Appearing in 1st IEEE International Workshop on Sensor Net Protocols and Applications (SNPA). Anchorage, Alaska, USA. May 11, 2003. RMST: Reliable Data Transport in Sensor Networks Fred Stann, John Heidemann Abstract – Reliable data transport in wireless sensor networks is a multifaceted problem influenced by the physical, MAC, network, and transport layers. Because sensor networks are subject to strict resource constraints and are deployed by single organizations, they encourage revisiting traditional layering and are less bound by standardized placement of services such as reliability. This paper presents analysis and experiments resulting in specific recommendations for implementing reliable data transport in sensor nets. To explore reliability at the transport layer, we present RMST (Reliable Multi- Segment Transport), a new transport layer for Directed Diffusion. RMST provides guaranteed delivery and fragmentation/reassembly for applications that require them. RMST is a selective NACK-based protocol that can be configured for in-network caching and repair. Second, these energy constraints, plus relatively low wireless bandwidths, make in-network processing both feasible and desirable [3]. Third, because nodes in sensor networks are usually collaborating towards a common task, rather than representing independent users, optimization of the shared network focuses on throughput rather than fairness. Finally, because sensor networks are often deployed by a single organization with inexpensive hardware, there is less need for interoperability with existing standards. For all of these reasons, sensor networks provide an environment that encourages rethinking the structure of traditional communications protocols. The main contribution is an evaluation of the placement of reliability for data transport at different levels of the protocol stack. We consider implementing reliability in the MAC, transport layer, application, and combinations of these. We conclude that reliability is important at the MAC layer and the transport layer. MAC-level reliability is important not just to provide hop-by-hop error recovery for the transport layer, but also because it is needed for route discovery and maintenance. (This conclusion differs from previous studies in reliability for sensor nets that did not simulate routing. [4]) Second, we have developed RMST (Reliable Multi-Segment Transport), a new transport layer, in order to understand the role of in- network processing for reliable data transfer. RMST benefits from diffusion routing, adding minimal additional control traffic. RMST guarantees delivery, even when multiple hops exhibit very high error rates. 1 Introduction Wireless sensor networks provide an economical, fully distributed, sensing and computing solution for environments where conventional networks are impractical. This paper explores the design decisions related to providing reliable data transport in sensor nets. The reliable data transport problem in sensor nets is multi-faceted. The emphasis on energy conservation in sensor nets implies that poor paths should not be artificially bolstered via mechanisms such as MAC layer ARQ during route discovery and path selection [1]. Path maintenance, on the other hand, benefits from well- engineered recovery either at the MAC layer or the transport layer, or both. Recovery should not be costly however, since many applications in sensor nets are impervious to occasional packet loss, relying on the regular delivery of coarse-grained event descriptions. Other applications require loss detection and repair. These aspects of reliable data transport include the provision of guaranteed delivery and fragmentation/ reassembly of data entities larger than the network MTU. Sensor networks have different constraints than traditional wired nets. First, energy constraints are paramount in sensor networks since nodes can often not be recharged, so any wasted energy shortens their useful lifetime [2]. This work was supported by DARPA under grant DABT63-99-1-0011 as part of the SCAADS project, and was also made possible in part due to support from Intel Corporation and Xerox Corporation. Fred Stann and John Heidemann are with USC/Information Sciences Institute, 4676 Admiralty Way, Marina Del Rey, CA, USA E-mail: fstann@usc.edu, johnh@isi.edu. 2 Architectural Choices There are a number of key areas to consider when engineering reliability for sensor nets. Many current sensor networks exhibit high loss rates compared to wired networks (2% to 30% to immediate neighbors)[1,5,6]. While error detection and correction at the physical layer are important, approaches at the MAC layer and higher adapt well to the very wide range of loss rates seen in sensor networks and are the focus of this paper. MAC layer protocols can ameliorate PHY layer unreliability, and transport layers can guarantee delivery. An important question for this paper is the trade off between implementation of reliability at the MAC layer (i.e. hop to hop) vs. the Transport layer, which has traditionally been concerned with end-to-end reliability. Because sensor net applications are distributed, we also considered implementing reliability at the application layer. Our goal is to minimize the cost of repair in terms of transmission.

RMST: Reliable Data Transport in Sensor Networks

Survey on fog computing

The Internet of Things (IoT) integrates billions of smart devices that can communicate with one another with minimal human intervention. IoT is one of the fastest developing fields in the history of computing, with an estimated 50 billion devices by the end of 2020. However, the crosscutting nature of IoT systems and the multidisciplinary components involved in the deployment of such systems have introduced new security challenges. Implementing security measures, such as encryption, authentication, access control, network and application security for IoT devices and their inherent vulnerabilities is ineffective. Therefore, existing security methods should be enhanced to effectively secure the IoT ecosystem. Machine learning and deep learning (ML/DL) have advanced considerably over the last few years, and machine intelligence has transitioned from laboratory novelty to practical machinery in several important applications. Consequently, ML/DL methods are important in transforming the security of IoT systems from merely facilitating secure communication between devices to security-based intelligence systems. The goal of this work is to provide a comprehensive survey of ML methods and recent advances in DL methods that can be used to develop enhanced security methods for IoT systems. IoT security threats that are related to inherent or newly introduced threats are presented, and various potential IoT system attack surfaces and the possible threats related to each surface are discussed. We then thoroughly review ML/DL methods for IoT security and present the opportunities, advantages and shortcomings of each method. We discuss the opportunities and challenges involved in applying ML/DL to IoT security. These opportunities and challenges can serve as potential future research directions.

A Survey of Machine and Deep Learning Methods for Internet of Things (IoT) Security

Security has become the primary concern in many telecommunications industries today as risks can have high consequences. Especially, as the core and enable technologies will be associated with 5G network, the confidential information will move at all layers in future wireless systems. Several incidents revealed that the hazard encountered by an infected wireless network, not only affects the security and privacy concerns, but also impedes the complex dynamics of the communications ecosystem. Consequently, the complexity and strength of security attacks have increased in the recent past making the detection or prevention of sabotage a global challenge. From the security and privacy perspectives, this paper presents a comprehensive detail on the core and enabling technologies, which are used to build the 5G security model; network softwarization security, PHY (Physical) layer security and 5G privacy concerns, among others. Additionally, the paper includes discussion on security monitoring and management of 5G networks. This paper also evaluates the related security measures and standards of core 5G technologies by resorting to different standardization bodies and provide a brief overview of 5G standardization security forces. Furthermore, the key projects of international significance, in line with the security concerns of 5G and beyond are also presented. Finally, a future directions and open challenges section has included to encourage future research.

/pdf/a-survey-on-security-and-privacy-of-5g-technologies-1hq5wqw2pb.pdf

A Survey on Security and Privacy of 5G Technologies: Potential Solutions, Recent Advancements, and Future Directions

Wireless Sensor Networks (WSNs) constitute one of the most promising third-millennium technologies and have wide range of applications in our surrounding environment. The reason behind the vast adoption of WSNs in various applications is that they have tremendously appealing features, e.g., low production cost, low installation cost, unattended network operation, autonomous and longtime operation. WSNs have started to merge with the Internet of Things (IoT) through the introduction of Internet access capability in sensor nodes and sensing ability in Internet-connected devices. Thereby, the IoT is providing access to huge amount of data, collected by the WSNs, over the Internet. Hence, the security of IoT should start with foremost securing WSNs ahead of the other components. However, owing to the absence of a physical line-of-defense, i.e., there is no dedicated infrastructure such as gateways to watch and observe the flowing information in the network, security of WSNs along with IoT is of a big concern to the scientific community. More specifically, for the application areas in which CIA (confidentiality, integrity, availability) has prime importance, WSNs and emerging IoT technology might constitute an open avenue for the attackers. Besides, recent integration and collaboration of WSNs with IoT will open new challenges and problems in terms of security. Hence, this would be a nightmare for the individuals using these systems as well as the security administrators who are managing those networks. Therefore, a detailed review of security attacks towards WSNs and IoT, along with the techniques for prevention, detection, and mitigation of those attacks are provided in this paper. In this text, attacks are categorized and treated into mainly two parts, most or all types of attacks towards WSNs and IoT are investigated under that umbrella: “Passive Attacks” and “Active Attacks”. Understanding these attacks and their associated defense mechanisms will help paving a secure path towards the proliferation and public acceptance of IoT technology.

/pdf/security-of-the-internet-of-things-vulnerabilities-attacks-5f8nyperis.pdf

Security of the Internet of Things: Vulnerabilities, Attacks, and Countermeasures

The Internet of Things (IoT) comprises a complex network of smart devices, which frequently exchange data through the Internet. Given the significant growth of IoT as a new technological paradigm, which may involve safety-critical operations and sensitive data to be put online, its security aspect is vital. This paper studies the network security matters in the smart home, health care and transportation domains. It is possible that the interruption might occur in IoT devices during operation causing them to be in the shutdown mode. Taxonomy of security attacks within IoT networks is constructed to assist IoT developers for better awareness of the risk of security flaws so that better protections shall be incorporated.

Internet of Things (IoT): Taxonomy of security attacks

Network anomaly detection system enables to monitor computer network that behaves differently from the network protocol and it is many implemented in various domains. Yet, the problem arises where different application domains have different defining anomalies in their environment. These make a difficulty to choose the best algorithms that suit and fulfill the requirements of certain domains and it is not straightforward. Additionally, the issue of centralization that cause fatal destruction of network system when powerful malicious code injects in the system. Therefore, in this paper we want to conduct experiment using supervised Machine Learning (ML) for network anomaly detection system that low communication cost and network bandwidth minimized by using UNSW-NB15 dataset to compare their performance in term of their accuracy (effective) and processing time (efficient) for a classifier to build a model. Supervised machine learning taking account the important features by labelling it from the datasets. The best machine learning algorithm for network dataset is AODE with a comparable accuracy is 97.26% and time taken approximately 7 seconds. Also, distributed algorithm solves the issue of centralization with the accuracy and processing time still a considerable compared to a centralized algorithm even though a little drop of the accuracy and a bit longer time needed.

http://journal.portalgaruda.org/index.php/EEI/article/download/1387/1545

Effective and efficient network anomaly detection system using machine learning algorithm

The rapid growth of technologies might endanger them to various network attacks due to the nature of data which are frequently exchange their data through Internet and large-scale data that need to be handle. Moreover, network anomaly detection using machine learning faced difficulty when dealing the involvement of dataset where the number of labelled network dataset is very few in public and this caused many researchers keep used the most commonly network dataset (KDDCup99) which is not relevant to employ the machine learning (ML) algorithms for a classification. Several issues regarding these available labelled network datasets are discussed in this paper. The aim of this paper to build a network anomaly detection system using machine learning algorithms that are efficient, effective and fast processing. The finding showed that AODE algorithm is performed well in term of accuracy and processing time for binary classification towards UNSW-NB15 dataset.

https://iopscience.iop.org/article/10.1088/1742-6596/1018/1/012015/pdf

Performances of Machine Learning Algorithms for Binary Classification of Network Anomaly Detection System

The use of wireless body sensor networks (WBSN) in medical services aims at providing continuous monitoring of patients’ physiological data. However, the scarce resources in WBSN nodes limit their capabilities to cope with massive traffic during multiple, simultaneous data transmissions. This will create a high tendency for congestion, causing severe performance degradation. Congestion may lead to high number of packet loss and unbounded delay which are critical and may lead to wrong diagnosis. This paper, therefore, aims at improving this limitation using a novel congestion avoidance technique to avoid losing real-time and life-critical medical data (e.g., electrocardiogram and electroencephalography) which are vital for diagnosis. The main idea is to integrate the existing rate control scheme of relaxation theory (RT) with a method known as max-min fairness (MMF) to achieve better performance. The MMF can be accomplished using a progressive filling algorithm, which cuts-down excessive sending rates that may overwhelme the limited buffer in WBSN. This paper builds upon our prior study, which provides a preliminary analysis of RT technique in single node. Our current technique integrates the MMF phase to enhance RT performance when the transmission rates exceed certain threshold. Performance evaluation on RT-MMF technique shows remarkable performance improvements, while maintaining the desired quality of service.

A Novel Congestion Avoidance Technique for Simultaneous Real-Time Medical Data Transmission

The emergence of Internet and technologies such as Wireless Sensor Network (WSN) has created another platform of Wireless Body Area Network (WBAN) and also an ever growing new area of Internet of Thing (IoT). A WBAN offers a flexibility and mobility to health monitoring system. Most of WBAN is made up of several small and light-weighted battery-operated sensor nodes and lead to energy-constrained system. Thus, an energy-efficient WBAN system is crucially needed to make the network last longer. In addition, data reliability and data transmission is important to make the system more effective. IoT concept helps in forming an interaction of things in the surrounding as well as support data storage (database) for collected vital body sign by the sensors. In this paper, we review the concept and design of energy-efficient WBAN and contribution of IoT in healthcare monitoring system.

Naimah Yaakob

Papers

Internet of Things (IoT): Taxonomy of security attacks

Effective and efficient network anomaly detection system using machine learning algorithm

Performances of Machine Learning Algorithms for Binary Classification of Network Anomaly Detection System

A Novel Congestion Avoidance Technique for Simultaneous Real-Time Medical Data Transmission

Energy-Efficient Remote Healthcare Monitoring Using IoT: A Review of Trends and Challenges