The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

Next Generation 5G Wireless Networks: A Comprehensive Survey

This comprehensive treatment of network information theory and its applications provides the first unified coverage of both classical and recent results. With an approach that balances the introduction of new models and new coding techniques, readers are guided through Shannon's point-to-point information theory, single-hop networks, multihop networks, and extensions to distributed computing, secrecy, wireless communication, and networking. Elementary mathematical tools and techniques are used throughout, requiring only basic knowledge of probability, whilst unified proofs of coding theorems are based on a few simple lemmas, making the text accessible to newcomers. Key topics covered include successive cancellation and superposition coding, MIMO wireless communication, network coding, and cooperative relaying. Also covered are feedback and interactive communication, capacity approximations and scaling laws, and asynchronous and random access channels. This book is ideal for use in the classroom, for self-study, and as a reference for researchers and engineers in industry and academia.

Network Information Theory

Information Theory and Reliable Communication

In the near future, i.e., beyond 4G, some of the prime objectives or demands that need to be addressed are increased capacity, improved data rate, decreased latency, and better quality of service. To meet these demands, drastic improvements need to be made in cellular network architecture. This paper presents the results of a detailed survey on the fifth generation (5G) cellular network architecture and some of the key emerging technologies that are helpful in improving the architecture and meeting the demands of users. In this detailed survey, the prime focus is on the 5G cellular network architecture, massive multiple input multiple output technology, and device-to-device communication (D2D). Along with this, some of the emerging technologies that are addressed in this paper include interference management, spectrum sharing with cognitive radio, ultra-dense networks, multi-radio access technology association, full duplex radios, millimeter wave solutions for 5G cellular networks, and cloud technologies for 5G radio access networks and software defined networks. In this paper, a general probable 5G cellular network architecture is proposed, which shows that D2D, small cell access points, network cloud, and the Internet of Things can be a part of 5G cellular network architecture. A detailed survey is included regarding current research projects being conducted in different countries by research groups and institutions that are working on 5G technologies.

A Survey of 5G Network: Architecture and Emerging Technologies

There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

In this paper, a Gaussian two-way relay channel, where two source nodes exchange messages with each other through a relay, is considered. We assume that all nodes operate in full-duplex mode and there is no direct channel between the source nodes. We propose an achievable scheme composed of nested lattice codes for the uplink and structured binning for the downlink. Unlike conventional nested lattice codes, our codes utilize two different shaping lattices for source nodes based on a three-stage lattice partition chain, which is a key ingredient for producing the best gap-to-capacity results to date. Specifically, for all channel parameters, the achievable rate region of our scheme is within 1/2 bit from the capacity region for each user and its sum rate is within log3/2 bit from the sum capacity.

Capacity of the Gaussian Two-Way Relay Channel to Within ${1\over 2}$ Bit

In this paper, a Gaussian two-way relay channel, where two source nodes exchange messages with each other through a relay, is considered. We assume that all nodes operate in full-duplex mode and there is no direct channel between the source nodes. We propose an achievable scheme composed of nested lattice codes for the uplink and structured binning for the downlink. We show that the scheme achieves within 1/2 bit from the cut-set bound for all channel parameters and becomes asymptotically optimal as the signal to noise ratios increase.

Capacity of the Gaussian Two-way Relay Channel to within 1/2 Bit

As 4G cellular systems densify their cell deployment, co-channel interference becomes a major source of obstacles to cell throughput improvement. In addition, cell edge users suffer more from co-channel interference, which may govern end users? experiences. Although some network-side solutions for co-channel interference management have been introduced in current 4G standards, it turns out that most of those solutions yield only meager gains in realistic cellular environments. In this article, we pay attention to recent advances in the network information theory and discuss the benefits of UE-side approaches. Based on this understanding, we provide our vision on advanced interference management for 5G cellular systems: network-side interference management needs to be complemented by UE-side interference management to realize true factor-one resource reuse. We also discuss practical challenges to deploy advanced interference management and their implications on 5G system design. Prospective gains of advanced interference management are demonstrated, and it is shown that the benefits of advanced receivers can be well exploited if 5G cellular networks employ elaborated joint scheduling.

Advanced interference management for 5G cellular networks

We provide achievable rate regions for two-way relay channels (TRC). At first, for a binary TRC, we show that the subspace-sharing of linear codes can achieve the capacity region. And, for a Gaussian TRC, we propose the subset-sharing of lattice codes. In some cases, the proposed lattice coding scheme can achieve within 1/2-bit the capacity and is asymptotically optimal at high signal-to-noise ratio (SNR) regimes.

Capacity Bounds for Two-Way Relay Channels

In this paper, we consider a class of single-source multicast relay networks. We assume that all outgoing channels of a node in the network to its neighbors are orthogonal while the incoming signals from its neighbors can interfere with each other. We first focus on Gaussian relay networks with interference and find an achievable rate using a lattice coding scheme. We show that the achievable rate of our scheme is within a constant bit gap from the information theoretic cut-set bound, where the constant depends only on the network topology, but not on the transmit power, noise variance, and channel gains. This is similar to a recent result by Avestimehr, Diggavi, and Tse, who showed an approximate capacity characterization for general Gaussian relay networks. However, our achievability uses a structured code instead of a random one. Using the idea used in the Gaussian case, we also consider a linear finite-field symmetric network with interference and characterize its capacity using a linear coding scheme.

Nam Wooseok

Papers

Capacity of the Gaussian Two-Way Relay Channel to Within ${1\over 2}$ Bit

Capacity of the Gaussian Two-way Relay Channel to within 1/2 Bit

Advanced interference management for 5G cellular networks

Capacity Bounds for Two-Way Relay Channels

Nested Lattice Codes for Gaussian Relay Networks With Interference