils thus far encountered are 1) an enormous effect of a screening current-induced magnetic field, 2) degradation in the coil performance due to excessive mechanical stresses applied along the longitudinal and transverse direction, and 3) the difficulty in protecting the magnet in the case of an abrupt thermal runaway. This paper reviews recent progress in overcoming these technological problems for HTS magnets. Both BSCCO and REBCO conductors have been used for HTS magnets in areas such as high field facilities, NMR, MRI, magnetic levitation trains and so forth. The effect of the screening current is the major problem for NMR, MRI, and accelerators, as it substantially distorts spatial field homogeneity and temporal field stability; on the other hand, degradation due to excessive stresses is substantial for high field magnets. Additionally, coil protection is a common and substantive problem among high current density HTS magnets in general. World-wide activities in developing BSCCO and REBCO magnets are overviewed in this paper.

Recent Developments in High-Temperature Superconducting Magnet Technology (Review)

A review of non-traditional approaches and emerging trends in superconducting magnets for MRI is presented. Novel technologies and concepts have arisen in response to new clinical imaging needs, changes in market cost structure, and the realities of newly developing markets. Among key trends are an increasing emphasis on patient comfort and the need for ?greener? magnets with reduced helium usage. The paper starts with a brief overview of the well-optimized conventional MR magnet technology that presently firmly occupies the dominant position in the imaging market up to 9.4?T. Non-traditional magnet geometries, with an emphasis on openness, are reviewed. The prospects of MgB2 and high-temperature superconductors for MRI applications are discussed. In many cases the introduction of novel technologies into a cost-conscious commercial market will be stimulated by growing needs for advanced customized procedures, and specialty scanners such as orthopedic or head imagers can lead the way due to the intrinsic advantages in their design. A review of ultrahigh-field MR is presented, including the largest 11.7?T Iseult magnet. Advanced cryogenics approaches with an emphasis on low-volume helium systems, including hermetically sealed self-contained cryostats requiring no user intervention, as well as future non-traditional non-helium cryogenics, are presented.

Novel technologies and configurations of superconducting magnets for MRI

This paper reports a study on BSCCO and ReBCO HTS (high temperature superconducting) test coils, layer-wound and double-pancake, with and without turn-to-turn insulation. Over current tests were performed in a bath of liquid nitrogen to compare stabilities of the test coils at 77 K. Saturation of magnetic fields from the NI (no insulation) coils, both BSCCO and ReBCO, was observed owing to current bypassing through turn-to-turn contacts in local quenches at operating currents higher than their critical currents. In the NI ReBCO coils, global quenches occurred at operating currents higher than the coil critical currents and quench recoveries were observed during discharge of the coils. The experimental results, obtained to date, demonstrate that the NI winding method enables remarkable improvement of thermal stability of the HTS coils.

A Study on the No Insulation Winding Method of the HTS Coil

The role of MRI in diagnostics, prognostics, and discoveries in basic sciences has been well established. However, access to this life-saving technology is largely restricted to countries in upper-middle to high-income groups. In this article, we collate recent global MR scanner density data and group them into six geographical regions based on the WHO classification. We then analyze these data with respect to demographic factors such as population size, life expectancy, the percentage of internet users, and World Bank income grouping. We map these demographic factors to five dimensions or characteristics of accessible MRI, adapting definitions from the healthcare literature. With this background, the study then reviews recent demonstrations of accessible MRI categorized based on main magnetic field strength. We describe demonstrated examples for each of these categories, ranging from ultralow-field to ultrahigh-field MRI. Lastly, we review MR methods and associated developments impacting accessible MRI such as increasing/augmenting MR awareness and local expertise, incorporating hardware-cognizant methods, rapid quantitative imaging, and leveraging innovations from adjacent fields. Level of Evidence: 5 Technical Efficacy Stage: 6 J. Magn. Reson. Imaging 2019.

Accessible magnetic resonance imaging: A review.

Purpose To build and evaluate a small-footprint, lightweight, high-performance 3T MRI scanner for advanced brain imaging with image quality that is equal to or better than conventional whole-body clinical 3T MRI scanners, while achieving substantial reductions in installation costs. Methods A conduction-cooled magnet was developed that uses less than 12 liters of liquid helium in a gas-charged sealed system, and standard NbTi wire, and weighs approximately 2000 kg. A 42-cm inner-diameter gradient coil with asymmetric transverse axes was developed to provide patient access for head and extremity exams, while minimizing magnet-gradient interactions that adversely affect image quality. The gradient coil was designed to achieve simultaneous operation of 80-mT/m peak gradient amplitude at a slew rate of 700 T/m/s on each gradient axis using readily available 1-MVA gradient drivers. Results In a comparison of anatomical imaging in 16 patients using T2 -weighted 3D fluid-attenuated inversion recovery (FLAIR) between the compact 3T and whole-body 3T, image quality was assessed as equivalent to or better across several metrics. The ability to fully use a high slew rate of 700 T/m/s simultaneously with 80-mT/m maximum gradient amplitude resulted in improvements in image quality across EPI, DWI, and anatomical imaging of the brain. Conclusions The compact 3T MRI system has been in continuous operation at the Mayo Clinic since March 2016. To date, over 200 patient studies have been completed, including 96 comparison studies with a clinical 3T whole-body MRI. The increased gradient performance has reliably resulted in consistently improved image quality.

/pdf/lightweight-compact-and-high-performance-3t-mr-system-for-4yk2d6vmzf.pdf

Lightweight, compact, and high-performance 3T MR system for imaging the brain and extremities

The authors have reported the results of low n -value from a MgB2 test coil developed a year ago. A second test coil has been developed with wire of different structure and manufacturing process. Although the n-value related voltage of the second test coil was lower than the first test coil at designed current, it still showed low n-value. A third test coil has been wound with reduced mechanical stress. It also showed very similar n-value related voltage and n-value. Investigation of voltage distribution over the coil indicated that magnetic field was the major factor causing degradation of the n-value and resulting in n -value related voltages. Since the n-value related coil voltages were on the order of 0.1 μV/cm, the usual short sample Ic test (1 μV/cm was the definition of Ic ) might not detect the n-value related voltage and might not be able to investigate the cause of low n -value. Therefore, the medium length ( ~ 10 m) samples were tested and they showed the wire's lengthwise nonuniformity both on n-value and Ic, which might be another potential cause of the low n-value of the coil. Along with the electrical investigation, the manufacturing process of the wire was carefully inspected for longitudinal uniformity. Some wire segment samples from the same batch exhibited nonuniformity in the particle size distribution resulting in nonuniform filaments. This might have occurred in the wire for the second and third test coils.

Second Test Coil for the Development of a Compact 3 T $ \hbox{MgB}_{2}$ Magnet

A system and method for a magnetic resonance (MR) imaging system includes a coil form, at least one magnet positioned about the coil form and configured to generate a magnetic field, at least one gradient coil for manipulating the magnetic field generated by the at least one magnet by way of a gradient field, and a heat pipe thermally connected to the coil form and having a cryogen therein. The MR imaging system also includes a cryocooler connected to the heat pipe to cool the heat pipe and the cryogen, wherein the coil form is comprised of a thermally conductive material in which eddy currents are substantially reduced during operation of the at least one gradient coil. The present invention has been described in terms of the preferred embodiment, and it is recognized that equivalents, alternatives, and modifications, aside from those expressly stated, are possible and within the scope of the appending claims.

Heat pipe cooled suerconducting magnets with ceramic coil forms

A superconducting magnet system includes a coil support structure, superconducting coils, and electrically and thermally conductive windings. The superconducting coils and the conductive windings are supported by the coil support structure. Each conductive winding is electromagnetically coupled with a corresponding superconducting coil. Each conductive winding is electrically shorted.

Superconducting magnet system

A warm bore cylinder assembly having an outer wall, an inner wall, and a plurality of braces is provided. The outer wall is configured to define an inner exterior portion of a cryostat assembly. The outer wall is generally cylindrical, is made of a conductive material, and has an outer wall thickness. The inner wall is disposed radially inwardly of the outer wall. The inner wall is generally cylindrical, is made of a conductive material, and has an inner wall thickness. The braces extend along an axial direction defined by the outer wall and the inner wall. The plurality of braces are interposed between and join the outer wall and inner wall. The plurality of braces define openings disposed between adjacent braces.

Minfeng Xu

Papers

Lightweight, compact, and high-performance 3T MR system for imaging the brain and extremities

Second Test Coil for the Development of a Compact 3 T $ \hbox{MgB}_{2}$ Magnet

Heat pipe cooled suerconducting magnets with ceramic coil forms

Superconducting magnet system

Warm bore cylinder assembly