Morten Ibsen

Bio: Morten Ibsen is an academic researcher from University of Southampton. The author has contributed to research in topics: Fiber Bragg grating & Fiber laser. The author has an hindex of 46, co-authored 361 publications receiving 7396 citations. Previous affiliations of Morten Ibsen include Norwegian University of Science and Technology & Wellington Management Company.

Multiwavelength generation in an erbium-doped fiber laser using in-fiber comb filters

Abstract: Simultaneous continuous wave multiwavelength operation of an erbium-doped fiber laser has been demonstrated using two types of recently developed in-fiber grating comb filters. The lasing wavelengths and linewidths were determined by the comb filter, which was inserted in a ring cavity with a single inhomogeneously broadened gain medium.

Sinc-sampled fiber Bragg gratings for identical multiple wavelength operation

Abstract: Through a periodic sine modulation of the refractive index-profile in fiber Bragg gratings (FBGs), we demonstrate gratings with multiple equally spaced and identical wavelength channels. We show 10-cm-long gratings with 4, 8, and 16 identical uniform wavelength channels separated by the ITU spacing of 100 GHz and a 22.5-cm-long grating with four identical dispersion compensating channels with a 200-GHz separation designed to dispersion compensate 80-km data transmission through standard fiber at 1.55 /spl mu/m.

Pulsed light sources

Abstract: A source of pulses of coherent radiation at a wavelength of approximately 1 μm, comprises a pump source for producing pump light; a laser cavity comprising an Yb3+-doped gain medium arranged to receive the pump light, the laser cavity being modelocked to generate laser pulses at a defined repetition rate; a pulse detector arranged to generate a pulse selection signal indicative of the repetition rate; a pulse selector arranged to reduce the repetition rate of the laser pulses responsive to the pulse selection signal from the pulse detector by passing only selected ones of the laser pulses; and at least one optical amplifier for amplifying the laser pulses of reduced repetition rate. The at least one optical amplifier can be configured for chirped or parabolic pulse amplification.

A comparative study of the performance of seven- and 63-chip optical code-division multiple-access encoders and decoders based on superstructured fiber Bragg gratings

Abstract: We report a range of elementary optical coding and decoding experiments employing superstructured fiber Bragg grating (SSFBG) components: first, we perform a comparative study of the relative merits of bipolar and unipolar coding: decoding schemes and show that the SSFBG approach allows high-quality unipolar and bipolar coding. A performance close to that-theoretically predicted for seven-chip, 160-Gchip/s M-sequence codes is obtained. Second, we report the fabrication and performance of 63-chip, 160-Gchip/s, bipolar Gold sequence grating pairs. These codes are at least eight times longer than those generated by any other scheme based on fiber grating technology so far reported. Last, we describe a range of transmission system experiments for both the seven- and 63-bit bipolar grating pairs. Error-free performance is obtained over transmission distances of /spl sim/25 km of standard fiber. In addition, we have demonstrated error-free performance under multiuser operation (two simultaneous users). Our results highlight the precision and flexibility of our particular grating writing process and show that SSFBG technology represents a promising technology not just for optical code division multiple access (OCDMA) but also for an extended range of other pulse-shaping optical processing applications.

Rectangular pulse generation based on pulse reshaping using a superstructured fiber Bragg grating

Abstract: We present a technique for the shaping of short pulses based on the use of superstructured fiber Bragg gratings (SSFBGs). We apply this technique to demonstrate the generation of 20-ps rectangular pulses by phase and amplitude profiling of 2.5-ps soliton pulses. Numerical calculations validate our experimental findings.

Supercontinuum generation in photonic crystal fiber

Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

High power fiber lasers: current status and future perspectives [Invited]

Abstract: The rise in output power from rare-earth-doped fiber sources over the past decade, via the use of cladding-pumped fiber architectures, has been dramatic, leading to a range of fiber-based devices with outstanding performance in terms of output power, beam quality, overall efficiency, and flexibility with regard to operating wavelength and radiation format. This success in the high-power arena is largely due to the fiber’s geometry, which provides considerable resilience to the effects of heat generation in the core, and facilitates efficient conversion from relatively low-brightness diode pump radiation to high-brightness laser output. In this paper we review the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in terms of high-power performance. We then review the current status and challenges of extending the technology to other rare-earth dopants and associated wavelengths of operation. Throughout we identify the key factors currently limiting fiber laser performance in different operating regimes—in particular thermal management, optical nonlinearity, and damage. Finally, we speculate as to the likely developments in pump laser technology, fiber design and fabrication, architectural approaches, and functionality that lie ahead in the coming decade and the implications they have on fiber laser performance and industrial/scientific adoption.

Microwave photonics

Abstract: An overview of analog microwave photonics will be presented. The performance requirements for externally-modulated analog microwave photonic links will be reviewed with specific emphasis placed on modulator efficiency, laser noise, detected photocurrent, and link linearity.

Optical gas sensing: a review

Abstract: The detection and measurement of gas concentrations using the characteristic optical absorption of the gas species is important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change. This study reviews the field, covering several individual gas detection techniques including non-dispersive infrared, spectrophotometry, tunable diode laser spectroscopy and photoacoustic spectroscopy. We present the basis for each technique, recent developments in methods and performance limitations. The technology available to support this field, in terms of key components such as light sources and gas cells, has advanced rapidly in recent years and we discuss these new developments. Finally, we present a performance comparison of different techniques, taking data reported over the preceding decade, and draw conclusions from this benchmarking.

Recent progress in distributed fiber optic sensors.

Abstract: Rayleigh, Brillouin and Raman scatterings in fibers result from the interaction of photons with local material characteristic features like density, temperature and strain. For example an acoustic/mechanical wave generates a dynamic density variation; such a variation may be affected by local temperature, strain, vibration and birefringence. By detecting changes in the amplitude, frequency and phase of light scattered along a fiber, one can realize a distributed fiber sensor for measuring localized temperature, strain, vibration and birefringence over lengths ranging from meters to one hundred kilometers. Such a measurement can be made in the time domain or frequency domain to resolve location information. With coherent detection of the scattered light one can observe changes in birefringence and beat length for fibers and devices. The progress on state of the art technology for sensing performance, in terms of spatial resolution and limitations on sensing length is reviewed. These distributed sensors can be used for disaster prevention in the civil structural monitoring of pipelines, bridges, dams and railroads. A sensor with centimeter spatial resolution and high precision measurement of temperature, strain, vibration and birefringence can find applications in aerospace smart structures, material processing, and the characterization of optical materials and devices.