Myung-Ho Bae

Bio: Myung-Ho Bae is an academic researcher from Korea Research Institute of Standards and Science. The author has contributed to research in topics: Graphene & Joule heating. The author has an hindex of 6, co-authored 8 publications receiving 839 citations. Previous affiliations of Myung-Ho Bae include University of Illinois at Urbana–Champaign & Korea University of Science and Technology.

Mobility and saturation velocity in graphene on SiO2

Abstract: We examine mobility and saturation velocity in graphene on SiO2 above room temperature (300–500 K) and at high fields (∼1 V/μm). Data are analyzed with practical models including gated carriers, thermal generation, “puddle” charge, and Joule heating. Both mobility and saturation velocity decrease with rising temperature above 300 K, and with rising carrier density above 2×1012 cm−2. Saturation velocity is >3×107 cm/s at low carrier density, and remains greater than in Si up to 1.2×1013 cm−2. Transport appears primarily limited by the SiO2 substrate but results suggest intrinsic graphene saturation velocity could be more than twice that observed here.

Mobility and Saturation Velocity in Graphene on SiO2

Abstract: We examine mobility and saturation velocity in graphene on SiO2 above room temperature (300-500 K) and at high fields (~1 V/um). Data are analyzed with practical models including gated carriers, thermal generation, "puddle" charge, and Joule heating. Both mobility and saturation velocity decrease with rising temperature above 300 K, and with rising carrier density above 2x10^12 cm^-2. Saturation velocity is >3x10^7 cm/s at low carrier density, and remains greater than in Si up to 1.2x10^13 cm^-2. Transport appears primarily limited by the SiO2 substrate, but results suggest intrinsic graphene saturation velocity could be more than twice that observed here.

Role of Remote Interfacial Phonon (RIP) Scattering in Heat Transport Across Graphene/SiO2 Interfaces

Abstract: Heat transfer across interfaces of graphene and polar dielectrics (e.g., SiO2) could be mediated by direct phonon coupling, as well as electronic coupling with remote interfacial phonons (RIPs). To understand the relative contribution of each component, we develop a new pump–probe technique called voltage-modulated thermoreflectance (VMTR) to accurately measure the change of interfacial thermal conductance under an electrostatic field. We employed VMTR on top gates of graphene field-effect transistors and find that the thermal conductance of SiO2/graphene/SiO2 interfaces increases by up to ΔG ≈ 0.8 MW m–2 K–1 under electrostatic fields of <0.2 V nm–1. We propose two possible explanations for the small observed ΔG. First, because the applied electrostatic field induces charge carriers in graphene, our VMTR measurements could originate from heat transfer between the charge carriers in graphene and RIPs in SiO2. Second, the increase in heat conduction could be caused by better conformity of graphene interfac...

Energy dissipation mechanism revealed by spatially resolved Raman thermometry of graphene/hexagonal boron nitride heterostructure devices

Abstract: Understanding the energy transport by charge carriers and phonons in two-dimensional (2D) van der Waals heterostructures is essential for the development of future energy-efficient 2D nanoelectronics. Here, we performed in situ spatially resolved Raman thermometry on an electrically biased graphene channel and its hBN substrate to study the energy dissipation mechanism in graphene/hBN heterostructures. By comparing the temperature profile along the biased graphene channel with that along the hBN substrate, we found that the thermal boundary resistance between the graphene and hBN was in the range of (1–2) 10−7 m2 K W−1 from ~100 °C to the onset of graphene break-down at ~600 °C in air. Consideration of an electro-thermal transport model together with the Raman thermometry conducted in air showed that a doping effect occurred under a strong electric field played a crucial role in the energy dissipation of the graphene/hBN device up to T ~ 600 °C.

Substrate-supported thermometry platform for nanomaterials like graphene, nanotubes, and nanowires

Abstract: We demonstrate a substrate-supported thermometry platform to measure thermal conduction in nanomaterials like graphene, with no need to suspend them. We use three-dimensional simulations and careful uncertainty analysis to optimize the platform geometry and to obtain the sample thermal conductivity. The lowest thermal sheet conductance that can be sensed with <50% error is ∼25 nWK−1 at room temperature, indicating applicability of this platform to graphene or polymer thin films, nanotube or nanowire arrays, even a single Si nanowire. The platform can also be extended to plastic substrates, and could find wide applicability in circumstances where fabrication challenges and low yield associated with suspended platforms must be avoided.

Electronics based on two-dimensional materials

Abstract: The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Thermal properties of graphene: Fundamentals and applications

Abstract: Graphene is a two-dimensional (2D) material with over 100-fold anisotropy of heat flow between the in-plane and out-of-plane directions. High in-plane thermal conductivity is due to covalent sp2 bonding between carbon atoms, whereas out-of-plane heat flow is limited by weak van der Waals coupling. Herein, we review the thermal properties of graphene, including its specific heat and thermal conductivity (from diffusive to ballistic limits) and the influence of substrates, defects, and other atomic modifications. We also highlight practical applications in which the thermal properties of graphene play a role. For instance, graphene transistors and interconnects benefit from the high in-plane thermal conductivity, up to a certain channel length. However, weak thermal coupling with substrates implies that interfaces and contacts remain significant dissipation bottlenecks. Heat flow in graphene or graphene composites could also be tunable through a variety of means, including phonon scattering by substrates, edges or interfaces. Ultimately, the unusual thermal properties of graphene stem from its 2D nature, forming a rich playground for new discoveries of heat flow physics and potentially leading to novel thermal management applications.

Thermal properties of graphene: Fundamentals and applications

Abstract: Graphene is a two-dimensional (2D) material with over 100-fold anisotropy of heat flow between the in-plane and out-of-plane directions. High in-plane thermal conductivity is due to covalent sp2 bonding between carbon atoms, whereas out-of-plane heat flow is limited by weak van der Waals coupling. Herein, we review the thermal properties of graphene, including its specific heat and thermal conductivity (from diffusive to ballistic limits) and the influence of substrates, defects, and other atomic modifications. We also highlight practical applications in which the thermal properties of graphene play a role. For instance, graphene transistors and interconnects benefit from the high in-plane thermal conductivity, up to a certain channel length. However, weak thermal coupling with substrates implies that interfaces and contacts remain significant dissipation bottlenecks. Heat flow in graphene or graphene composites could also be tunable through a variety of means, including phonon scattering by substrates, edges, or interfaces. Ultimately, the unusual thermal properties of graphene stem from its 2D nature, forming a rich playground for new discoveries of heat-flow physics and potentially leading to novel thermal management applications.

Photocurrent generation with two-dimensional van der Waals semiconductors.

Abstract: Two-dimensional (2D) materials have attracted a great deal of interest in recent years. This family of materials allows for the realization of versatile electronic devices and holds promise for next-generation (opto)electronics. Their electronic properties strongly depend on the number of layers, making them interesting from a fundamental standpoint. For electronic applications, semiconducting 2D materials benefit from sizable mobilities and large on/off ratios, due to the large modulation achievable via the gate field-effect. Moreover, being mechanically strong and flexible, these materials can withstand large strain (>10%) before rupture, making them interesting for strain engineering and flexible devices. Even in their single layer form, semiconducting 2D materials have demonstrated efficient light absorption, enabling large responsivity in photodetectors. Therefore, semiconducting layered 2D materials are strong candidates for optoelectronic applications, especially for photodetection. Here, we review the state-of-the-art in photodetectors based on semiconducting 2D materials, focusing on the transition metal dichalcogenides, novel van der Waals materials, black phosphorus, and heterostructures.

Experimental Review of Graphene

Abstract: This review examines the properties of graphene from an experimental perspective. The intent is to review the most important experimental results at a level of detail appropriate for new graduate students who are interested in a general overview of the fascinating properties of graphene. While some introductory theoretical concepts are provided, including a discussion of the electronic band structure and phonon dispersion, the main emphasis is on describing relevant experiments and important results as well as some of the novel applications of graphene. In particular, this review covers graphene synthesis and characterization, field-effect behavior, electronic transport properties, magnetotransport, integer and fractional quantum Hall effects, mechanical properties, transistors, optoelectronics, graphene-based sensors, and biosensors. This approach attempts to highlight both the means by which the current understanding of graphene has come about and some tools for future contributions.