scispace - formally typeset
Search or ask a question
Author

Navid Mostofi Sarkari

Amirkabir University of Technology
Other affiliations: Middle East Technical University
Bio: Navid Mostofi Sarkari is an academic researcher from Amirkabir University of Technology. The author has contributed to research in topics: Polyethylene & Contact angle. The author has an hindex of 4, co-authored 7 publications receiving 52 citations. Previous affiliations of Navid Mostofi Sarkari include Middle East Technical University.
Topics: Polyethylene, Contact angle, Ultimate tensile strength, Surface modification, Softening point
Papers
More filters
Journal Article•DOI•
Direct plasma treatment approach based on non-thermal gliding arc for surface modification of biaxially-oriented polypropylene with post-exposure hydrophilicity improvement and minus aging effects

[...]

Fahimeh Darvish1, Fahimeh Darvish2, Navid Mostofi Sarkari3, Mohammad Reza Khani1, Esmaeil Eslami2, Esmaeil Eslami4, Babak Shokri1, Mohsen Mohseni3, Morteza Ebrahimi3, Mahdi Alizadeh5, Mahdi Alizadeh6, Chang Fu Dee7 •
Shahid Beheshti University1, Iran University of Science and Technology2, Amirkabir University of Technology3, Université du Québec4, University of Malaya5, University of Zanjan6, National University of Malaysia7
15 Apr 2020-Applied Surface Science
TL;DR: In this article, a single-step gliding arc plasma-based method is investigated for modification of biaxially-oriented polypropylene (BOPP), which can be carried out in a single step and at the atmospheric pressure with minus aging effects and without the unfavorable hydrophobic recovery phenomenon.

27 citations

Journal Article•DOI•
Assessing effects of (3-aminopropyl)trimethoxysilane self-assembled layers on surface characteristics of organosilane-grafted moisture-crosslinked polyethylene substrate: A comparative study between chemical vapor deposition and plasma-facilitated in situ grafting methods

[...]

Navid Mostofi Sarkari1, Navid Mostofi Sarkari2, Öznur Doğan1, Erhan Bat1, Mohsen Mohseni2, Morteza Ebrahimi2 •
Middle East Technical University1, Amirkabir University of Technology2
15 Dec 2019-Applied Surface Science
TL;DR: In this article, 3-aminopropyl trimethoxysilane (APTMS) was used as a silane precursor for vapor-phase deposition on organosilane-grafted moisture-crosslinked polyethylene (Si-XLPE) substrate.

25 citations

Journal Article•DOI•
Surface characterization of an organosilane-grafted moisture-crosslinked polyethylene compound treated by air atmospheric pressure non-equilibrium gliding arc plasma

[...]

Navid Mostofi Sarkari1, Fahimeh Darvish2, Fahimeh Darvish3, Mohsen Mohseni1, Morteza Ebrahimi1, Mohammad Reza Khani2, Esmaeil Eslami3, Esmaeil Eslami4, Babak Shokri2, Mahdi Alizadeh5, Mahdi Alizadeh6, Chang Fu Dee7 •
Amirkabir University of Technology1, Shahid Beheshti University2, Iran University of Science and Technology3, Université du Québec à Chicoutimi4, University of Malaya5, University of Zanjan6, National University of Malaysia7
01 Oct 2019-Applied Surface Science
TL;DR: In this article, surface modification of a silane-crosslinked polyethylene (Si-XLPE) compound was carried out by gliding arc atmospheric plasma, where samples were exposed to the plasma for different durations and the plasma-induced alterations of the surfaces were comprehensively assessed.

18 citations

Journal Article•DOI•
Examining impact of vapor-induced crosslinking duration on dynamic mechanical and static mechanical characteristics of silane-water crosslinked polyethylene compound

[...]

Navid Mostofi Sarkari1, Mohsen Mohseni1, Morteza Ebrahimi1•
Amirkabir University of Technology1
01 Jan 2021-Polymer Testing
TL;DR: In this article, an attempt was made to evaluate the alterations of dynamic mechanical and static mechanical properties of Si-XLPE by increasing the water vapor-triggered crosslinking duration.

9 citations

Journal Article•DOI•
Tethering vapor-phase deposited GLYMO coupling molecules to silane-crosslinked polyethylene surface via plasma grafting approaches

[...]

Navid Mostofi Sarkari1, Navid Mostofi Sarkari2, Öznur Doğan1, Erhan Bat1, Mohsen Mohseni2, Morteza Ebrahimi2 •
Middle East Technical University1, Amirkabir University of Technology2
30 May 2020-Applied Surface Science
TL;DR: In this paper, an attempt was made to deposit and graft GLYMO (3-glycidyloxypropyltrimethoxysilane) self-assembled layers on silane-crosslinked polyethylene (Si-XLPE).

7 citations

Cited by
More filters
Journal Article•DOI•
Chemical Fabrication Strategies for Achieving Bioinspired Superhydrophobic Surfaces with Micro and Nanostructures: A Review

[...]

Shuangshuang Xu1, Qing Wang1, Ning Wang1•
Shandong University of Science and Technology1
01 Mar 2021-Advanced Engineering Materials

83 citations

Book Chapter•DOI•
The General Concepts

[...]

Xue Hanqin
28 Jun 2017
TL;DR: Tag Tags are added in the text box as a comma delimited list, and are used for filtering and selection, and all DAZ 3D default shaders include tags.
Abstract: Tags Tags are added in the text box as a comma delimited list, and are used for filtering and selection. The tags are saved with the shader, and all DAZ 3D default shaders include tags. It is recommended that shaders submitted for sale include tags as well. Material ID Use this to set a color to flag or group particular materials. Material ID is used by Iray in Render Settings > Advanced > (check) Canvases > (click +) Type > Material ID Canvas.

40 citations

Journal Article•DOI•
Direct plasma treatment approach based on non-thermal gliding arc for surface modification of biaxially-oriented polypropylene with post-exposure hydrophilicity improvement and minus aging effects

[...]

Fahimeh Darvish1, Fahimeh Darvish2, Navid Mostofi Sarkari3, Mohammad Reza Khani1, Esmaeil Eslami2, Esmaeil Eslami4, Babak Shokri1, Mohsen Mohseni3, Morteza Ebrahimi3, Mahdi Alizadeh5, Mahdi Alizadeh6, Chang Fu Dee7 •
Shahid Beheshti University1, Iran University of Science and Technology2, Amirkabir University of Technology3, Université du Québec4, University of Malaya5, University of Zanjan6, National University of Malaysia7
15 Apr 2020-Applied Surface Science
TL;DR: In this article, a single-step gliding arc plasma-based method is investigated for modification of biaxially-oriented polypropylene (BOPP), which can be carried out in a single step and at the atmospheric pressure with minus aging effects and without the unfavorable hydrophobic recovery phenomenon.

27 citations

Journal Article•DOI•
Non-thermal plasma technique for preservation of raw or fresh foods: A review

[...]

Parisa Jafarian Asl, Vikky Rajulapati1, Moshen Gavahian2, Ireneusz Kapusta3, Predrag Putnik, Amin Mousavi Khaneghah4, Krystian Marszałek3 •
Indian Institute of Technology Guwahati1, National Pingtung University of Science and Technology2, Rzeszów University3, State University of Campinas4
15 Sep 2021-Food Control
TL;DR: In this article, cold plasma is used as an advanced non-thermal disinfection method for reducing microbial loads on raw or fresh products and packaging materials, and plasma mediated treatments are beneficial enzymatic inactivation and assist with dehydration, resulting in a shelf life extension.

25 citations

Journal Article•DOI•
Assessing effects of (3-aminopropyl)trimethoxysilane self-assembled layers on surface characteristics of organosilane-grafted moisture-crosslinked polyethylene substrate: A comparative study between chemical vapor deposition and plasma-facilitated in situ grafting methods

[...]

Navid Mostofi Sarkari1, Navid Mostofi Sarkari2, Öznur Doğan2, Erhan Bat2, Mohsen Mohseni1, Morteza Ebrahimi1 •
Amirkabir University of Technology1, Middle East Technical University2
15 Dec 2019-Applied Surface Science
TL;DR: In this article, 3-aminopropyl trimethoxysilane (APTMS) was used as a silane precursor for vapor-phase deposition on organosilane-grafted moisture-crosslinked polyethylene (Si-XLPE) substrate.

25 citations