N. Serdar Sariciftci

Bio: N. Serdar Sariciftci is an academic researcher from University of California, Santa Barbara. The author has contributed to research in topics: Photoinduced electron transfer & Organic solar cell. The author has an hindex of 18, co-authored 31 publications receiving 4923 citations. Previous affiliations of N. Serdar Sariciftci include Eindhoven University of Technology & A. N. Nesmeyanov Institute of Organoelement Compounds.

2.5% efficient organic plastic solar cells

Abstract: We show that the power conversion efficiency of organic photovoltaic devices based on a conjugated polymer/methanofullerene blend is dramatically affected by molecular morphology. By structuring the blend to be a more intimate mixture that contains less phase segregation of methanofullerenes, and simultaneously increasing the degree of interactions between conjugated polymer chains, we have fabricated a device with a power conversion efficiency of 2.5% under AM1.5 illumination. This is a nearly threefold enhancement over previously reported values for such a device, and it approaches what is needed for the practical use of these devices for harvesting energy from sunlight.

Effect of LiF/metal electrodes on the performance of plastic solar cells

Abstract: The insertion of thin interlayers of LiF under the negative metal electrode (Al and Au) of bulk heterojunction solar cells significantly enhances the fill factor and stabilizes high open circuit voltages. Compared to devices without the LiF interfacial layer, the white light efficiencies increase by over 20% up to ηeff∼3.3%. Substitution of the LiF by another insulating interlayer SiOx results in lower overall efficiencies. In the case of a LiF/Au electrode, substantial efficiency enhancement is observed compared to a pristine Au electrode and white light efficiencies up to ηeff∼2.3% are reported.

Synthesis, photophysical properties, and photovoltaic devices of oligo(p-phenylene vinylene)-fullerene dyads

Abstract: The synthesis of a homologous series of oligo(p-phenylene vinylene)-fulleropyrrolidines (OPVn-C60, n = 1−4, where n is the number of phenyl rings) is described. The photophysical properties of these donor−acceptor dyads and the corresponding model compounds, α,ω-dimethyl-2,5-bis(2-(S)-methylbutoxy)-1,4-phenylene vinylene oligomers (OPVn, n = 2−4) and N-methylfulleropyrrolidine (MP-C60), are studied as a function of the conjugation length in solvents of different polarity and as thin films. Fast singlet energy transfer occurs after photoexcitation of the OPVn moiety of the dyads toward the fullerene moiety in an apolar solvent. Photoexcitation of the dyads in a polar solvent results in electron transfer for OPV3-C60 and OPV4-C60, and to some extent for OPV2-C60, but not for OPV1-C60. These results are compared to the results obtained for mixtures of OPVn and MP-C60 in the same solvents. The solvent-dependent change in free energy for charge separation of the donor−acceptor systems is calculated from the We...

Polymer-fullerene bulk heterojunction solar cells

Abstract: Nanostructured phase-separated blends, or bulk heterojunctions, of conjugated polymers and fullerene derivatives form a very attractive approach to large-area, solid-state organic solar cells. The key feature of these cells is that they combine easy processing from solution on a variety of substrates with good performance. Efficiencies of up to 5% in solar light have been achieved, and lifetimes are increasing to thousands of hours. Further improvements can be expected and some of the promising strategies towards that goal are presented in this article.

Extended photocurrent spectrum of a low band gap polymer in a bulk heterojunction solar cell

Abstract: A soluble low band gap polymer was synthesized and blended with a soluble fullerene derivative for the fabrication of plastic solar cells. The devices showed a remarkable harvest of photons, within the wide range of 300−900 nm, that were converted into current.

Dye-Sensitized Solar Cells

Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

Conjugated polymer-based organic solar cells

Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends

Abstract: Converting solar energy into electricity provides a much-needed solution to the energy crisis the world is facing today. Polymer solar cells have shown potential to harness solar energy in a cost-effective way. Significant efforts are underway to improve their efficiency to the level of practical applications. Here, we report highly efficient polymer solar cells based on a bulk heterojunction of polymer poly(3-hexylthiophene) and methanofullerene. Controlling the active layer growth rate results in an increased hole mobility and balanced charge transport. Together with increased absorption in the active layer, this results in much-improved device performance, particularly in external quantum efficiency. The power-conversion efficiency of 4.4% achieved here is the highest published so far for polymer-based solar cells. The solution process involved ensures that the fabrication cost remains low and the processing is simple. The high efficiency achieved in this work brings these devices one step closer to commercialization.

The path to ubiquitous and low-cost organic electronic appliances on plastic

Abstract: Organic electronics are beginning to make significant inroads into the commercial world, and if the field continues to progress at its current, rapid pace, electronics based on organic thin-film materials will soon become a mainstay of our technological existence. Already products based on active thin-film organic devices are in the market place, most notably the displays of several mobile electronic appliances. Yet the future holds even greater promise for this technology, with an entirely new generation of ultralow-cost, lightweight and even flexible electronic devices in the offing, which will perform functions traditionally accomplished using much more expensive components based on conventional semiconductor materials such as silicon.

Hybrid Nanorod-Polymer Solar Cells

Abstract: We demonstrate that semiconductor nanorods can be used to fabricate readily processed and efficient hybrid solar cells together with polymers. By controlling nanorod length, we can change the distance on which electrons are transported directly through the thin film device. Tuning the band gap by altering the nanorod radius enabled us to optimize the overlap between the absorption spectrum of the cell and the solar emission spectrum. A photovoltaic device consisting of 7-nanometer by 60-nanometer CdSe nanorods and the conjugated polymer poly-3(hexylthiophene) was assembled from solution with an external quantum efficiency of over 54% and a monochromatic power conversion efficiency of 6.9% under 0.1 milliwatt per square centimeter illumination at 515 nanometers. Under Air Mass (A.M.) 1.5 Global solar conditions, we obtained a power conversion efficiency of 1.7%.