scispace - formally typeset
Search or ask a question
Author

N. Peranio

Bio: N. Peranio is an academic researcher from University of Tübingen. The author has contributed to research in topics: Thin film & Thermoelectric effect. The author has an hindex of 15, co-authored 34 publications receiving 1174 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors provide a detailed account of these improvements, focusing specifically on microstructure evolution during processing, and expander expansion during the fabrication of dual-phase alloys.
Abstract: Dual-phase (DP) steel is the flagship of advanced high-strength steels, which were the first among various candidate alloy systems to find application in weight-reduced automotive components. On the one hand, this is a metallurgical success story: Lean alloying and simple thermomechanical treatment enable use of less material to accomplish more performance while complying with demanding environmental and economic constraints. On the other hand, the enormous literature on DP steels demonstrates the immense complexity of microstructure physics in multiphase alloys: Roughly 50 years after the first reports on ferrite-martensite steels, there are still various open scientific questions. Fortunately, the last decades witnessed enormous advances in the development of enabling experimental and simulation techniques, significantly improving the understanding of DP steels. This review provides a detailed account of these improvements, focusing specifically on (a) microstructure evolution during processing, (b) exp...

438 citations

Journal ArticleDOI
TL;DR: In this article, the influence of various fillers on the physical properties of triple and multifilled n-type skutterudites with the nominal composition (R 0.33 Ba 0.50 ) 0.35 Co 4 Sb 12.3 ) was investigated.

241 citations

Journal ArticleDOI
TL;DR: In this article, Bi2Te3 thin and superlattices were grown epitaxially by molecular beam epitaxy on BaF2 substrates with periods of 12 and 6nm, respectively.
Abstract: Multi-quantum-well structures of Bi2Te3 are predicted to have a high thermoelectric figure of merit ZT. Bi2Te3 thin films and Bi2Te3∕Bi2(Te0.88Se0.12)3 superlattices (SLs) were grown epitaxially by molecular beam epitaxy on BaF2 substrates with periods of 12 and 6nm, respectively. Reflection high-energy electron diffraction confirmed a layer-by-layer growth, x-ray diffraction yielded the lattice parameters and SL periods and proved epitaxial growth. The in-plane transport coefficients were measured and the thin films and SL had power factors between 28 and 35μW∕cmK2. The lattice thermal conductivity varied between 1.60W∕mK for Bi2Te3 thin films and 1.01W∕mK for a 10nm SL. The best figures of merit ZT were achieved for the SL; however, the values are slightly smaller than those in bulk materials. Thin films and superlattices were investigated in plan view and cross section by transmission electron microscopy. In the Bi2Te3 thin film and SL the dislocation density was found to be 2×1010cm−2. Bending of the ...

143 citations

Journal ArticleDOI
TL;DR: In this article, structural and transport properties of p-type skutterudites with the nominal composition DD0.7Fe2.7Co1.3Sb11.8Sn0.3, which were prepared by a rather fast reaction-annealing-melting technique.

97 citations

Journal ArticleDOI
TL;DR: In this paper, Sb 2 Te 3 and Bi 2 Te3 thin films were grown at room temperature on SiO 2 and BaF 2 substrates using molecular beam epitaxy and the layer structure in the as-deposited films was confirmed by X-ray diffraction.

52 citations


Cited by
More filters
Journal ArticleDOI
09 Jun 2016-Nature
TL;DR: In this metastability-engineering strategy, a transformation-induced plasticity-assisted, dual-phase high-entropy alloy (TRIP-DP-HEA) is designed, which combines the best of two worlds: extensive hardening due to the decreased phase stability known from advanced steels and massive solid-solution strengthening of high-ENTropy alloys.
Abstract: Metals have been mankind's most essential materials for thousands of years; however, their use is affected by ecological and economical concerns Alloys with higher strength and ductility could alleviate some of these concerns by reducing weight and improving energy efficiency However, most metallurgical mechanisms for increasing strength lead to ductility loss, an effect referred to as the strength-ductility trade-off Here we present a metastability-engineering strategy in which we design nanostructured, bulk high-entropy alloys with multiple compositionally equivalent high-entropy phases High-entropy alloys were originally proposed to benefit from phase stabilization through entropy maximization Yet here, motivated by recent work that relaxes the strict restrictions on high-entropy alloy compositions by demonstrating the weakness of this connection, the concept is overturned We decrease phase stability to achieve two key benefits: interface hardening due to a dual-phase microstructure (resulting from reduced thermal stability of the high-temperature phase); and transformation-induced hardening (resulting from the reduced mechanical stability of the room-temperature phase) This combines the best of two worlds: extensive hardening due to the decreased phase stability known from advanced steels and massive solid-solution strengthening of high-entropy alloys In our transformation-induced plasticity-assisted, dual-phase high-entropy alloy (TRIP-DP-HEA), these two contributions lead respectively to enhanced trans-grain and inter-grain slip resistance, and hence, increased strength Moreover, the increased strain hardening capacity that is enabled by dislocation hardening of the stable phase and transformation-induced hardening of the metastable phase produces increased ductility This combined increase in strength and ductility distinguishes the TRIP-DP-HEA alloy from other recently developed structural materials This metastability-engineering strategy should thus usefully guide design in the near-infinite compositional space of high-entropy alloys

2,403 citations

Journal ArticleDOI
29 Sep 2017-Science
TL;DR: The mechanisms and strategies for improving thermoelectric efficiency are reviewed and how to report material performance is discussed, as well as how to develop high-performance materials out of nontoxic and earth-abundant elements.
Abstract: BACKGROUND Heat and electricity are two forms of energy that are at opposite ends of a spectrum Heat is ubiquitous, but with low quality, whereas electricity is versatile, but its production is demanding Thermoelectrics offers a simple and environmentally friendly solution for direct heat-to-electricity conversion A thermoelectric (TE) device can directly convert heat emanating from the Sun, radioisotopes, automobiles, industrial sectors, or even the human body to electricity Electricity also can drive a TE device to work as a solid-state heat pump for distributed spot-size refrigeration TE devices are free of moving parts and feasible for miniaturization, run quietly, and do not emit greenhouse gasses The full potential of TE devices may be unleashed by working in tandem with other energy-conversion technologies Thermoelectrics found niche applications in the 20th century, especially where efficiency was of a lower priority than energy availability and reliability Broader (beyond niche) application of thermoelectrics in the 21st century requires developing higher-performance materials The figure of merit, ZT, is the primary measure of material performance Enhancing the ZT requires optimizing the adversely interdependent electrical resistivity, Seebeck coefficient, and thermal conductivity, as a group On the microscopic level, high material performance stems from a delicate concert among trade-offs between phase stability and instability, structural order and disorder, bond covalency and ionicity, band convergence and splitting, itinerant and localized electronic states, and carrier mobility and effective mass ADVANCES Innovative transport mechanisms are the fountain of youth of TE materials research In the past two decades, many potentially paradigm-changing mechanisms were identified, eg, resonant levels, modulation doping, band convergence, classical and quantum size effects, anharmonicity, the Rashba effect, the spin Seebeck effect, and topological states These mechanisms embody the current states of understanding and manipulating the interplay among the charge, lattice, orbital, and spin degrees of freedom in TE materials Many strategies were successfully implemented in a wide range of materials, eg, V2VI3 compounds, VVI compounds, filled skutterudites and clathrates, half-Heusler alloys, diamond-like structured compounds, Zintl phases, oxides and mixed-anion oxides, silicides, transition metal chalcogenides, and organic materials In addition, advanced material synthesis and processing techniques, for example, melt spinning, self-sustaining heating synthesis, and field-assisted sintering, helped reach a much broader phase space where traditional metallurgy and melt-growth recipes fell short Given the ubiquity of heat and the modular aspects of TE devices, these advances ensure that thermoelectrics plays an important role as part of a solutions package to address our global energy needs OUTLOOK The emerging roles of spin and orbital states, new breakthroughs in multiscale defect engineering, and controlled anharmonicity may hold the key to developing next generation TE materials To accelerate exploring the broad phase space of higher multinary compounds, we need a synergy of theory, machine learning, three-dimensional printing, and fast experimental characterizations We expect this synergy to help refine current materials selection and make TE materials research more data driven We also expect increasing efforts to develop high-performance materials out of nontoxic and earth-abundant elements The desire to move away from Freon and other refrigerant-based cooling should shift TE materials research from power generation to solid-state refrigeration International round-robin measurements to cross-check the high ZT values of emerging materials will help identify those that hold the most promise We hope the renewable energy landscape will be reshaped if the recent trend of progress continues into the foreseeable future

1,457 citations

Journal ArticleDOI
03 Apr 2015-Science
TL;DR: A dramatic improvement of efficiency is shown in bismuth telluride samples by quickly squeezing out excess liquid during compaction, which presents an attractive path forward for thermoelectrics.
Abstract: The widespread use of thermoelectric technology is constrained by a relatively low conversion efficiency of the bulk alloys, which is evaluated in terms of a dimensionless figure of merit ( zT ). The zT of bulk alloys can be improved by reducing lattice thermal conductivity through grain boundary and point-defect scattering, which target low- and high-frequency phonons. Dense dislocation arrays formed at low-energy grain boundaries by liquid-phase compaction in Bi 0.5 Sb 1.5 Te 3 (bismuth antimony telluride) effectively scatter midfrequency phonons, leading to a substantially lower lattice thermal conductivity. Full-spectrum phonon scattering with minimal charge-carrier scattering dramatically improved the zT to 1.86 ± 0.15 at 320 kelvin (K). Further, a thermoelectric cooler confirmed the performance with a maximum temperature difference of 81 K, which is much higher than current commercial Peltier cooling devices.

1,429 citations

Journal ArticleDOI
TL;DR: Novel concepts and paradigms are described here that have emerged, targeting superior TE materials and higher TE performance, including band convergence, "phonon-glass electron-crystal", multiscale phonon scattering, resonant states, anharmonicity, etc.
Abstract: The past two decades have witnessed the rapid growth of thermoelectric (TE) research. Novel concepts and paradigms are described here that have emerged, targeting superior TE materials and higher TE performance. These superior aspects include band convergence, "phonon-glass electron-crystal", multiscale phonon scattering, resonant states, anharmonicity, etc. Based on these concepts, some new TE materials with distinct features have been identified, including solids with high band degeneracy, with cages in which atoms rattle, with nanostructures at various length scales, etc. In addition, the performance of classical materials has been improved remarkably. However, the figure of merit zT of most TE materials is still lower than 2.0, generally around 1.0, due to interrelated TE properties. In order to realize an "overall zT > 2.0," it is imperative that the interrelated properties are decoupled more thoroughly, or new degrees of freedom are added to the overall optimization problem. The electrical and thermal transport must be synergistically optimized. Here, a detailed discussion about the commonly adopted strategies to optimize individual TE properties is presented. Then, four main compromises between the TE properties are elaborated from the point of view of the underlying mechanisms and decoupling strategies. Finally, some representative systems of synergistic optimization are also presented, which can serve as references for other TE materials. In conclusion, some of the newest ideas for the future are discussed.

1,014 citations

Journal ArticleDOI
TL;DR: Of the POP/plastic combinations examined Phe with PE gave the highest potential for transport to organisms, and desorption under gut conditions could be up to 30 times greater than in seawater alone.

781 citations