Naesung Lee

Bio: Naesung Lee is an academic researcher from Sejong University. The author has contributed to research in topics: Carbon nanotube & Field electron emission. The author has an hindex of 38, co-authored 207 publications receiving 6282 citations. Previous affiliations of Naesung Lee include Pennsylvania State University & Samsung.

Fully sealed, high-brightness carbon-nanotube field-emission display

Abstract: A fully sealed field-emission display 4.5 in. in size has been fabricated using single-wall carbon nanotube (CNT)-organic binders. The fabricated displays were fully scalable at low temperature, below 415 °C, and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1 V/μm and field emission current of 1.5 mA at 3 V/μm (J=90 μA/cm2) were observed. Brightness of 1800 cd/m2 at 3.7 V/μm was observed on the entire area of a 4.5 in. panel from the green phosphor-indium–tin–oxide glass. The fluctuation of the current was found to be about 7% over a 4.5 in. cathode area.

Controlling the diameter, growth rate, and density of vertically aligned carbon nanotubes synthesized by microwave plasma-enhanced chemical vapor deposition

Abstract: Vertically aligned carbon nanotubes were synthesized on Ni-deposited Si substrates using microwave plasma-enhanced chemical vapor deposition. The grain size of Ni thin films varied with the rf power density during the rf magnetron sputtering process. We found that the diameter, growth rate, and density of carbon nanotubes could be controlled systematically by the grain size of Ni thin films. With decreasing the grain size of Ni thin films, the diameter of the nanotubes decreased, whereas the growth rate and density increased. High-resolution transmission electron microscope images clearly demonstrated synthesized nanotubes to be multiwalled.

Electrophoresis deposition of carbon nanotubes for triode-type field emission display

Abstract: A triode-type field emission display has been fabricated using carbon nanotube emitters. Purified single walled carbon nanotubes were selectively deposited onto a cathode electrode in a triode-type structure by an electrophoresis. Emission current was modulated with gate potentials of 100–300 V. A high brightness of 1000 cd/m2 with uniform emission was obtained at 900 V at the anode and 200 V at the gate. The fluctuation of emission current was found to be less than 5% in a fully sealed field emission display. Selective deposition of carbon nanotubes by electrophoresis shows high feasibility for triode-type field emission displays.

Carbon Nanotubes--the Route Toward Applications

Abstract: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Carbon nanotubes and nanofibers in catalysis

Abstract: This review analyses the literature from the early 1990s until the beginning of 2003 and covers the use of carbon nanotubes (CNT) and nanofibers as catalysts and catalysts supports. The article is composed of three sections, the first one explains why these materials can be suitable for these applications, the second describes the different preparation methods for supporting metallic catalysts on these supports, and the last one details the catalytic results obtained with nanotubes or nanofibers based catalysts. When possible, the results were compared to those obtained on classical carbonaceous supports and explanations are proposed to clarify the different behaviors observed.

A review of water treatment membrane nanotechnologies

Abstract: Nanotechnology is being used to enhance conventional ceramic and polymeric water treatment membrane materials through various avenues. Among the numerous concepts proposed, the most promising to date include zeolitic and catalytic nanoparticle coated ceramic membranes, hybrid inorganic–organic nanocomposite membranes, and bio-inspired membranes such as hybrid protein–polymer biomimetic membranes, aligned nanotube membranes, and isoporous block copolymer membranes. A semi-quantitative ranking system was proposed considering projected performance enhancement (over state-of-the-art analogs) and state of commercial readiness. Performance enhancement was based on water permeability, solute selectivity, and operational robustness, while commercial readiness was based on known or anticipated material costs, scalability (for large scale water treatment applications), and compatibility with existing manufacturing infrastructure. Overall, bio-inspired membranes are farthest from commercial reality, but offer the most promise for performance enhancements; however, nanocomposite membranes offering significant performance enhancements are already commercially available. Zeolitic and catalytic membranes appear reasonably far from commercial reality and offer small to moderate performance enhancements. The ranking of each membrane nanotechnology is discussed along with the key commercialization hurdles for each membrane nanotechnology.