N. Srinivasan

Bio: N. Srinivasan is an academic researcher from VIT University. The author has contributed to research in topics: Austenitic stainless steel & Electron backscatter diffraction. The author has an hindex of 8, co-authored 21 publications receiving 161 citations. Previous affiliations of N. Srinivasan include Monash University, Clayton campus & Indian Institute of Technology Bombay.

Effect of Process Parameters and Heat Input on Weld Bead Geometry of Laser Welded Titanium Ti-6Al-4V Alloy

Abstract: Laser beam welding is one of the most favorable welding technique and its importance in industry is demanding due to higher welding speeds and lower dimensions and distortions in the welds. Moreover, its high strength to weld geometries and minimal heat affected zones makes favorable for various industrial applications. In the present study, laser welding of titanium alloy was investigated to observe the effects of parameters on the bead geometry and metallurgical properties. The laser power and welding speeds were varied to identify their impact on the formation of weld geometry. The width and depth of the fusion zone is varied with welding conditions. The finer grains identified in weld zone and the width of heat affected zone was significantly changes with laser welding power. The mechanical properties of the weld joint are controlled by obtaining optimum weld bead geometry and width of the head affected zone in the welds.

Characterization of Microstructure and Mechanical Properties of AA2219-O and T6 Friction Stir Welds

Abstract: In the present study, aluminum alloy 2219 of two different heat treatment states were selected and welded using the friction stir welding process to evaluate the effect substrate on the joint properties. The microstructural observations have exhibited the difference in their characteristics between two heat treatment conditions of 2219-O and T6 conditions. The tensile strength of the AA2219-T6 joints much higher than the AA2219-O joints. Consequently, the microhardness distribution across the different zones varying with two different heat treated conditions. The failure locations and fracture surface features are revealed the significant differences among these two heat treated conditions with the change in their failure location and the fracture morphologies. The optimal welding conditions were analyzed to determine the high strength of the welds with excellent metallurgical properties of the welds.

Microstructural Evolution During Multi-Pass Friction Stir Processing of a Magnesium Alloy

Abstract: A commercial magnesium alloy was processed through multi-pass and multi-directional (unidirectional, reverse, and transverse tool movements) friction stir processing (FSP). Based on the FSP location, the dominant prior-deformation basal texture was shifted along the arc of a hypothetical ellipse. The patterns of deformation texture developments were captured by viscoplastic self-consistent modeling with appropriate velocity gradients. The simulated textures, however, had two clear deficiencies. The simulations involved shear strains of 0.8 to 1.0, significantly lower than those expected in the FSP. Even at such low shear, the simulated textures were significantly stronger. Microstructural observations also revealed the presence of ultra-fine grains with relatively weak crystallographic texture. Combinations of ultra-fine grain superplasticity followed by grain coarsening were proposed as the possible mechanism for the microstructural evolution during FSP.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

Recent Advances in Friction Stir Welding/Processing of Aluminum Alloys: Microstructural Evolution and Mechanical Properties

Abstract: Friction stir welding (FSW), a highly efficient solid-state joining technique, has been termed as “green” technology due to its energy efficiency and environment friendliness. It is an enabling technology for joining metallic materials, in particular lightweight high-strength aluminum and magnesium alloys which were classified as unweldable by traditional fusion welding. It is thus considered to be the most significant development in the area of material joining over the past two decades. Friction stir processing (FSP) was later developed based on the basic principles of FSW. FSP has been proven to be an effective and versatile metal-working technique for modifying and fabricating metallic materials. FSW/FSP of aluminum alloys has prompted considerable scientific and technological interest since it has a potential for revolutionizing the manufacturing process in the aerospace, defense, marine, automotive, and railway industries. To promote widespread applications of FSW/FSP technology and ensure t...

Current developments of nanoscale insight into corrosion protection by passive oxide films

Abstract: Oxide passive films are a key for the durability of metals and alloys components as well as a central issue in corrosion science and engineering. Herein, we discuss current developments of the nanometer and sub-nanometer scale knowledge of the barrier properties and adsorption properties of passive oxide films brought by recent model experimental and theoretical investigations. The discussed aspects include (i) the chromium enrichment and its homogeneity at the nanoscale in passive films formed on Cr-bearing alloys such as stainless steel, (ii) the corrosion properties of grain boundaries in early intergranular corrosion before penetration and propagation in the grain boundary network, and (iii) the interaction of organic inhibitor molecules with incompletely passivated metallic surfaces. In all three cases, key issues are highlighted and future developments that we consider as most relevant are identified.