Mushfika Baishakhi Upama

Bio: Mushfika Baishakhi Upama is an academic researcher from University of New South Wales. The author has contributed to research in topics: Organic solar cell & Perovskite (structure). The author has an hindex of 23, co-authored 50 publications receiving 1126 citations. Previous affiliations of Mushfika Baishakhi Upama include Bangladesh University of Engineering and Technology.

Encapsulation of Organic and Perovskite Solar Cells: A Review

Abstract: Photovoltaic is one of the promising renewable sources of power to meet the future challenge of energy need. Organic and perovskite thin film solar cells are an emerging cost-effective photovoltaic technology because of low-cost manufacturing processing and their light weight. The main barrier of commercial use of organic and perovskite solar cells is the poor stability of devices. Encapsulation of these photovoltaic devices is one of the best ways to address this stability issue and enhance the device lifetime by employing materials and structures that possess high barrier performance for oxygen and moisture. The aim of this review paper is to find different encapsulation materials and techniques for perovskite and organic solar cells according to the present understanding of reliability issues. It discusses the available encapsulate materials and their utility in limiting chemicals, such as water vapour and oxygen penetration. It also covers the mechanisms of mechanical degradation within the individual layers and solar cell as a whole, and possible obstacles to their application in both organic and perovskite solar cells. The contemporary understanding of these degradation mechanisms, their interplay, and their initiating factors (both internal and external) are also discussed.

High-Efficiency Semitransparent Organic Solar Cells with Non-Fullerene Acceptor for Window Application

Abstract: Organic solar cells possess multiple desirable traits, such as low cost, flexibility, and semitransparency, which opens up potential avenues unavailable to other solar technologies, a prime example of this being window applications. For this specific application, a delicate balance between the transmission of light through the device and power conversion efficiency (PCE), dependent on the amount of light absorbed, must be optimized. Here, we report a high-efficiency semitransparent device based on a novel fullerene-free material system. Using an active layer based on the material system PBDB-T:ITIC, optimized devices exhibited PCEs exceeding 7% while also achieving an average visible transmittance (AVT) of 25%. The concurrent demonstration of high efficiency with an AVT of 25% represents a notable step forward for semitransparent organic solar cells. Additionally, the influence of the active layer thickness on the color rendering properties of these cells was studied. Optimization of the active layer thic...

Bilayer SnO2 as Electron Transport Layer for Highly Efficient Perovskite Solar Cells

Abstract: Tin oxide (SnO2) has been reported as a promising electron transport layer (ETL) for planar heterojunction perovskite solar cells (PSCs). This work reports a low temperature solution-processed bila...

Effects of Hydroiodic Acid Concentration on the Properties of CsPbI3 Perovskite Solar Cells

Abstract: Inorganic cesium lead triiodide (CsPbI3) perovskite materials are becoming increasingly attractive for use in perovskite/silicon tandem solar cells, due to their almost ideal band gap energy (Eg) of about 1.7 eV. To be useful as photovoltaic absorbers, the CsPbI3 must form the cubic or black phase (α-CsPbI3). To do so at relatively low temperatures, hydroiodic acid (HI) is required as a solution additive. This paper demonstrates CsPbI3 perovskite solar cells with an efficiency of 6.44%, formed using a HI concentration of 36 μL/mL. This value is higher than the previous most commonly used HI additive concentration. Herein, by undertaking a systematic study of the HI concentration, we demonstrate that the structural, morphological, optical, and electrical properties of CsPbI3 solar cells, processed with this HI additive concentration, are superior.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Consensus statement for stability assessment and reporting for perovskite photovoltaics based on ISOS procedures

Abstract: Improving the long-term stability of perovskite solar cells is critical to the deployment of this technology. Despite the great emphasis laid on stability-related investigations, publications lack consistency in experimental procedures and parameters reported. It is therefore challenging to reproduce and compare results and thereby develop a deep understanding of degradation mechanisms. Here, we report a consensus between researchers in the field on procedures for testing perovskite solar cell stability, which are based on the International Summit on Organic Photovoltaic Stability (ISOS) protocols. We propose additional procedures to account for properties specific to PSCs such as ion redistribution under electric fields, reversible degradation and to distinguish ambient-induced degradation from other stress factors. These protocols are not intended as a replacement of the existing qualification standards, but rather they aim to unify the stability assessment and to understand failure modes. Finally, we identify key procedural information which we suggest reporting in publications to improve reproducibility and enable large data set analysis. Reliability of stability data for perovskite solar cells is undermined by a lack of consistency in the test conditions and reporting. This Consensus Statement outlines practices for testing and reporting stability tailoring ISOS protocols for perovskite devices.

Flexible and Semitransparent Organic Solar Cells

Abstract: Flexible and semitransparent organic solar cells (OSCs) have been regarded as the most promising photovoltaic devices for the application of OSCs in wearable energy resources and building-integrated photovoltaics. Therefore, the flexible and semitransparent OSCs have developed rapidly in recent years through the synergistic efforts in developing novel flexible bottom or top transparent electrodes, designing and synthesizing high performance photoactive layer and low temperature processed electrode buffer layer materials, and device architecture engineering. To date, the highest power conversion efficiencies have reached over 10% of the flexible OSCs and 7.7% with average visible transmittance of 37% for the semitransparent OSCs. Here, a comprehensive overview of recent research progresses and perspectives on the related materials and devices of the flexible and semitransparent OSCs is provided.

Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications.

Abstract: Over the last several years, inorganic–organic hybrid perovskites have shown dramatic achievements in photovoltaic performance and device stability. Despite the significant progress in photovoltaic application, an in-depth understanding of the fundamentals of precursor solution chemistry is still lacking. In this review, the fundamental background knowledge of nucleation and crystal growth processes in solution including the LaMer model and Ostwald ripening process is described. This review article also highlights the recent progress in precursor-coordinating molecule interaction in solution along with the role of anti-solvent in the solvent engineering process to control nucleation and crystal growth. Moreover, chemical pathways from precursor solution to perovskite film formation are given. This represents identification of the intermediate phase induced by precursor-coordinating molecule interaction and responsible intermediate species for uniform and dense perovskite film formation. Further to the description of chemical phenomena in solution, the contemporary progress in chemical precursor composition is also provided to comprehend the current research approaches to further enhance photovoltaic performance and device stability. On the basis of the critical and comprehensive review, we provide some perspectives to further achieve high-performance perovskite solar cells with long-term device stability through precisely controlled nucleation and crystal growth in precursor solution.