scispace - formally typeset
Search or ask a question
Author

Munmun Banerjee

Other affiliations: Haldia Institute of Technology
Bio: Munmun Banerjee is an academic researcher from University of Calcutta. The author has contributed to research in topics: Adsorption & Langmuir adsorption model. The author has an hindex of 6, co-authored 7 publications receiving 167 citations. Previous affiliations of Munmun Banerjee include Haldia Institute of Technology.

Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a scale-up design for Cr(VI) removal using walnut shell as an adsorbent and its economic feasibility are done to find out its applicability in real life.

90 citations

Journal ArticleDOI
TL;DR: These adsorbents have an excellent potential and are useful for water treatment particularly small- and medium-sized industries of third world countries, as breakthrough time and exhaustion time are longer in comparison to peanut shell.
Abstract: Cr(VI) is a toxic water pollutant, which causes cancer and mutation in living organisms. Adsorption has become the most preferred method for removal of Cr(VI) due to its high efficiency and low cost. Peanut and almond shells were used as adsorbents in downflow fixed bed continuous column operation for Cr(VI) removal. The experiments were carried out to scrutinise the adsorptive capacity of the peanut shells and almond shells, as well as to find out the effect of various operating parameters such as column bed depth (5–10 cm), influent flow rate (10–22 ml min−1) and influent Cr(VI) concentration (10–20 mg L−1) on the Cr(VI) removal. The fixed bed column operation for Cr(VI) adsorption the equilibrium was illustrated by Langmuir isotherm. Different well-known mathematical models were applied to the experimental data to identify the best-fitted model to explain the bed dynamics. Prediction of the bed dynamics by Yan et al. model was found to be satisfactory. Applicability of artificial neural network (ANN) modelling is also reported. An ANN modelling of multilayer perceptron with gradient descent and Levenberg-Marquardt algorithms have also been tried to predict the percentage removal of Cr(VI). This study indicates that these adsorbents have an excellent potential and are useful for water treatment particularly small- and medium-sized industries of third world countries. Almond shell represents better adsorptive capacity as breakthrough time and exhaustion time are longer in comparison to peanut shell.

41 citations

Journal ArticleDOI
01 Mar 2018
TL;DR: Yan et al. as mentioned in this paper used pistachio shells as green and eco-friendly adsorbent for Cr(VI) adsorption, and applied GA-ANN hybrid model to predict the percentage removal.
Abstract: Long-term exposure of Cr(VI) causes severe health effects to the living beings. A continuous fixed bed experimental study is carried out by using pistachio shell as green and eco-friendly adsorbent for Cr(VI) adsorption. Effects of several operating parameters on Cr(VI) removal were investigated using the breakthrough curves ( $$ \frac{C_t}{C_0} $$ versus time) and determination of saturation time ( $$ \frac{C_t}{C_0}\le 1\Big).\kern0.5em $$ Cr(VI) adsorption equilibrium was illustrated by Langmuir isotherm. Different kinetic models like Yan et al. (2001), Thomas (1944), Yoon-Nelson (1984), and Bohart-Adams model(1920) were applied to study the dynamics of the adsorption process.Yan et al. model was found more effective compare to other kinetic models.This studyshowed that the pistachio shells, green adsorbent, have potential adsorption capacity for Cr(VI) ions. Applicability of GA-ANN hybrid model has been tested to predict the percentage removal of Cr(VI).

39 citations

Journal ArticleDOI
TL;DR: This study reveals that peanut and almond shells can be used for Cu(II) removal for industrial wastewater and Regeneration studies show that peanut shell and almond shell are useful up to the fifth adsorption cycle.
Abstract: Cu(II) adsorption in continuous column using green adsorbents like peanut and almond shell was investigated. Fourier transform infrared (FTIR) spectroscopy, Brunaer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), and Point of Zero charge (pHpzc) determination have been used for characterization of the adsorbents. Experiments were conducted at various operating conditions to calculate the adsorption capacity of the adsorbents. Adsorption studies signify that both the adsorbents have good adsorptive capacity for Cu(II) ion. Equilibrium of adsorption was described using Langmuir isotherm and the highest qmax value for both the adsorbent were obtained at an operating condition of 20 ml/min flow rate, 15 mg/L influent Cu(II) concentration, and 7 cm bed depth. Regeneration of both the adsorbents suggests that these adsorbents can be used several times for Cu(II) removal. Seven different kinetic models were tested among which the modified dose response model was fitted well for peanut shell and the Thomas model was fitted well for almond shell. These fitted models were further used for scale-up design. Regeneration studies show that peanut shell and almond shell are useful up to the fifth adsorption cycle. Application of these adsorbents with industrial effluent was also reported. This study reveals that peanut and almond shells can be used for Cu(II) removal for industrial wastewater.

37 citations

Journal ArticleDOI
01 Jul 2019
TL;DR: In this article, the use of three types of nut shells, groundnut shell, walnut shell and almond shell, for removal of chromium (VI) from industrial wastewater was investigated.
Abstract: Chromium (VI) is a well-known toxic, industrial, water pollutant which has various, adverse effects on environmental health. Utilization of agricultural waste in effluent water treatment would minimize the problem of water pollution. The present study deals with the use of three types of nut shells for Cr(VI) removal. Adsorbents are characterized, using point of zero charges (pHpzc), FTIR, BET surface area analysis, and SEM. The variation of different operating parameters on metal removal was conducted. The best sorption kinetic model was pseudo-second order. The adsorption process is both physical and chemical, and this depends on temperature. The Cr(VI) adsorption is spontaneous and endothermic. According to isotherm studies, Langmuir isotherm model fits fairly well for all adsorbents. Regeneration studies suggest that the adsorbents have proper regeneration criteria and can be used for multiple times. Study on RBC count of Gallus gallus domesticus gives concrete evidence of deadly effects of Cr(VI). It also figures out that the effluent solution treated with bio-adsorbents is less harmful. The scale-up design procedure is reported here. This study proved that groundnut shell, walnut shell, and almond shell have immense potential and can be utilized even after regeneration as replacement of commercial adsorbents for industrial wastewater. GA–ANN modeling has been developed for the best possible wastewater treatment management.

31 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, a review of fixed-bed column studies for removal of various contaminants from synthetic wastewater is presented, in which adsorption of chromium metal is most exploitable.
Abstract: Present paper involved the review of fixed-bed column studies for removal of various contaminants from synthetic wastewater. Basic concept of adsorption, its types (i.e., chemisorption and physisorption) and its mechanism, adsorbents and adsorbates were included. Comparison of batch and column adsorption study is mentioned. Complete study of breakthrough curve for designing adsorptive column is interpreted. This paper explicates the detailed explanation of various process parameters and isotherm models for column study. Fixed-bed adsorption studies using various adsorbates, i.e., metal, ion, dye and other hazardous materials, are reviewed, in which adsorption of chromium metal is most exploitable. Conclusion and some challenges for utilization in real world are also exposed.

351 citations

Journal ArticleDOI
TL;DR: In this article, the adsorption of congo red and methylene blue dyes in aqueous solution were characterized via XRD, FTIR and SEM techniques and the dye isotherms at three temperatures were quantified.

287 citations

Journal ArticleDOI
TL;DR: In this paper, the authors reviewed the research undertaken on the production and application of activated carbon as an adsorbent from olive stones for wastewater treatment, and the future prospects of these materials as adsorbents were discussed.
Abstract: Olive stones have been widely used as a renewable energy biowaste source. As they are rich in elemental carbon (40–45 wt%), much research focussed on effectively converting olive stones, as precursors, into activated carbon adsorbents. However, only a few studies have concentrated on summarising the various techniques used to produce activated carbon from olive stone. This article reviews the research undertaken on the production and application of activated carbon as an adsorbent from olive stones for wastewater treatment. Various physical, chemical and physico-chemical treatments to remove heavy metals, organics and dyes are discussed, and the resultant adsorption capacities are reported. In several cases, very high adsorption capacities are recorded. Finally, the future prospects of these materials as adsorbents are discussed, and after further development work, olive stone-derived activated carbons have great potential especially in the area of organic polluted wastewaters.

263 citations

Journal ArticleDOI
TL;DR: Results from the filtration experiments indicate a substantial variation in the feed volume that the membrane can treat before the permeate lead concentration reaches the allowable limit of 10 ppb, depending on the process parameter.

182 citations

Journal ArticleDOI
TL;DR: In this article, the authors compare the fitting ability of an oversimplified version of the Bohart-Adams model with those of the Thomas and Yoon-Nelson models, and show that a proper version of this model gives fit quality similar to those of both Thomas and Nelson models.

145 citations