Nabil Bassim

Bio: Nabil Bassim is an academic researcher from McMaster University. The author has contributed to research in topics: Thin film & Focused ion beam. The author has an hindex of 25, co-authored 165 publications receiving 2544 citations. Previous affiliations of Nabil Bassim include United States Department of the Navy & United States Naval Research Laboratory.

Low-Loss, Extreme Subdiffraction Photon Confinement via Silicon Carbide Localized Surface Phonon Polariton Resonators

Abstract: Plasmonics provides great promise for nanophotonic applications. However, the high optical losses inherent in metal-based plasmonic systems have limited progress. Thus, it is critical to identify alternative low-loss materials. One alternative is polar dielectrics that support surface phonon polariton (SPhP) modes, where the confinement of infrared light is aided by optical phonons. Using fabricated 6H-silicon carbide nanopillar antenna arrays, we report on the observation of subdiffraction, localized SPhP resonances. They exhibit a dipolar resonance transverse to the nanopillar axis and a monopolar resonance associated with the longitudinal axis dependent upon the SiC substrate. Both exhibit exceptionally narrow linewidths (7–24 cm–1), with quality factors of 40–135, which exceed the theoretical limit of plasmonic systems, with extreme subwavelength confinement of (λres3/Veff)1/3 = 50–200. Under certain conditions, the modes are Raman-active, enabling their study in the visible spectral range. These obse...

Plasmonic Nanopillar Arrays for Large-Area, High-Enhancement Surface-Enhanced Raman Scattering Sensors

Abstract: Efforts to create reproducible surface-enhanced Raman scattering (SERS)-based chemical and biological sensors has been hindered by difficulties in fabricating large-area SERS-active substrates with a uniform, reproducible SERS response that still provides sufficient enhancement for easy detection. Here we report on periodic arrays of Au-capped, vertically aligned silicon nanopillars that are embedded in a Au plane upon a Si substrate. We illustrate that these arrays are ideal for use as SERS sensor templates, in that they provide large, uniform and reproducible average enhancement factors up to ∼1.2 × 10(8) over the structure surface area. We discuss the impact of the overall geometry of the structures upon the SERS response at 532, 633, and 785 nm incident laser wavelengths. Calculations of the electromagnetic field distributions and intensities within such structures were performed and both the wavelength dependence of the predicted SERS response and the field distribution within the nanopillar structure are discussed and support the experimental results we report.

Evidence for interstellar origin of seven dust particles collected by the Stardust spacecraft

Abstract: Seven particles captured by the Stardust Interstellar Dust Collector and returned to Earth for laboratory analysis have features consistent with an origin in the contemporary interstellar dust stream. More than 50 spacecraft debris particles were also identified. The interstellar dust candidates are readily distinguished from debris impacts on the basis of elemental composition and/or impact trajectory. The seven candidate interstellar particles are diverse in elemental composition, crystal structure, and size. The presence of crystalline grains and multiple iron-bearing phases, including sulfide, in some particles indicates that individual interstellar particles diverge from any one representative model of interstellar dust inferred from astronomical observations and theory.

Minimizing damage during FIB sample preparation of soft materials

Abstract: Summary Although focused ion beam (FIB) microscopy has been used successfully for milling patterns and creating ultra-thin electron and soft X-ray transparent sections of polymers and other soft materials, little has been documented regarding FIB-induced damage of these materials beyond qualitative evaluations of microstructure. In this study, we sought to identify steps in the FIB preparation process that can cause changes in chemical composition and bonding in soft materials. The impact of various parameters in the FIB-scanning electron microscope (SEM) sample preparation process, such as final milling voltage, temperature, ion beam overlap and mechanical stability of soft samples, was evaluated using two test-case materials systems: polyacrylamide, a low melting-point polymer, and Wyodak lignite coal, a refractory organic material. We evaluated changes in carbon bonding in the samples using X-ray absorption near-edge structure spectroscopy (XANES) at the carbon K edge and compared these samples with thin sections that had been prepared mechanically using ultramicrotomy. Minor chemical changes were induced in the coal samples during FIB-SEM preparation, and little effect was observed by changing ion-beam parameters. However, polyacrylamide was particularly sensitive to irradiation by the electron beam, which drastically altered the chemistry of the sample, with the primary damage occurring as an increase in the amount of aromatic carbon bonding (C=C). Changes in temperature, final milling voltage and beam overlap led to small improvements in the quality of the specimens. We outline a series of best practices for preparing electron and soft X-ray transparent samples, with respect to preserving chemical structure and mechanical stability of soft materials using the FIB.

Recent advances in focused ion beam technology and applications

Abstract: Focused ion beam microscopes are extremely versatile and powerful instruments for materials research. These microscopes, when coupled in a system with a scanning electron microscope, offer the opportunity for novel sample imaging, sectioning, specimen preparation, three-dimensional (3D) nano- to macroscale tomography, and high resolution rapid prototyping. The ability to characterize and create materials features in a site-specific manner at nanoscale resolution has provided key insights into many materials systems. The advent of novel instrumentation, such as new ion sources that encompass more and more of the periodic table, in situ test harnesses such as cryogenic sample holders for sensitive material analyses, novel detector configurations for 3D structural, chemical, and ion contrast characterization, and robust and versatile process automation capabilities, is an exciting development for many fields of materials research.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

American Society for Testing and Materials

Abstract: The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

Remote Sensing And Image Interpretation

Abstract: Thank you very much for downloading remote sensing and image interpretation. As you may know, people have look hundreds times for their favorite novels like this remote sensing and image interpretation, but end up in malicious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they are facing with some malicious virus inside their computer. remote sensing and image interpretation is available in our digital library an online access to it is set as public so you can get it instantly. Our book servers spans in multiple countries, allowing you to get the most less latency time to download any of our books like this one. Merely said, the remote sensing and image interpretation is universally compatible with any devices to read.

Printing colour at the optical diffraction limit

Abstract: Controlling the plasmon resonance of nanodisk structures enables colour images to be printed at the ultimate resolution of 100,000 dots per inch, as viewed by bright-field microscopy.

Sub-diffractional volume-confined polaritons in the natural hyperbolic material hexagonal boron nitride

Abstract: Strongly anisotropic media, where the principal components of the dielectric tensor have opposite signs, are called hyperbolic. Such materials exhibit unique nanophotonic properties enabled by the highly directional propagation of slow-light modes localized at deeply sub-diffractional length scales. While artificial hyperbolic metamaterials have been demonstrated, they suffer from high plasmonic losses and require complex nanofabrication, which in turn induces size-dependent limitations on optical confinement. The low-loss, mid-infrared, natural hyperbolic material hexagonal boron nitride is an attractive alternative. Here we report on three-dimensionally confined 'hyperbolic polaritons' in boron nitride nanocones that support four series (up to the seventh order) modes in two spectral bands. The resonant modes obey the predicted aspect ratio dependence and exhibit high-quality factors (Q up to 283) in the strong confinement regime (up to λ/86). These observations assert hexagonal boron nitride as a promising platform for studying novel regimes of light-matter interactions and nanophotonic device engineering.