Nathan S. Lewis

Bio: Nathan S. Lewis is an academic researcher from California Institute of Technology. The author has contributed to research in topics: Semiconductor & Silicon. The author has an hindex of 112, co-authored 720 publications receiving 64808 citations. Previous affiliations of Nathan S. Lewis include Lawrence Berkeley National Laboratory & Massachusetts Institute of Technology.

A Perspective on Forward Research and Development Paths for Cost‐Effective Solar Energy Utilization

Abstract: Solar electricity has long been recognized as a potential energy source that holds great promise. Several approaches towards converting sunlight into energy are elaborated in this Viewpoint, and discussed with respect to their feasibility for large-scale application.

Atomic force microscopy: Emerging illuminated and operando techniques for solar fuel research.

Abstract: Integrated photoelectrochemical devices rely on the synergy between components to efficiently generate sustainable fuels from sunlight. The micro- and/or nanoscale characteristics of the components and their interfaces often control critical processes of the device, such as charge-carrier generation, electron and ion transport, surface potentials, and electrocatalysis. Understanding the spatial properties and structure–property relationships of these components can provide insight into designing scalable and efficient solar fuel components and systems. These processes can be probed ex situ or in situ with nanometer-scale spatial resolution using emerging scanning-probe techniques based on atomic force microscopy (AFM). In this Perspective, we summarize recent developments of AFM-based techniques relevant to solar fuel research. We review recent progress in AFM for (1) steady-state and dynamic light-induced surface photovoltage measurements; (2) nanoelectrical conductive measurements to resolve charge-carrier heterogeneity and junction energetics; (3) operando investigations of morphological changes, as well as surface electrochemical potentials, currents, and photovoltages in liquids. Opportunities for research include: (1) control of ambient conditions for performing AFM measurements; (2) in situ visualization of corrosion and morphological evolution of electrodes; (3) operando AFM techniques to allow nanoscale mapping of local catalytic activities and photo-induced currents and potentials.

Photoelectrochemical Behavior of n-Type GaAs(100) Electrodes Coated by a Single Layer of Graphene

Abstract: The photoelectrochemical behavior of n-type GaAs(100) electrodes coated with a single layer of graphene was compared with the behavior of bare, freshly etched n-type GaAs(100) electrodes, both for electrodes in contact with an aqueous solution containing K3[Fe(CN)6]/K4[Fe(CN)6] and for electrodes in contact with nonaqueous solutions containing a series of one-electron redox couples selected such that the Nernstian solution potentials spanned a range greater than 1 V. Under simulated 1 Sun illumination, the graphene-coated electrodes produced a short-circuit photocurrent density of 20 mA cm–2 for up to 8 h of continuous operation in nonaqueous electrolytes (H2O concentration 0.1%, v/v), while, under the same conditions, the unprotected n-GaAs electrodes showed a rapid decay of the photocurrent density within ∼400 s. Although the graphene monolayers enhanced the stability of n-GaAs photoanodes in nonaqueous electrolytes, the graphene did not fully protect photoanodes operated in contact with Fe(CN)63–/4–(aq...

Techniques and system for analyte detection

Abstract: Techniques are used to detect and identify analytes. Techniques are used to fabricate and manufacture sensors to detect analytes. An analyte ( 810 ) is sensed by sensors ( 820 ) that output electrical signals in response to the analyte. The electrical signals may be preprocessed ( 830 ) by filtering and amplification. In one embodiment, a plurality of sensors are formed on a single integrated circuit. The sensors may have diverse compositions.

Behavior of Electrodeposited Cd and Pb Schottky Junctions on CH3-Terminated n-Si(111) Surfaces

Abstract: n-Si/Cd and n-Si/Pb Schottky junctions have been prepared by electrodeposition of Cd or Pb from acidic aqueous solutions onto H-terminated and CH3-terminated n-type Si(111) surfaces. For both nondegenerately (n-) and degenerately (n+-) doped H–Si(111) electrodes, Cd and Pb were readily electroplated and oxidatively stripped, consistent with a small barrier height (Phib) at the Si/solution and the Si/metal junctions. Electrodeposition of Cd or Pb onto degenerately doped CH3-terminated n+-Si(111) electrodes occurred at the same potentials as Cd or Pd electrodeposition onto H-terminated n+-Si(111). However, electrodeposition on nondegenerately doped CH3-terminated n-Si(111) surfaces was significantly shifted to more negative applied potentials (by −130 and −347 mV, respectively), and the anodic stripping of the electrodeposited metals was severely attenuated, indicating large values of Phib for contacts on nondegenerately doped n-type CH3–Si(111) surfaces. With either Cd or Pb, current–voltage measurements on the dry, electrodeposited Schottky junctions indicated that much larger values of Phib were obtained on CH3-terminated n-Si(111) surfaces than on H-terminated n-Si(111) surfaces. Chronoamperometric data indicated that CH3–Si(111) surfaces possessed an order-of-magnitude lower density of nucleation sites for metal electrodeposition than did H–Si(111) surfaces, attesting to the high degree of structural passivation afforded by the CH3–Si surface modification.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films

Abstract: THE large-scale use of photovoltaic devices for electricity generation is prohibitively expensive at present: generation from existing commercial devices costs about ten times more than conventional methods1. Here we describe a photovoltaic cell, created from low-to medium-purity materials through low-cost processes, which exhibits a commercially realistic energy-conversion efficiency. The device is based on a 10-µm-thick, optically transparent film of titanium dioxide particles a few nanometres in size, coated with a monolayer of a charge-transfer dye to sensitize the film for light harvesting. Because of the high surface area of the semiconductor film and the ideal spectral characteristics of the dye, the device harvests a high proportion of the incident solar energy flux (46%) and shows exceptionally high efficiencies for the conversion of incident photons to electrical current (more than 80%). The overall light-to-electric energy conversion yield is 7.1-7.9% in simulated solar light and 12% in diffuse daylight. The large current densities (greater than 12 mA cm-2) and exceptional stability (sustaining at least five million turnovers without decomposition), as well as the low cost, make practical applications feasible.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Heterogeneous photocatalyst materials for water splitting

Abstract: This critical review shows the basis of photocatalytic water splitting and experimental points, and surveys heterogeneous photocatalyst materials for water splitting into H2 and O2, and H2 or O2 evolution from an aqueous solution containing a sacrificial reagent Many oxides consisting of metal cations with d0 and d10 configurations, metal (oxy)sulfide and metal (oxy)nitride photocatalysts have been reported, especially during the latest decade The fruitful photocatalyst library gives important information on factors affecting photocatalytic performances and design of new materials Photocatalytic water splitting and H2 evolution using abundant compounds as electron donors are expected to contribute to construction of a clean and simple system for solar hydrogen production, and a solution of global energy and environmental issues in the future (361 references)