Mohammad Reza Sovizi

Bio: Mohammad Reza Sovizi is an academic researcher from Malek-Ashtar University of Technology. The author has contributed to research in topics: Thermal decomposition & Anode. The author has an hindex of 12, co-authored 37 publications receiving 499 citations.

Thermal behavior of drugs

Abstract: Data on the thermal stability of drugs was required to obtain information for handling, storage, shelf life and usage. In this study, the thermal stability of two nonsteroidal anti-inflammatory drugs (NSAIDs) was determined by differential scanning calorimetry (DSC) and simultaneous thermogravimetery/differential thermal analysis (TG/DTA) techniques. The results of TG analysis revealed that the main thermal degradation for the naproxen and celecoxib occurs in the temperature ranges of 196–300 and 245–359 °C, respectively. The TG/DTA analysis of compounds indicates that naproxen melts (at about 158.1 °C) before it decomposes. However, the thermal decomposition of the celecoxib started about 185 °C after its melting. The influence of the heating rate (5, 10, 15, and 20 °C min−1) on the DSC behavior of the both drug samples was verified. The results showed that, as the heating rate was increased, decomposition temperatures of the compounds were increased. Also, the kinetic parameters such as activation energy and frequency factor for the compounds were obtained from the DSC data by non-isothermal methods proposed by ASTM E696 and Ozawa. Based on the values of activation energy obtained by various methods, the following order for the thermal stability was noticed: naproxen > celecoxib. Finally, the values of ΔS #, ΔH #, and ΔG # of their decomposition reaction were calculated.

Porous gel polymer electrolyte for the solid state metal oxide supercapacitor with a wide potential window

Abstract: The potential window plays an important role in the performance of a supercapacitor and the gel polymer electrolyte (GPE) is the widespread interest in this context. GP electrolytes have high ionic conductivity, excellent electrochemical stability, and suitable ion transfer. So, in this work, the porous poly(acrylonitrile-polyhedral oligomeric silsesquioxane) (P(A-POS)) membrane electrolyte has been proposed for the metal oxide-based supercapacitors. The porous membrane was synthesized via the phase inversion process and after the liquid organic electrolyte uptake, it was used as GPE in Co3O4 nanoribbon/activated carbon asymmetric supercapacitor. The positive electrode based on Co3O4 nanoribbon (NR-Co3O4) offered a high specific capacitance of 2380.4 mF cm−2 at a current density of 2 mA cm−2 and the organic liquid electrolyte uptake of (P(A-POS)) membrane was 405%. The results indicated that the supercapacitor with NR-Co3O4 positive electrode and (P(A-POS)) porous membrane shows wide potential window of 4 V and low charge transfer resistance of 1.1 Ω in a solid-state asymmetric supercapacitor.

Carbon-based magnetic nanocomposites in solid phase dispersion for the preconcentration some of lanthanides, followed by their quantitation via ICP-OES

Abstract: We report on a method for the extraction of the lanthanide ions La(III), Sm(III), Nd(III) and Pr(III) using a carbon-ferrite magnetic nanocomposite as a new adsorbent, and their determination via flow injection ICP-OES. The lanthanide ions were converted into their complexes with 4-(2-pyridylazo)resorcinol, and these were adsorbed onto the nanocomposite. Fractional factorial design and central composite design were applied to optimize the extraction efficiencies to result in preconcentration factors in the range of 141–246. Linear calibration plots were obtained, the limits of detection (at S/N = 3) are between 0.5 and 10 μg L−1, and the intra-day precisions (n = 3) range from 3.1 to 12.8 %. The method was successfully applied to a certified reference material.

Nitrogen-Doped Mesoporous Carbon Promoted Chemical Adsorption of Sulfur and Fabrication of High-Areal-Capacity Sulfur Cathode with Exceptional Cycling Stability for Lithium-Sulfur Batteries

Abstract: As one important component of sulfur cathodes, the carbon host plays a key role in the electrochemical performance of lithium-sulfur (Li-S) batteries. In this paper, a mesoporous nitrogen-doped carbon (MPNC)-sulfur nanocomposite is reported as a novel cathode for advanced Li-S batteries. The nitrogen doping in the MPNC material can effectively promote chemical adsorption between sulfur atoms and oxygen functional groups on the carbon, as verifi ed by X-ray absorption near edge structure spectroscopy, and the mechanism by which nitrogen enables the behavior is further revealed by density functional theory calculations. Based on the advantages of the porous structure and nitrogen doping, the MPNC-sulfur cathodes show excellent cycling stability (95% retention within 100 cycles) at a high current density of 0.7 mAh cm −2 with a high sulfur loading (4.2 mg S cm −2 ) and a sulfur content (70 wt%). A high areal capacity (≈3.3 mAh cm −2 ) is demonstrated by using the novel cathode, which is crucial for the practical application of Li-S batteries. It is believed that the important role of nitrogen doping promoted chemical adsorption can be extended for development of other high performance carbon-sulfur composite cathodes for Li-S batteries.

Emerging Non-Aqueous Potassium-Ion Batteries: Challenges and Opportunities

Abstract: The ever-increasing demand for storing renewable energy sources calls for novel battery technologies that are of sustainably low levelized energy cost. Research into battery chemistry has evolved to a stage where a plethora of choices based on earth-abundant elements can be compared during their development. One of the emerging candidates is the nonaqueous potassium-ion battery. K-ion’s unique properties as a charge carrier have aroused intense interest in exploring high-performing cathode and anode materials for this battery. Rapid progress has been made, where leading candidates of electrodes have been proposed, i.e., hard carbon as anode and Prussian white analogues as cathode. In this new battery technology’s infancy, it is our opinion that the focus should be given to potentially scalable, inexpensive electrode materials and the understanding of their cycle-life-property correlations. It may be the ultralong cycle life that differentiates potassium-ion batteries from sodium-ion batteries in the futur...

Review of MXenes as new nanomaterials for energy storage/delivery and selected environmental applications

Abstract: Energy and environmental issues presently attract a great deal of scientific attention. Recently, two-dimensional MXenes and MXene-based nanomaterials have attracted increasing interest because of their unique properties (e.g., remarkable safety, a very large interlayer spacing, environmental flexibility, a large surface area, and thermal conductivity). In 2011, multilayered MXenes (Ti3C2Tx, a new family of two-dimensional (2D) materials) produced by etching an A layer from a MAX phase of Ti3AlC2, were first described by researchers at Drexel University. The term “MXene” was coined to distinguish this new family of 2D materials from graphene, and applies to both the original MAX phases and MXenes fabricated from them. We present a comprehensive review of recent studies on energy and environmental applications of MXene and MXene-based nanomaterials, including energy conversion and storage, adsorption, membrane, photocatalysis, and antimicrobial. Future research needs are discussed briefly with current challenges that must be overcome before we completely understand the extraordinary properties of MXene and MXene-based nanomaterials.

Hydroxylated Graphene-Sulfur Nanocomposites for High-Rate Lithium-Sulfur Batteries

Abstract: Introduction Lithium-sulfur batteries are considered as a promising candidate for next-generation secondary batteries because of their high theoretical capacit y, safe operating voltage (2.15 V vs. Li/Li ), and low cost. Nevertheless, lithium-sulfur batteries suffer from capacity fading, which limits their widespread application, due to the insulating nature of sulfur and its reduced pro ducts and the dissolution of intermediate lithium polysul fides. To address these problems, carbon-based materials have been integrated with sulfur to enhance the conductivity and inhibit the polysulfide dissolutio n. Recently, graphene, a single-atom-thick carbon mate rial with superior electrical conductivity and mechanica l flexibility, has been successfully applied in lithi um-sulfur batteries. While graphene-sulfur composite cathodes demonstrate promising electrochemical performance, their synthesis is usually complicated and challeng ing for large-scale application. On the other hand, the sol utionbased synthesis without heat treatment produces lar ge crystalline sulfur particles, resulting in low util ization of active materials and poor rate performance. Herein, we report hydroxylated graphene nanosheets as a substr ate to produce graphene-amorphous sulfur nanocomposites, exhibiting superior cyclability at high rates, by a facile in situ deposition method at room temperature.