scispace - formally typeset
Search or ask a question
Author

Ming Y. Tang

Bio: Ming Y. Tang is an academic researcher from Massachusetts Institute of Technology. The author has contributed to research in topics: Thermoelectric effect & Thermoelectric materials. The author has an hindex of 5, co-authored 7 publications receiving 4169 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the ability to achieve a simultaneous increase in the power factor and a decrease in the thermal conductivity of the same nanocomposite sample and for transport in the same direction is discussed.
Abstract: Many of the recent advances in enhancing the thermoelectric figure of merit are linked to nanoscale phenomena found both in bulk samples containing nanoscale constituents and in nanoscale samples themselves. Prior theoretical and experimental proof-of-principle studies on quantum-well superlattice and quantum-wire samples have now evolved into studies on bulk samples containing nanostructured constituents prepared by chemical or physical approaches. In this Review, nanostructural composites are shown to exhibit nanostructures and properties that show promise for thermoelectric applications, thus bringing together low-dimensional and bulk materials for thermoelectric applications. Particular emphasis is given in this Review to the ability to achieve 1) a simultaneous increase in the power factor and a decrease in the thermal conductivity in the same nanocomposite sample and for transport in the same direction and 2) lower values of the thermal conductivity in these nanocomposites as compared to alloy samples of the same chemical composition. The outlook for future research directions for nanocomposite thermoelectric materials is also discussed.

3,562 citations

Journal ArticleDOI
TL;DR: A dimensionless thermoelectric figure-of-merit (ZT) of 0.95 in p-type nanostructured bulk silicon germanium (SiGe) alloys is achieved, which is about 90% higher than what is currently used in space flight missions, and half higher than the reported record.
Abstract: A dimensionless thermoelectric figure-of-merit (ZT) of 0.95 in p-type nanostructured bulk silicon germanium (SiGe) alloys is achieved, which is about 90% higher than what is currently used in space flight missions, and 50% higher than the reported record in p-type SiGe alloys. These nanostructured bulk materials were made by using a direct current-induced hot press of mechanically alloyed nanopowders that were initially synthesized by ball milling of commercial grade Si and Ge chunks with boron powder. The enhancement of ZT is due to a large reduction of thermal conductivity caused by the increased phonon scattering at the grain boundaries of the nanostructures combined with an increased power factor at high temperatures.

999 citations

Journal ArticleDOI
TL;DR: In this article, the ability to achieve a simultaneous increase in the power factor and a decrease in the thermal conductivity of the same nanocomposite sample and for transport in the same direction is discussed.
Abstract: Many of the recent advances in enhancing the thermoelectric figure of merit are linked to nanoscale phenomena found both in bulk samples containing nanoscale constituents and in nanoscale samples themselves. Prior theoretical and experimental proof-of-principle studies on quantum-well superlattice and quantum-wire samples have now evolved into studies on bulk samples containing nanostructured constituents prepared by chemical or physical approaches. In this Review, nanostructural composites are shown to exhibit nanostructures and properties that show promise for thermoelectric applications, thus bringing together low-dimensional and bulk materials for thermoelectric applications. Particular emphasis is given in this Review to the ability to achieve 1) a simultaneous increase in the power factor and a decrease in the thermal conductivity in the same nanocomposite sample and for transport in the same direction and 2) lower values of the thermal conductivity in these nanocomposites as compared to alloy samples of the same chemical composition. The outlook for future research directions for nanocomposite thermoelectric materials is also discussed.

35 citations

Journal ArticleDOI
TL;DR: In this article, the concept of using self-assembled and force-engineered nanostructures to enhance the thermoelectric figure of merit relative to bulk homogeneous and composite materials is presented in general terms.
Abstract: The concept of using “self-assembled” and “force-engineered” nanostructures to enhance the thermoelectric figure of merit relative to bulk homogeneous and composite materials is presented in general terms. Specific application is made to the Si-Ge system for use in power generation at high temperature. The scientific advantages of the nanocomposite approach for the simultaneous increase in the power factor and decrease of the thermal conductivity are emphasized along with the practical advantages of having bulk samples for property measurements and a straightforward path to scale-up materials synthesis and integration of nanostructured materials into thermoelectric cooling and power generation devices.

29 citations

Proceedings ArticleDOI
19 Jun 2005
Abstract: In this study, we developed a nano-composite approach to make bulk materials with nanostructures that have lower thermal conductivity than their bulk alloy counterparts. Room temperature measurement results of Si/Ge composites with nano-particle shows lower thermal conductivity than that of Si/Ge composites made with micro-sized particles. For high density sample, we also observed thermal conductivity reduction without deterioration of electrical conductivity so that higher ZT than bulk alloy is achieved.

5 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: A new era of complex thermoelectric materials is approaching because of modern synthesis and characterization techniques, particularly for nanoscale materials, and the strategies used to improve the thermopower and reduce the thermal conductivity are reviewed.
Abstract: Thermoelectric materials, which can generate electricity from waste heat or be used as solid-state Peltier coolers, could play an important role in a global sustainable energy solution. Such a development is contingent on identifying materials with higher thermoelectric efficiency than available at present, which is a challenge owing to the conflicting combination of material traits that are required. Nevertheless, because of modern synthesis and characterization techniques, particularly for nanoscale materials, a new era of complex thermoelectric materials is approaching. We review recent advances in the field, highlighting the strategies used to improve the thermopower and reduce the thermal conductivity.

8,999 citations

Journal ArticleDOI
04 Feb 2011-Science
TL;DR: It is shown that WS2 and MoS2 effectively reinforce polymers, whereas WS2/carbon nanotube hybrid films have high conductivity, leading to promising thermoelectric properties.
Abstract: If they could be easily exfoliated, layered materials would become a diverse source of two-dimensional crystals whose properties would be useful in applications ranging from electronics to energy storage. We show that layered compounds such as MoS2, WS2, MoSe2, MoTe2, TaSe2, NbSe2, NiTe2, BN, and Bi2Te3 can be efficiently dispersed in common solvents and can be deposited as individual flakes or formed into films. Electron microscopy strongly suggests that the material is exfoliated into individual layers. By blending this material with suspensions of other nanomaterials or polymer solutions, we can prepare hybrid dispersions or composites, which can be cast into films. We show that WS2 and MoS2 effectively reinforce polymers, whereas WS2/carbon nanotube hybrid films have high conductivity, leading to promising thermoelectric properties.

6,043 citations

Journal ArticleDOI
02 May 2008-Science
TL;DR: Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects, which makes these materials useful for cooling and power generation.
Abstract: The dimensionless thermoelectric figure of merit (ZT) in bismuth antimony telluride (BiSbTe) bulk alloys has remained around 1 for more than 50 years. We show that a peak ZT of 1.4 at 100°C can be achieved in a p-type nanocrystalline BiSbTe bulk alloy. These nanocrystalline bulk materials were made by hot pressing nanopowders that were ball-milled from crystalline ingots under inert conditions. Electrical transport measurements, coupled with microstructure studies and modeling, show that the ZT improvement is the result of low thermal conductivity caused by the increased phonon scattering by grain boundaries and defects. More importantly, ZT is about 1.2 at room temperature and 0.8 at 250°C, which makes these materials useful for cooling and power generation. Cooling devices that use these materials have produced high-temperature differences of 86°, 106°, and 119°C with hot-side temperatures set at 50°, 100°, and 150°C, respectively. This discovery sets the stage for use of a new nanocomposite approach in developing high-performance low-cost bulk thermoelectric materials.

4,695 citations

Journal ArticleDOI
TL;DR: In this article, the authors demonstrate a simple, low cost and effective approach of using the charging process in friction to convert mechanical energy into electric power for driving small electronics, which is fabricated by stacking two polymer sheets made of materials having distinctly different triboelectric characteristics, with metal films deposited on the top and bottom of the assembled structure.

4,069 citations