Myounggon Kang

Bio: Myounggon Kang is an academic researcher from Korea National University of Transportation. The author has contributed to research in topics: NAND gate & Flash memory. The author has an hindex of 19, co-authored 141 publications receiving 1762 citations. Previous affiliations of Myounggon Kang include Seoul National University & Korea University.

Stacked nanosheet gate-all-around transistor to enable scaling beyond FinFET

Abstract: In this paper, for the first time we demonstrate that horizontally stacked gate-all-around (GAA) Nanosheet structure is a good candidate for the replacement of FinFET at the 5nm technology node and beyond. It offers increased W eff per active footprint and better performance compared to FinFET, and with a less complex patterning strategy, leveraging EUV lithography. Good electrostatics are reported at L g =12nm and aggressive 44/48nm CPP (Contacted Poly Pitch) ground rules. We demonstrate work function metal (WFM) replacement and multiple threshold voltages, compatible with aggressive sheet to sheet spacing for wide stacked sheets. Stiction of sheets in long-channel devices is eliminated. Dielectric isolation is shown on standard bulk substrate for sub-sheet leakage control. Wrap-around contact (WAC) is evaluated for extrinsic resistance reduction.

A Zeroing Cell-to-Cell Interference Page Architecture With Temporary LSB Storing and Parallel MSB Program Scheme for MLC NAND Flash Memories

Abstract: A new MLC NAND page architecture is presented as a breakthrough solution for sub-40-nm MLC NAND flash memories and beyond. To reduce cell-to-cell interference which is well known as the most critical scaling barrier for NAND flash memories, a novel page architecture including temporary LSB storing program and parallel MSB program schemes is proposed. A BL voltage modulated ISPP scheme was used as parallel MSB programming in order to reduce cell-to-cell interference caused by the order in which the cells are programmed. By adopting the proposed page architecture, the number of neighbor cells that are programmed after programming a selected cell in BL direction as well as their amount of T/th shift during programming can be suppressed largely without increasing memory array size. Compared to conventional architecture it leads to a reduction of BL-BL cell-to-cell interference by almost 100%, and of WL-WL and diagonal cell-to-cell interferences by 50% at the 60 nm technology node. The proposed architecture enables also to improve average MLC program speed performance by 11% compared with conventional architecture, thanks to its fast LSB program performance.

Three-Dimensional nand Flash Architecture Design Based on Single-Crystalline STacked ARray

Abstract: Various critical issues related with 3-D stacked nand Flash memory are examined in this paper. Our single-crystalline STacked ARray (STAR) has many advantages such as better scalability, possibility of single-crystal channel, less sensitivity to 3-D interference, stable virtual source/drain characteristic, and more extendability over other stacked structures. With STAR, we proposed a unit 3-D structure, i.e., “building.” Then, using this new component, 3-D block and full chip architecture are successfully designed. For the first time, the structure and operation methods of the “full” array are considered. The fully designed 3-D nand Flash architecture will be the novel solution of reliable 3-D stacked nand Flash memory for terabit density.

Nonvolatile memory device and related programming method

Abstract: A nonvolatile memory device comprises a memory cell array comprising a plurality of memory blocks each divided into a plurality of regions, and a control logic component. The control logic component selects a memory block to be programmed based on program/erase cycles of the memory blocks, and selects a program rule used to program the regions of the selected memory block.

A simple parameter extraction method of spiral on-chip inductors

Abstract: Accurate measurement and parameter extraction for spiral inductors are very important in monolithic microwave integrated circuit (MMIC) design. In this paper, we have proposed an easy and simple model parameter extraction method of wide-band on-chip inductor. The simple extraction methodology is applied to extract parameters from the measured S-parameters of spiral inductors fabricated with 0.18-/spl mu/m CMOS technology. Model prediction shows excellent agreement with the measured data over a wide frequency region. Also, the model can be easily integrated in SPICE-compatible simulators because all the elements are frequency independent. This method will provide practical and useful circuit parameters for MMIC design.

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Graphene and two-dimensional materials for silicon technology.

Abstract: The development of silicon semiconductor technology has produced breakthroughs in electronics—from the microprocessor in the late 1960s to early 1970s, to automation, computers and smartphones—by downscaling the physical size of devices and wires to the nanometre regime. Now, graphene and related two-dimensional (2D) materials offer prospects of unprecedented advances in device performance at the atomic limit, and a synergistic combination of 2D materials with silicon chips promises a heterogeneous platform to deliver massively enhanced potential based on silicon technology. Integration is achieved via three-dimensional monolithic construction of multifunctional high-rise 2D silicon chips, enabling enhanced performance by exploiting the vertical direction and the functional diversification of the silicon platform for applications in opto-electronics and sensing. Here we review the opportunities, progress and challenges of integrating atomically thin materials with silicon-based nanosystems, and also consider the prospects for computational and non-computational applications. Progress in integrating atomically thin two-dimensional materials with silicon-based technology is reviewed, together with the associated opportunities and challenges, and a roadmap for future applications is presented.

Overview of emerging nonvolatile memory technologies

Abstract: Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new class of memory technologies and scaling of scientific procedures based on an investigation of recent progress in advanced Flash memory devices.

8 Gb 3-D DDR3 DRAM Using Through-Silicon-Via Technology

Abstract: An 8 Gb 4-stack 3-D DDR3 DRAM with through-Si-via is presented which overcomes the limits of conventional modules. A master-slave architecture is proposed which decreases the standby and active power by 50 and 25%, respectively. It also increases the I/O speed to > 1600 Mb/s for 4 rank/module and 2 module/channel case since the master isolates all chip I/O loadings from the channel. Statistical analysis shows that the proposed TSV check and repair scheme can increase the assembly yield up to 98%. By providing extra VDD/VSS edge pads, power noise is reduced to < 100 mV even if all 4 ranks are refreshed every clock cycle consecutively.