Na Huang

Bio: Na Huang is an academic researcher from China University of Petroleum. The author has contributed to research in topics: Shear (geology) & Shearing (physics). The author has an hindex of 12, co-authored 18 publications receiving 425 citations. Previous affiliations of Na Huang include Shandong University of Science and Technology & Nagasaki University.

Review: Mathematical expressions for estimating equivalent permeability of rock fracture networks

Abstract: Fracture networks play a more significant role in conducting fluid flow and solute transport in fractured rock masses, comparing with that of the rock matrix. Accurate estimation of the permeability of fracture networks would help researchers and engineers better assess the performance of projects associated with fluid flow in fractured rock masses. This study provides a review of previous works that have focused on the estimation of equivalent permeability of two-dimensional (2-D) discrete fracture networks (DFNs) considering the influences of geometric properties of fractured rock masses. Mathematical expressions for the effects of nine important parameters that significantly impact on the equivalent permeability of DFNs are summarized, including (1) fracture-length distribution, (2) aperture distribution, (3) fracture surface roughness, (4) fracture dead-end, (5) number of intersections, (6) hydraulic gradient, (7) boundary stress, (8) anisotropy, and (9) scale. Recent developments of 3-D fracture networks are briefly reviewed to underline the importance of utilizing 3-D models in future research.

VALIDITY OF CUBIC LAW FOR FLUID FLOW IN A DEFORMABLE ROCK FRACTURE - eScholarship

Abstract: The validity of the cubic law for laminar flow of fluids through open fractures consisting of parallel planar plates has been established by others over a wide range of conditions with apertures ranging down to a minimum of 0.2 µm. The law may be given in simplified form by Q/Δh = C(2b)3, where Q is the flow rate, Δh is the difference in hydraulic head, C is a constant that depends on the flow geometry and fluid properties, and 2b is the fracture aperture. The validity of this law for flow in a closed fracture where the surfaces are in contact and the aperture is being decreased under stress has been investigated at room temperature by using homogeneous samples of granite, basalt, and marble. Tension fractures were artificially induced, and the laboratory setup used radial as well as straight flow geometries. Apertures ranged from 250 down to 4µm, which was the minimum size that could be attained under a normal stress of 20 MPa. The cubic law was found to be valid whether the fracture surfaces were held open or were being closed under stress, and the results are not dependent on rock type. Permeability was uniquely defined by fracture aperture and was independent of the stress history used in these investigations. The effects of deviations from the ideal parallel plate concept only cause an apparent reduction in flow and may be incorporated into the cubic law by replacing C by C/ƒ. The factor ƒ varied from 1.04 to 1.65 in these investigations. The model of a fracture that is being closed under normal stress is visualized as being controlled by the strength of the asperities that are in contact. These contact areas are able to withstand significant stresses while maintaining space for fluids to continue to flow as the fracture aperture decreases. The controlling factor is the magnitude of the aperture, and since flow depends on (2b)3, a slight change in aperture evidently can easily dominate any other change in the geometry of the flow field. Thus one does not see any noticeable shift in the correlations of our experimental results in passing from a condition where the fracture surfaces were held open to one where the surfaces were being closed under stress.

Estimation discontinuity spacing and trace length using scanline surveys

Abstract: Abstract Knowledge of the spacing and size of discontinuities in a rock mass is of considerable importance for the prediction of rock behaviour. The characteristics of discontinuities can be estimated using scanline surveys but the precision of the estimates must be obtained and the bias caused by linear sampling must be eliminated before they can validly be used. Initially, an expression is presented which gives the degree of confidence that can be assigned to the measured mean discontinuity spacing. A reduced form of this expression is obtained for cases where the discontinuity spacings follow the negative exponential distribution. The precision of discontinuity frequency and RQD estimates is also explained. The distribution of trace lengths produced by the intersection of planar discontinuities with a planar rock face is used to determine the distribution of trace lengths, the distribution of semi-trace lengths and the distribution of censored semi-trace lengths intersected by a randomly located scanline. Comparison of the actual and sampled distributions demonstrates the bias introduced by scanline sampling of trace lengths. Relations between the distributions can be used to produce analytical or graphical methods of estimating mean trace length from censored measurements at exposures of limited extent.

Experimental studies of scale effects on the shear behaviour of rock joints

Abstract: The effect of scale on the shear behaviour of joints is studied by performing direct shear tests on different sized replicas cast from various natural joint surfaces. The result show significant scale effects on both the shear strength and deformation characteristics. Scale effects are more pronounced in the case of rough, undulating joint types, whereas they are virtually absent for planar joints. The key factor is the involvement of different asperity sizes in controlling the peak behaviour of different lengths of joints. It is shown that as a results both the joint roughness coefficient (JRC) and the joint compression strength (JCS) reduce with increasing scale. The behaviour of multiple jointed masses with different joint spacing is also considered. It is found that despite unchanged roughness, jointed masses consisting of many small blocks have higher peak shear strength than jointed masses with larger joint spacing. These scale effects are related to the changing stiffness of a rock mass as the block size or joint spacing increases or decreases. Economic methods for obtaining scale-free estimates of shear strength are described.

Flow in Fractured Porous Media: A Review of Conceptual Models and Discretization Approaches

Abstract: The last decade has seen a strong increase of research into flows in fractured porous media, mainly related to subsurface processes but also in materials science and biological applications, as connected fractures can totally dominate flow patterns. Due to the fractures’ characteristics as approximately planar discontinuities with an extreme size-to-width ratio, they challenge standard macroscale mathematical and numerical modeling of flow based on averaging. Thus, over the last decades, various, and also fundamentally different, modeling approaches have been developed. This paper reviews common conceptual models and discretization approaches for flow in fractured porous media, with an emphasis on the dominating effects the fractures have on flow processes. In this context, the paper discusses the tight connection between physical and mathematical modeling and simulation approaches. Extensions and research challenges related to transport, multi-phase flow and fluid-solid interaction are also commented on.