scispace - formally typeset
Search or ask a question
Author

Mitsuyoshi Ueda

Bio: Mitsuyoshi Ueda is an academic researcher from Kyoto University. The author has contributed to research in topics: Yeast & Saccharomyces cerevisiae. The author has an hindex of 20, co-authored 70 publications receiving 1658 citations. Previous affiliations of Mitsuyoshi Ueda include Japan Society for the Promotion of Science.


Papers
More filters
Journal ArticleDOI
TL;DR: A whole-cell biocatalyst with the ability to induce synergistic and sequential cellulose-degradation reaction was constructed through codisplay of three types of cellulolytic enzyme on the cell surface of the yeast Saccharomyces cerevisiae, indicating that simultaneous and synergistic saccharification and fermentation of amorphous cellulose to ethanol can be efficiently accomplished.
Abstract: A whole-cell biocatalyst with the ability to induce synergistic and sequential cellulose-degradation reaction was constructed through codisplay of three types of cellulolytic enzyme on the cell surface of the yeast Saccharomyces cerevisiae. When a cell surface display system based on α-agglutinin was used, Trichoderma reesei endoglucanase II and cellobiohydrolase II and Aspergillus aculeatus β-glucosidase 1 were simultaneously codisplayed as individual fusion proteins with the C-terminal-half region of α-agglutinin. Codisplay of the three enzymes on the cell surface was confirmed by observation of immunofluorescence-labeled cells with a fluorescence microscope. A yeast strain codisplaying endoglucanase II and cellobiohydrolase II showed significantly higher hydrolytic activity with amorphous cellulose (phosphoric acid-swollen cellulose) than one displaying only endoglucanase II, and its main product was cellobiose; codisplay of β-glucosidase 1, endoglucanase II, and cellobiohydrolase II enabled the yeast strain to directly produce ethanol from the amorphous cellulose (which a yeast strain codisplaying β-glucosidase 1 and endoglucanase II could not), with a yield of approximately 3 g per liter from 10 g per liter within 40 h. The yield (in grams of ethanol produced per gram of carbohydrate consumed) was 0.45 g/g, which corresponds to 88.5% of the theoretical yield. This indicates that simultaneous and synergistic saccharification and fermentation of amorphous cellulose to ethanol can be efficiently accomplished using a yeast strain codisplaying the three cellulolytic enzymes.

362 citations

Journal ArticleDOI
TL;DR: These results showed that the glucoamylase was anchored on the cell wall and displayed as its active form, the first example of an application of cell surface engineering to utilize and improve the metabolic ability of cells.
Abstract: We have engineered the cell surface of the yeast Saccharomyces cerevisiae by anchoring active glucoamylase protein on the cell wall, and we have endowed the yeast cells with the ability to utilize starch directly as the sole carbon source. The gene encoding Rhizopus oryzae glucoamylase with its secretion signal peptide was fused with the gene encoding the C-terminal half (320 amino acid residues from the C terminus) of yeast alpha-agglutinin, a protein involved in mating and covalently anchored to the cell wall. The constructed plasmid containing this fusion gene was introduced into S. cerevisiae and expressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter from S. cerevisiae. The glucoamylase activity as not detected in the culture medium, but it was detected in the cell pellet fraction. The glucoamylase protein transferred to the soluble fraction from the cell wall fraction after glucanase treatment but not after sodium dodecyl sulfate treatment, indicating the covalent binding of the fusion protein to the cell wall. Display of the fused protein was further confirmed by immunofluorescence microscopy and immunoelectron microscopy. The transformant cells could surely grow on starch as the sole carbon source. These results showed that the glucoamylase was anchored on the cell wall and displayed as its active form. This is the first example of an application of cell surface engineering to utilize and improve the metabolic ability of cells.

172 citations

Journal ArticleDOI
21 Jun 2013-PLOS ONE
TL;DR: It is shown that B. xylophilus secreted the potential host mimicry proteins that closely resemble the host pine’s proteins, which could have been acquired by host–parasite co-evolution and might mimic the host defense systems in susceptible pine trees during infection.
Abstract: Since it was first introduced into Asia from North America in the early 20th century, the pine wood nematode Bursaphelenchus xylophilus has caused the devastating forest disease called pine wilt. The emerging pathogen spread to parts of Europe and has since been found as the causal agent of pine wilt disease in Portugal and Spain. In 2011, the entire genome sequence of B. xylophilus was determined, and it allowed us to perform a more detailed analysis of B. xylophilus parasitism. Here, we identified 1,515 proteins secreted by B. xylophilus using a highly sensitive proteomics method combined with the available genomic sequence. The catalogue of secreted proteins contained proteins involved in nutrient uptake, migration, and evasion from host defenses. A comparative functional analysis of the secretome profiles among parasitic nematodes revealed a marked expansion of secreted peptidases and peptidase inhibitors in B. xylophilus via gene duplication and horizontal gene transfer from fungi and bacteria. Furthermore, we showed that B. xylophilus secreted the potential host mimicry proteins that closely resemble the host pine’s proteins. These proteins could have been acquired by host–parasite co-evolution and might mimic the host defense systems in susceptible pine trees during infection. This study contributes to an understanding of their unique parasitism and its tangled roots, and provides new perspectives on the evolution of plant parasitism among nematodes.

97 citations

Journal ArticleDOI
TL;DR: This is the first report of an active lipase displayed on the cell surface and insertion of a linker peptide of the appropriate length as a spacer may be an improved method to effectively display enzymes, especially those having the active region at the C-terminal portion, on thecell surface.
Abstract: We have constructed a Saccharomyces cerevisiae strain displaying an active lipase on the cell surface by cell surface engineering. The gene encoding Rhizopus oryzae lipase (ROL) was fused with the genes encoding the pre-α-factor leader sequence and the C-terminal half of α-agglutinin including the glycosylphosphatidylinositol-anchor attachment signal. The constructed gene was overexpressed under the control of the glyceraldehyde-3-phosphate dehydrogenase promoter. Linker peptides (spacers) consisting of the Gly/Ser repeat sequence were inserted at the C-terminal portion of ROL to enhance lipase activity by preserving the conformation of the active site near the C-terminal portion. Localization of the expressed ROL on the cell surface was confirmed by immunofluorescence microscopy. The ROL displayed on the yeast cell wall exhibited activity toward soluble 2,3-dimercaptopropan-1-ol tributyl ester (BALB) and insoluble triolein. The insertion of linker peptides effected the activity towards BALB, thereby demonstrating that the optimal length of linker peptides was present. The activity towards triolein was higher in lipases with longer linker peptides. ROL displayed on the cell wall exhibited a comparable and/or higher activity towards triolein than the secreted form of the enzyme. This is the first report of an active lipase displayed on the cell surface. Furthermore, insertion of a linker peptide of the appropriate length as a spacer may be an improved method to effectively display enzymes, especially those having the active region at the C-terminal portion, on the cell surface.

90 citations

Journal ArticleDOI
TL;DR: Principal component analysis revealed that the 10 Sap isozymes were clustered into 3 distinct groups in terms of their substrate specificities, indicating that they may target similar host proteins and further understanding of C. albicans pathogenicity.
Abstract: Candida albicans is a commensal organism, but causes life-threatening infections in immunocompromised patients. Certain factors such as yeast-hyphae transition and hydrolytic enzymes are suggested as virulence attributes of C. albicans. Among them, 10 types of secreted aspartic protease (SAP) genes have received particular attention as a major virulence gene family. However, their full functional repertoire, including its biochemical properties, remains to be elucidated. Hence, we purified all Sap isozymes using Pichia pastoris and comprehensively determined and compared their biochemical properties. While optimum pH of Sap7 was 6.5 and that of Sap8 was 2.5, presence of other Sap isozymes functioning within a broad range of optimum pH could allow C. albicans to survive and cause infections in various tissues. The substrate specificities of Sap isozymes were analysed by using FRETS-25Xaa libraries. Sap7 and Sap10 showed high substrate specificity, while other Sap isozymes had broad substrate specificities. Principal component analysis revealed that the 10 Sap isozymes were clustered into 3 distinct groups in terms of their substrate specificities. Interestingly, Sap4-6, which are coproduced in the hyphal form, were clustered as the same group, indicating that they may target similar host proteins. These results will lead to further understanding of C. albicans pathogenicity.

82 citations


Cited by
More filters
01 Jun 2012
TL;DR: SPAdes as mentioned in this paper is a new assembler for both single-cell and standard (multicell) assembly, and demonstrate that it improves on the recently released E+V-SC assembler and on popular assemblers Velvet and SoapDeNovo (for multicell data).
Abstract: The lion's share of bacteria in various environments cannot be cloned in the laboratory and thus cannot be sequenced using existing technologies. A major goal of single-cell genomics is to complement gene-centric metagenomic data with whole-genome assemblies of uncultivated organisms. Assembly of single-cell data is challenging because of highly non-uniform read coverage as well as elevated levels of sequencing errors and chimeric reads. We describe SPAdes, a new assembler for both single-cell and standard (multicell) assembly, and demonstrate that it improves on the recently released E+V-SC assembler (specialized for single-cell data) and on popular assemblers Velvet and SoapDeNovo (for multicell data). SPAdes generates single-cell assemblies, providing information about genomes of uncultivatable bacteria that vastly exceeds what may be obtained via traditional metagenomics studies. SPAdes is available online ( http://bioinf.spbau.ru/spades ). It is distributed as open source software.

10,124 citations

Journal ArticleDOI
TL;DR: A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.
Abstract: Fundamental features of microbial cellulose utilization are examined at successively higher levels of aggregation encompassing the structure and composition of cellulosic biomass, taxonomic diversity, cellulase enzyme systems, molecular biology of cellulase enzymes, physiology of cellulolytic microorganisms, ecological aspects of cellulase-degrading communities, and rate-limiting factors in nature. The methodological basis for studying microbial cellulose utilization is considered relative to quantification of cells and enzymes in the presence of solid substrates as well as apparatus and analysis for cellulose-grown continuous cultures. Quantitative description of cellulose hydrolysis is addressed with respect to adsorption of cellulase enzymes, rates of enzymatic hydrolysis, bioenergetics of microbial cellulose utilization, kinetics of microbial cellulose utilization, and contrasting features compared to soluble substrate kinetics. A biological perspective on processing cellulosic biomass is presented, including features of pretreated substrates and alternative process configurations. Organism development is considered for "consolidated bioprocessing" (CBP), in which the production of cellulolytic enzymes, hydrolysis of biomass, and fermentation of resulting sugars to desired products occur in one step. Two organism development strategies for CBP are examined: (i) improve product yield and tolerance in microorganisms able to utilize cellulose, or (ii) express a heterologous system for cellulose hydrolysis and utilization in microorganisms that exhibit high product yield and tolerance. A concluding discussion identifies unresolved issues pertaining to microbial cellulose utilization, suggests approaches by which such issues might be resolved, and contrasts a microbially oriented cellulose hydrolysis paradigm to the more conventional enzymatically oriented paradigm in both fundamental and applied contexts.

4,769 citations

Journal ArticleDOI
23 Nov 2017-Nature
TL;DR: Adenine base editors (ABEs) that mediate the conversion of A•T to G•C in genomic DNA are described and a transfer RNA adenosine deaminase is evolved to operate on DNA when fused to a catalytically impaired CRISPR–Cas9 mutant.
Abstract: The spontaneous deamination of cytosine is a major source of transitions from C•G to T•A base pairs, which account for half of known pathogenic point mutations in humans. The ability to efficiently convert targeted A•T base pairs to G•C could therefore advance the study and treatment of genetic diseases. The deamination of adenine yields inosine, which is treated as guanine by polymerases, but no enzymes are known to deaminate adenine in DNA. Here we describe adenine base editors (ABEs) that mediate the conversion of A•T to G•C in genomic DNA. We evolved a transfer RNA adenosine deaminase to operate on DNA when fused to a catalytically impaired CRISPR-Cas9 mutant. Extensive directed evolution and protein engineering resulted in seventh-generation ABEs that convert targeted A•T base pairs efficiently to G•C (approximately 50% efficiency in human cells) with high product purity (typically at least 99.9%) and low rates of indels (typically no more than 0.1%). ABEs introduce point mutations more efficiently and cleanly, and with less off-target genome modification, than a current Cas9 nuclease-based method, and can install disease-correcting or disease-suppressing mutations in human cells. Together with previous base editors, ABEs enable the direct, programmable introduction of all four transition mutations without double-stranded DNA cleavage.

2,451 citations

19 Nov 2012

1,653 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review quantitative cellulase activity assays using soluble and insoluble substrates, and focus on their advantages and limitations, and hypothesize that continuous culture using insoluble cellulosic substrates could be a powerful selection tool for enriching beneficial cellulase mutants from the large library displayed on the cell surface.

1,495 citations